brennenstuhl WL 550 LED Workshop Light Instruction Manual
- June 12, 2024
- brennenstuhl
Table of Contents
brennenstuhl WL 550 LED Workshop Light Instruction Manual
Operating Instruction
LED Workshop Light WL 550
Attention:
Before using the product, please carefully read the operating instructions
and store them in a proper location!
SAFETY INSTRUCTIONS
-
Always check the product for damage before use.
-
Never use the product in case of any damage. In case you find the product to be damaged, please refer to an electrician or the manufacturer’s service address.
Non-compliance poses a risk of fatal injury from electrical current! -
Do not use the product in potentially explosive atmospheres —danger of death!
-
Keep the floodlight away from children. Children are not aware of the risks posed by electric current.
-
Please never look directly into the light.
-
A destroyed protective cover cannot be replaced. The product must be disposed of.
-
The external flexible line of this lamp cannot be exchanged; if the line is damaged, the lamp has to be scrapped.
Not suitable for applications with external dimmers.
TECHNICAL DATA
Protection class:
IP class/shock resistance: IP65, IK07
Temperature range: -10 °C to +40 °C
Connection cable: HO5RN-F 2×1.0 mm2
Type WL 550
Article number: 1175470010
Nominal voltage: 220-250 V— 50/60 Hz
Power consumption (W): 7
Max. current (A): 0.03
Power factor: 0.948
Max. projected area (cm2): 146
Dimensions (mm): 325x45x35
Dimensions of protective cover (mm): 145x43x35
Weight (kg): 0.625
This product is suitable for indoor and outdoor lighting purposes.
COMMISSIONING
The lamp can be switched on and off at the switch. By repeatedly pressing the switch, the light can be dimmed in steps of 100% – 40% – 10%. The rotatable hook can be extended and swivelled by 360° degrees.
CONTROL ELEMENTS
- LEDs
- Rotatable hook
- On/Off switch
- Cable
CLEANING
Before cleaning, disconnect the product from the power supply. Do not use
solvents, caustic cleaning agents or similar products. Only use a dry or
slightly moistened cloth for cleaning.
MAINTENANCE
ATTENTION: The LED lamp does not contain components that require
maintenance. The light source of this lamp cannot be replaced. If the light
source has reached the end of its service life, the entire lamp has to be
replaced. The lamp may not be opened.
EU DECLARATION OF CONFORMITY
UK DECLARATION OF CONFORMITY
The declaration of conformity is deposited with the manufacturer.
DISPOSAL
Dispose of electric appliances in an environmentally friendly manner!
Electric appliances must not be disposed of in household waste! The European
Directive 2012/19/EU on Waste Electrical and Electronic Equipment rules that
used electric appliances should be collected separately and recycled in an
environmentally friendly manner. For possibilities of disposal of the used
appliance, please contact your local or municipal administration.
For more information, we recommend the Service/FAQs section on our homepage www.brennenstuhl.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>