HUDORA 71653 Portable Basketball Hoop Instructions

: June 12, 2024
: hudora

Table of Contents

HUDORA 71653 Portable Basketball Hoop
PARTS LIST
ASSEMBLY
TRANSPORTING THE STAND
TECHNICAL SPECIFICATIONS
CONTENTS
GENERAL TRAINING PRINCIPLES
SAFETY INSTRUCTIONS
INSTRUCTIONS ON ASSEMBLY
MAINTENANCE AND STORAGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUDORA 71653 Portable Basketball Hoop

HUDORA-71653-Portable-Basketball-Hoop-product

PARTS LIST

backboard

basketball ring

net

Connecting tube for board

Upper vertical tube

Middle vertical tube

Lower vertical tube

base section

axle

wheels

Left diagonal strut

Right diagonal strut

Cover for base

Screw M5 x 20 mm

Screw M8 x 62 mm

Grub screw for tube fixing

M8 x 10 mm

Screw M8 x 18 mm

Screw M8 x 53 mm

Ø 6.5 flat washers, outside Ø16

(for screws of no. 14)

M5 nuts

(for screws of no. 14)

M8 nuts

(for screws of no. 15/17/18)

Ø 8.5 flat washers, outside Ø 24

(for screws of no. 17)

Ø 8 flat washers, outside Ø 18

(for screws of no. 15/18)

ASSEMBLY

$HUDORA-71653-Portable-Basketball-Hoop-fig- $1$$ $HUDORA-71653-Portable-Basketball-Hoop-fig- $2$$ $HUDORA-71653-Portable-Basketball-Hoop-fig- $3$$ $HUDORA-71653-Portable-Basketball-Hoop-fig- $4$$ $HUDORA-71653-Portable-Basketball-Hoop-fig- $5$$

TRANSPORTING THE STAND

$HUDORA-71653-Portable-Basketball-Hoop-fig- $6$$

CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private / domestic use only. This product is not designed for commercial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Basketball stand All Stars 205
Item number: 71653, 71655, 71656/01
Height-adjustable: 165 – 205 cm
Purpose: Portable training rack for basketball throwing exercises.
If you have assembly problems or would like further information on the product, we have all you need and more at http://www.hudora.de/.

GENERAL TRAINING PRINCIPLES

1. Warm up:
Warm up before each training session. Walking or running on the spot and light stretching exercises are excellent for warming up.
2. Breathing:
Correct breathing plays an important role in training. Breathe calmly and evenly. Never hold your breath while training.
Clothes and space:
Wear comfortable sports clothing when training. Always wear sports shoes; never train in bare feet, sandals, socks or tights.
Warm down:
Use light stretching to warm down again after training. This allows the pulse to drop slowly and allows the body to regenerate itself more quickly for the next session, as the decomposition of metabolic wastes (lactates) is better achieved through carrying out these movements at the end.
Health:
Stop the exercise program immediately if you feel a tightening in your muscles or any general pain when carrying out the exercises. For your own safety, please contact a doctor.

USE : Make sure this piece of equipment is positioned securely and firmly. Adjust the length of time you train to your capacities and do not over-exert yourself.
WARNING : As a matter of course, you should consult your doctor before starting the training.

SAFETY INSTRUCTIONS

This training equipment is NOT a toy! Use the basketball stand for its intended purpose only.
This piece of training equipment is only suitable for private use. If it is used commercially, any guarantee is invalidated.
Warnings! The stand must be properly secured at all times to prevent toppling.
Place the basketball stand on a firm and level surface and make sure this piece of equipment is positioned securely and firmly.
Always fill the base with sand (or water) so that the stability of the basketball stand is assured and it won’t fall forwards. We would recommend filling the base with sand rather than water as water will flow out if there is a hole. This could cause the product to fall over and cause damage to objects or injury to people.
Check that all connections have been tightly fastened before using the basketball stand and check again later!
Before each use, check that the basketball stand is set up correctly and never use it if it is not working properly.
Check the basketball stand regularly for defective parts and replace them. Use original spare parts only.
Do not climb up the basketball stand.
Do not hang off the basket or make slam dunks, the basketball stand could tip over.
Never allow children to play in the immediate proximity of this piece of training equipment without supervision and never let them assemble it.
Never use the basketball stand near water or leave it outside in the rain.
Wear suitable clothing when training. The clothes must be constituted in such a way that they cannot catch in anything during the training due to their fit.
Always wear training shoes, and never train in bare feet, or when wearing sandals, socks or stockings.
Never wear jewellery which could catch in the basketball basket.
If you start to feel unwell, discontinue training immediately.
When permanently irradiated with UV light, the material ages significantly faster.

To avoid premature aging and thereby extend the service life, you should always store the product in a dry and dark place when not in use. Do not permanently expose the product to wind, moisture, extreme temperatures or sunlight

TOOLS REQUIRED

8 mm hexagonal wrench
13 mm hexagonal wrench
hammer (not supplied)
Screwdriver (not supplied)

INSTRUCTIONS ON ASSEMBLY

Step 1: Use a pencil to mark the lower vertical tube (7) at the conical end at a height of 6 cm. Slide the middle vertical tube (6) with high physical strength as far as possible onto the lower vertical tube. Make sure that the drill holes in the lower tube (7) and the outer threads of the middle tube are aligned. The fully assembled middle tube should cover the marking so that this is no longer visible. (Fig. 1)
Step 2: Place the connected tubes at the intended position on the base-moulded part (8). The middle thread at the upper end of the middle tube (6) must be aligned towards the rear. Slide the axle (9) through the wheels (10) as well as through the drill holes in the lower vertical tube (7) and the base-moulded part (8). (Fig. 2)
Step 3: Connect the base-moulded part (8) and the lower vertical tube (7) with the two diagonal struts (11 + 12). Use the screws (17) and the flat washers (22) on the base, the screw (15) and the flat washer (23) as well as the nut (21) on the lower vertical tube. (Fig. 3)
Step 4: Fill the base-moulded part (8) with sand (or water) and close it with the cover (13). (Fig.4)
Step 5: Mount the net (3) on the basket ring (2). (Fig. 5)
Step 6: Connect the basket ring (2), the board (1) and the rear connection tube (4) with each other. You should for this purpose use the screws (14), flat washers (19) and nuts (20). (Fig. 6)
Step 7: Loosen the grub screw (16) of the connection tube (4) and mount it together with the basket and board on the upper vertical tube (5). You should for this purpose use the screw (18), flat washer (23) and nut (21). Ensure that the groove (recess) in the upper tube (5) is aligned to the rear (Fig. 7). Then firmly retighten the grub screw (16) of the connection tube.
Step 8 – Height adjustment: Loosen the grub screw (16) of the middle tube (6) and insert the upper vertical tube (5) to the desired height into the middle tube (6). Then firmly retighten the grub screw (16). The height of the basket can be steplessly varied between 165 cm and 205 cm. Make sure that the upper tube is inserted at least 17 cm into the middle tube in the fully assembled condition. The marking line on the upper tube should thereby not longer be visible. (Fig. 8)
WARNING : The height of the basket ring must never exceed 205 cm from the ground.
WARNING : Never use the basketball stand without first having filled the base section with water or sand.

TRANSPORTING THE STAND

Grasp the central post with both hands and fix the base with your left foot. Tilt the basketball stand towards you until you can move it using the mounted wheels. Once you have transported the stand to where you want it, return it carefully to an upright position.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used any more. If in any doubt, please contact our service team (http://www.hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.

DISPOSAL ADVICE

At the end of the product’s life, please dispose of it at an appropriate collection point in your area. Local waste management companies will be able to answer your questions on this.

SERVICE

We make every effort to deliver faultless products. If faults do arise however, we put just as much effort into rectifying them. You can find numerous information on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.

Hersteller: HUDORA | Jägerwald 13 | 42897 Remscheid | Germany
www.hudora.de
Art.-Nr. 71653, 71655,
71656/01
Stand 04/22
1/16