Crate Barrel Opie Two-Tone Wood and Cloud Blue Baby Crib Instruction Manual
- June 12, 2024
- Crate Barrel
Table of Contents
Opie Crib
WARNING:
- Failure to follow these warnings and assembly instructions could result in serious injury or death.
- Read all instructions before assembling crib. Keep instructions for future use.
- Do not use this crib if you cannot exactly follow the instructions that come with it.
WARNING:
- For toddler bed use, the minimum age shall be no less than 15 months, and the maximum weight shall not be greater than 50 lb (22.7 kg).
- Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding or mattress under an infant.
- To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
STRANGULATION HAZARD:
- Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child’s neck, such as hood strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to toys for any reason.
- To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
- DO NOT place crib or toddler bed near window or patio door where cords from blinds or drapes may strangle a child.
FALL HAZARD:
- When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large toys and other objects that could serve as steps for climbing out.
- When child is able to climb out or reaches the height of 35 inches (89 cm), the crib shall no longer be used and the child should be placed in a youth or regular bed.
CAUTION: ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4 BY 51 5/8 IN. (69 CM BY 131 CM) WITH THICKNESS NOT EXCEEDING 6 N. (15 CM), AND WHEN IT IS PUSHED FIRMLY AGAINST ANY SIDE OF THIS CRIB, IT DOES NOT LEAVE A GAP OF MORE THAN 1 IN. (3 CM) BETWEEN THE MATTRESS AND ANY PART OF ANY OTHER SIDE OF THE CRIB.
- Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. Contact Crate and Barrel for replacement parts and instructional literature if needed. DO NOT substitute parts.
- If refinishing, use a non-toxic finish specified for children’s products.
- Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
- Infants can suffocate in gaps between crib sides and a mattress that is too small.
- To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean water using a soft cloth, and dry thoroughly.
- Follow warnings on all products in a crib.
- When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood furniture.
v.04 – 07/2018
This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of the product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Please follow the assembly instructions closely. Improper assembly can result in personal or property damage.
WARNING: CHOKING HAZARD – SMALL PARTS
Small parts present in unassembled state. Adult assembly required.
a b c
4 – Small bolts 8 – Medium bolts 4 – Large bolts
4 – Spring washers 4 – Half-moon Bracket 4 – Wood Dowels
1- Allen wrench
2 – End panels
2 – Side panels
1 – Mattress support panel
(1)
Insert 4 wood dowels into the corresponding holes of end panels as shown.
(2)
With the assistance of another adult, align holes of side panels to corresponding holes of end panel. Insert wood dowels of end panel into corresponding holes of side panels as shown.
(3)
Using an Allen Wrench , secure side panels to end panel with 4 medium bolts as shown. With an Allen wrench , secure bottom of side panels to end panel using 2 large bolts and 2 half-moon washers as shown.
(4)
With the assistance of another adult, align holes of side panels to corresponding holes of end panel. Insert wood dowels of end panel into corresponding holes of side panels as shown.
(5)
Using an Allen Wrench , secure side panels to end panel with 4 medium bolts as shown. With an Allen wrench , secure bottom of side panels to end panel using 2 large bolts and 2 half-moon washers as shown.
(6)
- high
- middle
- low
Determine the desired height (high, middle or low) for the mattress support panel.
(7)
Attach mattress support panel to end panels with 4 small bolts using an Allen wrench as shown. Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Once the crib is in use, periodically check to make sure all bolts are tight,
and tighten as necessary. For future use, keep these instructions in the
envelope attached to the mattress support.
MAINTENANCE
Upon completion of assembly be sure all screws, bolts and fastening devices
have been tightened securely. Periodically repeat this check to make sure all
screws, bolts and fastening devices are tight. Before each usage or assembly,
inspect crib for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use crib if parts are missing or broken. DO NOT substitute parts. DO
NOT make any alteration to this crib.
CLEANING
Mix together a mild solution of gentle dishwashing liquid and water, apply to
crib surface using a soft clean cloth lightly dampened in the solution. Rinse
with clean water again using a soft clean cloth, then dry all surfaces
thoroughly with a soft dry cloth. NO ABRASIVE CLEANERS, SCOURING PADS, STEEL
WOOL OR COARSE RAGS SHOULD BE USED TO CLEAN THIS FINE FURNITURE.
STORAGE
An envelope is attached to the crib for the storage of the assembly directions
for future referral. After completing the assembly process you are advised to
read and beware of all WARNINGS, CAUTIONS, CLEANING, STORAGE, USE AND
MAINTENANCE notices contained in these instructions. We caution you not to
place excess hardware in the envelope as it could present danger to a child if
retrieved and it could also puncture the crib mattress. For long term storage
of the crib, store in a cool, dry place and keep away from moisture and
extreme temperature changes. (R02 – 07/2018)
Made in Shanghai – r02 800.967.6696 | crateandbarrel.com
Documents / Resources
|
Crate Barrel Opie Two-Tone Wood and Cloud Blue Baby
Crib
[pdf] Instruction Manual
Opie Two-Tone Wood and Cloud Blue Baby Crib, Opie, Two-Tone Wood and Cloud
Blue Baby Crib, Wood and Cloud Blue Baby Crib, Cloud Blue Baby Crib, Blue Baby
Crib, Baby Crib, Crib
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>