SMM548 US IM Singing Machine Karaoke Machine Microphone Instruction Manual
- June 5, 2024
- Singing Machine
Table of Contents
SMM548 US IM Singing Machine Karaoke Machine Microphone
Important Safety Information
- Read these Instructions.
- Keep these Instructions.
- Heed all Warnings.
- Follow all Instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place objects filled with water, such as a vase, on the apparatus.
- CAUTION: To reduce the risk of fire or explosion, do not expose batteries to excessive heat such as sunshine, fire or other heat sources.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks and logos by The Singing Machine Company, Inc. is under license. Other trademarks and trade names are those of their respective owners.
Specifications
AUDIO SECTION
- Output Power: 3.5 Watts (RMS)
- Output Impedance: 4 Ohms
BLUETOOTH
- Bluetooth Version: V5.0
- Working Distance: Up to 10 meters measured in open space
- HEADPHONE SECTION: 3.5 mm Stereo headphone jack
POWER SECTION
- Battery: Lithium ion battery 3.7 V 1,200 mAh
- Input Power: Micro USB DC 5 V 1 A
- DIMENSIONS (each mic): 3.4 x 2.2 x 10 (inches) / 8.6 X 5.5 X 25.3 (cm)
- WEIGHT (each mic): 0.25 (kgs) / 0.55 (lbs)
Troubleshooting Guide
Should this unit exhibit a problem, check the following before seeking
service:
No Power
- Power is not on; press and hold the / button to turn power on.
- Confirm that the unit is charged.
No Sound – General
• Volume is set to minimum; raise volume of your Bluetooth music device by its volume control.
No sound from the microphone
- Microphone volume is set to minimum; raise microphone volume by pressing VOL + button up.
Bluetooth reception failure
- Put the external Bluetooth device close to the unit.
- Pair the unit with the Bluetooth Device as the procedures stated in this manual.
Before you get started
EXIT “TRY ME” MODE
Press and hold the / button 2 seconds or charge the unit to exit the “TRY
ME” mode.
CHARGING THE UNIT
- Insert the included USB charging cable into the unit’s micro USB port u.
- Plug the other end of the cable into a computer’s USB port or other USB charging device (not included). We recommend to charge the unit 4 hours to ensure it is fully charged.
- The speaker will light in red and slowly flash while the unit is charging. The light will turn off once the unit is fully charged.
NOTE: Please charge the unit when you see the light on the speaker flashing red.
CONNECTING HEADPHONES
For private listening or to monitor singing, use headphones (not included).
Insert headphones into the Headphones jack v.
Energy Saving Mode (Auto Power System-APS)
The unit will automatically switch off after 30 minutes in the following
situations:
- There is no singing into the microphone;
- The Bluetooth music has been stopped.
The unit can be switched on again by pressing and hold /button. APS is for energy saving purposes.
Manual instructions
USB Charging Cable
Operation
-
Press and hold the / button to turn the unit on; the power indicator will light.
-
You can adjust the microphone volume by pressing the VOL + or – button.
-
There are 6 built-in voice changers in this unit. When press the FX or button the speaker light will change. The voice will change when the singer starts to sing through the microphone.
- Purple light – ECHO
- Pink light – FEMALE
- Orange light – MALE
- Lime light – CHIPMUNK
- Cyan light – ROBOT
- Blue light – RADIO.
- Select white (NONE) to sing without any voice effect.
-
To sing without the lead singer on the recording, press the VOCALS button. To resume the lead singer, press the VOCALS button again.
Note: Lead vocal removal may work better on some songs than others. -
The unit automatically searches for and pairs a previously paired Bluetooth device (if previously paired). If no previously paired devices are present and you cannot find this unit on your bluetooth compatible device’s search list. Press and hold the button to start the bluetooth pair mode, the indicator will start flashing blue and red for 60 seconds. Select and pair “Singing Machine” on your bluetooth compatible device’s search list. A chime and solid blue light will indicate pairing is successful.
Notes :- If your Bluetooth device prompts you for a passcode during the pairing process, please enter “0000” to connect. If pairing fails, repeat steps. If you have paired before, a list of previously searched results will be displayed. Select “Singing Machine” again. On some Bluetooth devices (i.e.,computers), once pairing is complete, you must select your Bluetooth device as “Use as Audio Device” or similar.
- To avoid excessive over amplified sound output, it is recommended that the volume control is initially adjusted to one third or less and then increase if required.
- PLAY/PAUSE: Press the Play/Pause button on the Bluetooth device or button on the unit to start.
- Press and hold the button to disconnect any paired device in order to pair another device, the indicator will turn flashing blue and red.
-
The microphone can be easily located on top of the unit. You can always sing through it when the unit has been switched on.
Warnings
DRIPPING WARNING: This DO NOT OPEN product shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed
on the product.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized change or
modification is made. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>