V I V O MOUNT-SPSB4 Universal Soundbar Speaker Wall Mount Instruction Manual
- June 12, 2024
- V I V O
Table of Contents
V I V O MOUNT-SPSB4 Universal Soundbar Speaker Wall Mount
Product Information
The Universal Soundbar Speaker Wall Mount is designed to securely mount your soundbar speaker to a wall. It includes all the necessary hardware for installation on wood, brick, or concrete walls. The mount has a weight capacity of 33 lbs (15 kg) and is suitable for speakers of various lengths.
Product Usage Instructions
- Measure the length of your speaker to determine the proper installation position on the wall.
- Option A: Wood Stud Wall
- Use mounts (A) to mark drilling locations on the wall where studs are located. Make sure the spacing of the mounts does not exceed the length of the speaker.
- Drill 2.2″ (55mm) deep holes using a 3/16″ (4.5 mm) drill bit.
- Attach mounts to the wall using screws (W-A) with washers (W-C).
- Option B: Brick/Concrete Wall
- Use mounts (A) to mark drilling locations on the wall, making sure the spacing of the mounts does not exceed the length of the speaker.
- Drill 2.4″ (60mm) deep holes using a 3/8″ (10mm) drill bit and insert anchors (W-B) into the holes.
- Attach mounts to the wall using screws (W-A) with washers (W-C).
- Adjusting the Mounts
- Loosen the wingnut on the bottom of each mount.
- Adjust the length of the mounts to properly support the speaker.
- Tighten the wingnuts to secure the mounts in place.
- Apply long pads (B) to the front brackets of the mounts and short pads (C) to the rear brackets of the mounts.
- Place the speaker on the mounts.
If you have any questions or need assistance, you can contact VIVO’s support team at help@vivo-us.com or call 309-278-5303. For more information about VIVO products, visit their website at www.vivo-us.com.
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/mount-spsb4
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Email: help@vivo-us.com
Chat Live: www.vivo-us.com Chat live with an agent!
Tel: 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD
STUDS TO MOUNT. We include mounting hardware for brick and concrete walls. If
unsure, please contact us at vivo-us.com, email at help@vivo-us.com, or call
us at 309-278-5303.
TOOLS NEEDED
33 lbs (15 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Measure the length of your speaker for proper installation of the mounts to
the wall.
STEP 2a
OPTION A: Wood Stud Wall Use mounts (A) to mark drilling locations on wall
where studs are located, making sure spacing of the mounts does not exceed the
length of the speaker. Use of a stud finder is highly recommended. Drill 2.2”
(55mm) deep holes using a 3/16” (4.5 mm) drill bit. Attach mounts to wall
using screws (W-A) with washers (W-C). 
STEP 2b
OPTION B: Brick/Concrete Wall
Use mounts (A) to mark drilling locations on wall, making sure spacing of the
mounts does not exceed the length of the speaker. Drill 2.4” (60mm) deep holes
using a 3/8” (10mm) drill bit and press anchors (W-B) into holes. Attach
mounts to wall using screws (W-A) with washers (W-C). 
STEP 3-1
Loosen the wingnut on the bottom of each mount. 
STEP 3-2
Adjust length of mounts to properly support speaker, then tighten the
wingnuts. 
STEP 4
Apply long pads (B) to front brackets of mounts, and short pads (C) to rear
brackets of mounts. 
STEP 5
Place speaker on mounts. 
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 02/07/2022 REV1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
Tel: 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
Chat Live: www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
Email: help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Universal Soundbar Speaker Wall Mount – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>