Pattfield PE-300MFW 300W Multi Tool Electric Trimmer Saw Instruction Manual

June 12, 2024
Pattfield

Pattfield-LOGO

Pattfield PE-300MFW 300W Multi Tool Electric Trimmer Saw

Pattfield-PE-300MFW-300W-Multi-Tool-Electric-Trimmer-Saw-product-
image

Product Information

  • Product Name: PE-300MFW Multifunktionswerkzeug 300 W
  • Product Description: The PE-300MFW is a multifunctional tool with a power output of 300 W. It is designed for various applications such as grinding, scraping, and sanding. The tool comes with multiple accessories and features for versatile use.

Product Usage Instructions

General Safety Instructions for Power Tools:

  • Always read and follow the user manual and safety instructions before using the tool.
  • Use the tool only for its intended purpose and in accordance with the instructions.
  • Ensure that the tool is used by qualified personnel and with original spare parts.
  • Follow all safety precautions to minimize the risk of accidents.

Using the Tool:

  1. Connect the tool to a power source.
  2. Ensure that the additional handle is securely attached to the tool.
  3. Select the appropriate tool attachment for the desired application.
  4. Adjust the oscillation speed using the speed regulator.
  5. Hold the tool firmly and switch it on using the on/off switch.
  6. Depending on the application, move the tool in parallel lines, circles, or with cross movements.
  7. For scraping and sanding, ensure that the tool is moved slowly and in a controlled manner.
  8. When finished, switch off the tool and disconnect it from the power source.

Additional Handle:

  1. The additional handle can be attached to either side of the tool.
  2. Always ensure that the additional handle is securely attached before using the tool.

Using the Scraper Attachment:

  1. Insert the scraper into the tool holder.
  2. Secure it with the clamping screw and washer.
  3. Ensure that the tool is switched off and disconnected from the power source before attaching or removing the scraper.

Using the Sanding Attachment:

  1. Attach the dust extraction pipe to the tool.
  2. Insert the sanding pad into the tool holder.
  3. Secure it with the clamping screw and washer.
  4. Ensure that the tool is switched off and disconnected from the power source before attaching or removing the sanding pad.

Maintenance and Disposal:

  • Follow the maintenance instructions provided in the user manual to ensure the longevity of the tool.
  • Dispose of the tool and its accessories according to local regulations and guidelines.

Thank you!
We are convinced that this tool will exceed your expectations and wish you joy while using it.
Please read this user manual completely and observe the safety instructions.

Scope of delivery

  • 1x Multi tool
  • 1x Auxiliary handle
  • 1x Hex key
  • 1x Scraper
  • 1x Plunge saw blade
  • 1x Segment saw blade
  • 1x Vacuum tube
  • 1x Vacuum cable bracket
  • 1x Vacuum connector
  • 1x Sanding plate
  • 3x Sanding paper / Grain 60
  • 3x Sanding paper / Grain 80
  • 3x Sanding paper / Grain 120
  • 3x Sanding paper / Grain 240

Pattfield-PE-300MFW-300W-Multi-Tool-Electric-Trimmer-
Saw-01

If any parts are missing or damaged, please contact your HORNBACH Store.

Symbols

Please read this user manual carefully and keep it for further reference.
Warning of accident and injury to per-sons and serious damage to property.
Wear safety glasses for protection of your eyes.
Wear hearing protection for protection of your ears.
Wear dust mask for protection of your respiratory tract.

Pattfield-PE-160KS-1200W-Circular-Saw-13Do not use the tool outdoors or in damp environments.
Protection Class II

Safety Instructions

GENERAL POWER TOOL SAFETY WARNINGS

  • WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term „power tool“ in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  1. WORK AREA SAFETY
    • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
    • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
    • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
  2. ELECTRICAL SAFETY
    • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
    • Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
    • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
    • Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
    • When operating a power tool outdoors, use an extension cord suitable for out-door use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
    • If operating a power tool in a damp location is unavoidable, use a residual cur-rent device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
  3. PERSONAL SAFETY
    • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
    • Use personal protective equipment. Al-ways wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will re-duce personal injuries.
    • Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
    • Remove any adjusting key or wrench be-fore turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
    • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
    • Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
    • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
  4. POWER TOOL USE AND CARE
    • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
    • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
    • Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
    • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
    • Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
    • Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
    • Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
  5. SERVICE
    • Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

MACHINE SPECIFIC SAFETY WARNINGS FOR MULTI TOOLS

  • Use the machine only for dry sanding/sawing/cutting. Penetration of water into the machine increases the risk of an electric shock.
  • Pay attention that no persons are put at risk through sparking. Remove any combustible materials in the vicinity. Sparking occurs when sanding metal materials.
  • Caution, fire hazard! Avoid overheating the object being sanded as well as the sander.
  • Always empty the dust collection system before taking breaks. In unfavorable conditions, e.g., when sparks emit from sanding metals, sanding debris in the dust box, micro filter or paper sack (or in the fil-ter sack or filter of the vacuum cleaner) can self-ignite. Particularly when mixed with remainders of varnish, polyurethane or other chemical materials and when the sanding debris is hot after long periods of working.
  • When working with the machine, always hold it firmly with both hands and pro-vide for a secure stance. The power tool is guided more secure with both hands.
  • Secure the work piece. A work piece clamped with clamping devices or in a vice is held more secure than by hand.
  • Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light alloys can burn or explode.
  • Never use the machine with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Damaged cables increase the risk of an electric shock.
  • Wear protective gloves when replacing a tool in the device. Tools heat up with pro-longed use.
  • Keep your hands away from the area of the saw blade. Do not grip the underside of the workpiece. Contact with the saw blade may result in injury.
  • Use a suitable detector to locate concealed services supply cables / pipes or approach your local public utilities services providers. Contact with electricity cables can lead to fire or electric shock. Damaging a gas pipe can lead to an explosion. Penetration of a water pipe can lead to property damage or to electric shock.
  • If you use the device outdoors, always connect it through a residual current device (RCD) with a maximum trip cur-rent of 30 mA. If using an extension lead, always use one that is approved for outdoor use.
  • Do not touch and/or inhale harmful/toxic dust generated during work. All persons in the vicinity of the work area must wear appropriate personal protective equipment for protection against harmful/toxic dusts. Use the dust extraction facility and keep the work area well ventilated.
  • Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may con-tact hidden wiring or its own cord. Cut-ting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
  • Ensure that there is adequate ventilation when working on plastic, paint, varnish etc.
  • Do not soak the materials or the surface you are about to work on with liquids containing solvents.

Product overview

  1. On / Off switch
  2. Auxiliary handle connector
  3. Tool holder
  4. Speed dial
  5. Power cord
  6. Clamping screw with washer

Pattfield-PE-300MFW-300W-Multi-Tool-Electric-Trimmer-
Saw-02 Pattfield-PE-300MFW-300W-Multi-
Tool-Electric-Trimmer-Saw-03

Intended use
The tool is intended for sawing and cutting wooden materials, plastic, gypsum, non-ferrous metals and fastening elements (e.g. nails, staples). It is also suitable for working soft wall tiles as well as for dry sanding and scraping of small surfaces. It is especially suitable for working close to edges and for flush cutting. The tool is not intended for commercial use. Any other use or modification to the tool is considered use and could cause  as improper considerable dangers.

Using the tool

  1. For sanding place the tool on the workpiece so that the complete sanding paper is in contact.
  2. Make sure your workpiece can not slip and switch the tool on at the on / off switch 1.
  3. Depending on the installed tool and the type of work, set the desired operation speed at the speed dial 4.
  4. Start working, while holding the tool firmly with both hands. Move the tool to the workpiece and push it slowly in the desired direction. For scraping and sanding, move the tool slowly over the workpiece in parallel lines, circles or crosswise movements and successive passes.
  5. Switch the tool off at the on / off switch 1.

Warning! The installed tools may become hot during use. Be careful not to touch them. Burn hazard.

AUXILIARY HANDLE

  1. The auxiliary handle can be attached to the auxiliary handle connector 2 on either side of the tool.
  2. Screw the auxiliary handle into the auxiliary handle connector 2.
    For safe working conditions, make sure the auxiliary handle is always mounted at the tool.

Pattfield-PE-300MFW-300W-Multi-Tool-Electric-Trimmer-
Saw-04

  1. SCRAPER
    Place the scraper on the tool holder 3 and fix it with the clamping screw with washer 6.
    Caution! Make sure the tool is switched off and unplugged.

  2. Securely tighten the clamping screw with washer 6 with the hex key.
    Use the scraper for:
    Carpets, coverings.

  1. PLUNGE SAW BLADE
    Place the plunge saw blade on the tool holder  3 and fix it with the clamping screw with washer 6.
    Caution! Make sure the tool is switched off and unplugged.

  2. Securely tighten the clamping screw with washer 6 with the hex key.
    Use the plunge saw blade for:
    Wood, plastic, plasterboard, other soft materials.

Pattfield-PE-300MFW-300W-Multi-Tool-Electric-Trimmer-
Saw-06

  1. SEGMENT SAW BLADE
    Place the segment saw blade on the tool holder 3 and fix it with the clamp-ing screw with washer 6.
    Caution! Make sure the tool is switched off and unplugged.

  2. Securely tighten the clamping screw with washer 6 with the hex key.
    Use the segment saw blade for: Wood, plastic, non-ferrous metals.

Pattfield-PE-300MFW-300W-Multi-Tool-Electric-Trimmer-
Saw-07

  1. SANDING
    Attach the vacuum tube to the tool and fix it with the vacuum cable bracket. Connect the tool to a suitable dust col-lection system.
    Caution! Make sure the tool is switched off and unplugged.

  2. Place the sanding pad on the tool hold-er 3 and fix it with the clamping screw with washer 6. Pattfield-PE-300MFW-300W-Multi-Tool-Electric-Trimmer-Saw-08

  3. Securely tighten the clamping screw with washer 6 with the hex key.

  4. Align the holes in the sanding paper with the ones in the sanding pad and press the sanding paper into place.
    Use the sanding pad for:
    Wood, paint. Pattfield-PE-300MFW-300W-Multi-Tool-Electric-Trimmer-
Saw-09

Technical Data

  • Nominal voltage 230 V / ~50 Hz
  • Rated power 300 W
  • No-load speed (n0) 15000 – 21000/min
  • Oscilating angle 1.4° left / right
  • Protection Class / II
  • Sound pressure level (LpA) 79 dB(A) / Uncertainty K = 3 dB(A)
  • Sound power level (LWA) 90 dB(A) / Uncertainty K = 3 dB(A)
  • Max. vibration emission (ahw) 14 m/s2 / Uncertainty K = 1.5 m/s2

Noise & Vibration
The declared vibration total value and the declared noise emission values have been measured in accordance with a standard test meth-od (EN 62841-1 & EN 62841-2-4) and may be used for comparing one tool with another. The declared vibration total value may also be used in a preliminary assessment of exposure.

Warning! The vibration and noise emission during actual use of the pow-er tool can differ from the declared total value depending on the ways in which the tool is used, in particular, what kind of work piece is machined.

Warning! It is necessary to identify safety measures to protect the op- erator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).

Try to minimize the impact of vibration and noise. Exemplary measures to reduce vibration exposure include wearing gloves while using the tool, limiting working time, and using accessories in good condition.

Residual risks
Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and dam-age remain. The following dangers can arise in connection with the structure and design of this product:

  1. Injuries and damage to property due to bro-ken application tools.
  2. Danger of injury and property damage caused by flying objects.

Dust collection system
Use of dust collection can reduce dust-related hazards.
To prevent personal injuries, make sure to connect a suitable vacuum cleaner to the vacuum cable bracket. The port is capable of a connector of 35 mm. It can be reduced to 32 mm with the vacuum connector.

Care & Maintenance

Caution! Make sure the tool is switched off and unplugged.

  • Always keep the tool clean, dry and free of oil or grease.

  • Wear safety glasses to protect your eyes whilst cleaning.
    For safe and proper working, always keep the machine and ventilation slots clean.

  • Regularly check to see if any dust or foreign matter has entered the grills near the mo-tor and around the on/off switch. Use a soft brush to remove any accumulated dust.
    If the body of the tool needs cleaning, wipe it with a soft damp cloth. A mild detergent can be used but nothing like alcohol, petrol or other cleaning agent.

    • Never use caustic agents to clean plastic parts.
    • Lubricate all moving parts at regular intervals.
    • Periodically clean the laser generator from sawdust.
    • Periodically check all fixings. These could become loose with time due to vibration.

Caution! If the supply cord is dam-aged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid hazard.

Disposal

The crossed-out wheeled bin symbol requires separate disposal for waste electrical and electronic equipment (WEEE). Such equipment may contain valuable, but dangerous and hazard-ous substances. You are required by law to return these products to a designated collec-tion point for the recycling of WEEE and must not under any circumstances dispose of them as unsorted municipal waste. In this way, you can help to conserve resources and protect the environment.

In Germany, HORNBACH is obliged:

  • To take back old appliances of the same type free of charge in HORNBACH stores when you purchase a new electrical or electronic appliance.
  • To take back up to 3 WEEE of the same type (up to max. 25 cm edge length) free of charge in HORNBACH stores, even if you do not purchase a new appliance.
  • When delivering a new electrical or electronic appliance to a private household, to collect an old appliance of the same type free of charge or to enable you to return it in your immediate vicinity.

For further details, please consult www.hornbach.com or your local authorities.

Children must not play with plastic bags and packaging material, due to the risk of injury and suffocation. Store such material safely or dispose of it in an environmentally friendly way.

Declaration of conformity

CE We declare, that the product described in Technical Data:

300 W Multi Tool PE-300MFW

manufactured for:
HORNBACH Baumarkt AG Hornbachstraße 11 76879 Bornheim / Germany

is in conformity with the following directives:

Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU

and in accordance to the following applicable harmonized standards:

  • EN 60745-1:2009+A11:10
  • EN 60745-2-3:2011+A2:13+A11+A12:14+A13:15
  • EN 55014-1:2017
  • EN 55014-2:2015
  • EN 61000-3-2:2014
  • EN 61000-3-3:2013

Andreas Back
Head of Quality Management, environment & CSR
Person authorised to compile the technical file
Bornheim, 26.11.2019

HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany

Manufactured for
HORNBACH Baumarkt AG Hornbachstraße 11 76879 Bornheim / Germany

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals