JOYROOM W17 3In1 Folding Magnetic Wireless Charging Station User Manual

JOYROOM W17 3In1 Folding Magnetic Wireless Charging Station

Product Information

• Product Name: 3-IN-1 Folding Magnetic Wireless Charging Station
• Model: W17 – Type-c Input: DC 5V/3A ; DC 9V/2A
• Type-c Output: DC 5V/3A ; DC 9V/2A ; DC 12V/1.5A
• POGO PIN Input : 2W / 10W
• Wireless Charging Input: 5W/7.5W/10W/15W
• Wired Output: 18W
• Battery Capacity: 5000mAh
• Made in China
• FCC Statement: This device complies with part 15 of the FCC Rules.

Parts Description

For iPhone that supports magnetic wireless charging, please put your device on this product (as shown the figure below), the magnetic suction device will align the device in place and then activate wireless charging. This product can automatically detect wireless charging and discharging, without key operation.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Use presentation instructions

Charging

Use Type-c data cable to charge the power bank through Type-c interface. The attached charging base can be used to charge the power bank through the POGO PIN connection.

Discharge

On the Apple mobile phone with magnetic absorption wireless charging function, it can automatically realize wireless charging of the mobile phone. The wireless charging function is automatically activated when the phone is placed on the wireless charging base (no need to press the power check button). You can also enable the wireless charging function by using the following methods: Press the power check button shortly or power bank access the charger or charging base(The wireless charging indicator lights up and enters the wireless charging standby mode).When the product itself is not charged, press the power check button to turn on the wireless charging function. If it is not put the wireless charging device on, the wireless charging function will be automatically turned off after about 5 seconds. If it is put the wireless charging device on and removed after working, the wireless charging function will be automatically turned off after about 5 seconds. When a wireless charging device is connected, the power bank automatically enables the wireless charging function to charge the connected wireless charging device.

Tips

• Please charge the product full for the first time use.
• When charging this product or using this product to charge other devices,please choose the charger and charging cable with proper specifications.
• When using this product for wireless charging for other devices, if there is a protective cover for other devices, please make sure that the protective cover is made of non-metallic material, the thickness should not exceed 2mm
• Before use the charging base, keep the surface of the base pin and the charging pin clean.
• During the charging process,make sure that someone is nearby. Please remove the power when going out or leaving for a long time.
• After this product is fully charged or this product is fully charged to other devices, please remove the connection cable in time.
• After using the wireless charging function to fully charge other devices, remove the devices in time to avoid loss caused by long-term connection.
• If there is no power indicator after pressing the button, the product may be in the protected status, you can connect to the external charger to try recover it.
• If you do not use this product for a long time, please keep the power of this product in the range of 25%-50% and keep it in a cool and dry environment.
• To longer the battery life,please avoid to keep it full or no power status for a long time.
• Do not place it too close to magnetic card magnetic stripe or chip (ID card, bank card,etc.)
• Otherwise,the magnetic card may become invalid.

Product Usage Instructions

1. Folding Watch Charging:
   • Fold the magnetic side of the charging station upward.
   • Place your watch on the charging area with the magnetic attraction position aligned.
   • The power indicator will show the charging status.
2. Folding Charging Base:
3. Fold the charging base of the station.
4. Use a Type-c data cable to connect the charging base to a power source through the Type-c interface.
5. The attached charging base can be used to charge the power bank through the POGO PIN connection.
6. Wireless Earbuds Charging:
7. Place your wireless earbuds on the wireless charging area.
8. The charging indicator will show the charging status.
9. Stand Status:
10. When using the charging station as a stand, unfold it to the desired position.
11. Place your device on the stand for easy viewing while charging.
12. Folding Status:
13. When not in use, fold the charging station for compact storage or travel.
14. Charging for iPhone with Magnetic Wireless Charging:
15. For iPhones that support magnetic wireless charging, place your device on the product, aligning it with the magnetic attraction position shown in the figure.
16. The magnetic suction will align and activate wireless charging automatically.
17. No key operation is required.
18. Charging and Discharging:
19. Use a Type-c data cable to charge the power bank through the Type-c interface.
20. The power bank can be charged using the attached charging base through the POGO PIN connection.
21. On an Apple mobile phone with magnetic absorption wireless charging function, wireless charging of the phone will be automatically realized.
22. Power Preservation:
23. If you do not use the product for a long time, keep the power of the product within the range of 25%-50%.
24. Store the product in a cool and dry environment.
25. To prolong battery life, avoid keeping it fully charged or at no power status for a long time.
26. Do not place the product too close to a magnetic card, magnetic stripe, or chip (such as ID card, bank card, etc.), as it may invalidate the magnetic card.
27. Name: 3-IN-1 Folding Magnetic Wireless Charging Station
28. Model: W17
29. Type-c Input: DC 5V/3A; DC 9V/2A
30. Type-c Output: DC 5V/3A; DC 9V/2A ;DC 12V/1.5A
31. POGO PIN Input : 2W /10W
32. Wireless charging input: 5W/7.5W/10W/15W
33. Wired output: 18W
34. Battery capacity: 5000mAh

FCC Statement

This device complies with part 15 of the FCC Rules.

Operation is Subject To the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>