HUDORA 71663 Chicago Basketball Stand Instruction Manual

: June 12, 2024
: hudora

Table of Contents

HUDORA 71663 Chicago Basketball Stand
Product Information
Product Usage Instructions
ASSEMBLY
TRANSPORTING THE STAND
TECHNICAL SPECIFICATIONS
CONTENTS
GENERAL TRAINING PRINCIPLES
SAFETY INSTRUCTIONS
TOOLS REQUIRED
ASSEMBLY INSTRUCTIONS
MAINTENANCE AND STORAGE
DISPOSAL ADVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUDORA 71663 Chicago Basketball Stand

$HUDORA-71663-Chicago-Basketball-Stand $10$$

Product Information

Product Name: Basketbal Hoop Stand
Model Number: 71663, 71658
Languages: German (DE), English (EN), Italian (IT), Spanish (ES), French (FR), Dutch (NL), Polish (PL), Russian (RU)

Parts List:

1	backboard	1 x
2	basketball ring	1 x
3	net	1 x
4	Upper left strut	1 x
5	Upper middle strut	1 x
6	Upper right strut	1 x
7	Upper vertical tube	1 x
8	Middle vertical tube	1 x
9	Lower vertical tube	1 x
10	base section	1 x
11	axle	1 x
12	wheels	2 x
13	Lower left strut	1 x
14	Lower right strut	1 x
15	Cover for base	1 x
16	Screw M5 x 32 mm	4 x
17	Screw M8 x 75 mm	1 x

18

| Grub screw for

tube fixing M8 x 10 mm

|

5 x

19| Screw M8 x 65 mm| 1 x
20| Screw M8 x 20 mm| 4 x
21| Screw M5 x 22 mm| 3 x

22

| Flat washers Ø 5.5, outer Ø 15

(for screws of no. 16/21)

|

11 x

23| Nuts M5

(for screws of no. 16/21)

| 7 x
24| Flat washers Ø 8.5 (for screws of no. 17/19/20)| 12 x
25| Nuts M8

(for screws of no. 17/19/20)

| 6 x

26

| Plastic washers Ø 5.2 (for screws of no. 16/21)|

7 x

Product Usage Instructions

Start by assembling the base section (10) by attaching the wheels (12) to the designated holes using the screws provided.
Attach the lower left strut (16) and lower right strut (17) to the base section (10) using the screws M5 x 32 mm (23).
Connect the upper left strut (4), upper middle strut (5), and upper right strut (6) to the corresponding positions on the backboard (1) using the screws M8 x 75 mm (19).
Attach the upper vertical tube (7), middle vertical tube (8), and lower vertical tube (9) to the assembled struts using the screws M8 x 65 mm (20).
Insert the axle (11) into the designated holes on the lower vertical tube (9) and secure it with the screw M8 x 20 mm (21).
Attach the basketball ring (2) to the upper vertical tube (7) using the nuts M5 (23).
Install the net (3) onto the basketball ring (2).
Ensure all screws and nuts are tightened securely before using the basketball hoop stand.
Adjust the height of the basketball hoop stand as desired by sliding the tubes up or down and securing them with the nuts M8 (24).
The basketball hoop stand is now ready for use. Enjoy playing basketball! Note: Please refer to the user manual in your preferred language for detailed diagrams and step-by-step instructions

ASSEMBLY

$HUDORA-71663-Chicago-Basketball-Stand $1$$ $HUDORA-71663-Chicago-Basketball-Stand $3$$ $HUDORA-71663-Chicago-Basketball-Stand $5$$ $HUDORA-71663-Chicago-Basketball-Stand $6$$

TRANSPORTING THE STAND

$HUDORA-71663-Chicago-Basketball-Stand $8$$

Grasp the central post with both hands and fix the base with your left foot. Tilt the basketball stand towards you until you can move it using the mounted wheels. Once you have transported the stand to where you want it, return it carefully to an upright position.

CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private/domestic use only. This product is not designed for commercial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Basketball stand Chicago 260
Item number: 71663, 71658
Height-adjustable: 206 – 260 cm
Purpose: Portable training rack for basketball throwing exercises.

If you have assembly problems or would like further information on the product, we
have all you need and more at http://www.hudora.de/.

GENERAL TRAINING PRINCIPLES

Warming up:
Warm up before each exercise routine. Walk or run in place, stretch or light ca-listhenics as a warm-up before using the home trainer.
Respiration:
The correct respiration plays an important roll in training. Breathe quietly and uni-formly. Never stop breathing during training.
Clothing and place:
Dress in comfortable clothing during training and see that you have a sufficient place for the execution of the exercises. Always wear sport shoes, do not train with bare feet, sandals, or stockings.
Cooling down:
Cool yourself down after the training with easy stretching or calisthenics. This way your heart rate can slowly decrease and the body can regenerate more quickly for the next exercise routine because the metabolic waste (Lactate) can be more efficiently disposed of with slow cool downs.
Health:
Quit your exercise immediately if you notice a pulling in the muscles or general pain as you practice. Contact a physician for your safety.
USE : Ensure that the equipment is in a firm and stable position. Adapt the training time to your performance capabilities, and do not over-tax yourself.
WARNING: As a matter of course, you should consult your doctor before starting to train.

SAFETY INSTRUCTIONS

This training equipment is NOT a toy! Use the basketball stand for its intended purpose only.
This piece of training equipment is only suitable for private use. If it is used commercially, any guarantee is invalidated.
Warnings! The stand must be properly secured at all times to prevent toppling.
Place the basketball stand on a firm and level surface and make sure this piece of equipment is positioned securely and firmly.
Always fill the base with sand (or water) so that the stability of the basketball stand is assured and it won’t fall forwards. We would recommend filling the base with sand rather than water as water will flow out if there is a hole. This could cause the product to fall over and cause damage to objects or injury to people.
Check that all connections have been tightly fastened before using the basketball stand and check again later!
Before each use, check that the basketball stand is set up correctly and never use it if it is not working properly.
Check the basketball stand regularly for defective parts and replace them. Use original spare parts only.
Do not climb up the basketball stand.
Do not hang off the basket or make slam dunks, the basketball stand could tip over.
Never allow children to play in the immediate proximity of this piece of training equipment without supervision and never let them assemble it.
Never use the basketball stand near water or leave it outside in the rain.
Wear suitable clothing when training. The clothes must be constituted in such a way that they cannot catch in anything during the training due to their fit.
Always wear training shoes, and never train in bare feet, or when wearing sandals, socks or stockings.
Never wear jewellery which could catch in the basketball basket.
If you start to feel unwell, discontinue training immediately.
When permanently irradiated with UV light, the material ages significantly faster. To avoid premature aging and thereby extend the service life, you should always store the product in a dry and dark place when not in use. Do not permanently expose the product to wind, moisture, extreme temperatures or sunlight.

TOOLS REQUIRED

8 mm Allen key
13 mm Allen key
Hammer (not supplied)
Spirit level (not supplied)
Cross-head screwdriver

ASSEMBLY INSTRUCTIONS

Step 1: Place the lower vertical tube (9) on the basemoulded part (10) at the intended position. Slide the axle (11) through the wheels (12) as well as the drill holes in the lower vertical tube and in the basemoulded part (Fig. 1)
Step 2: Connect the base -moulded part (10) with the two lower diagonal struts (13 + 14) and the lower vertical tube (9). You should for this purpose use the screw (20) on the base -moulded part, the screw (17) on the lower vertical tube, as well as on both screw flat washers (24) and nuts (25). (Fig. 2)
Step 3: Fill the base-moulded part (10) with sand (or water) and close it with the cover (15). (Fig. 3)
Step 4: Loosen the two grub screws (18) of the lower vertical tube (9) and insert the middle vertical tube (8) into the lower tube. Make sure that the middle grub screw of the middle tube is aligned backwards. Then firmly retighten the grub screw (18) of the lower vertical tube (9). (Fig. 4)
Step 5: Mount the net (3) on the basket ring (2). (Fig. 5.1 and 5.2)
Step 6: First insert the plastic washers (26) from the rear side into the 4 drill holes on the bottom side of the basket board. Then connect the basket ring (2), the board (1) and the upper vertical tube (7) with each other. You should for this purpose use the screws (16), flat washers (22) and nuts (23). (Fig. 6)
Step 7: First insert the plastic washers (26) from the rear side into the upper 3 drill holes of the basket board. Connect the board (1) and the upper vertical tube (7) from the bottom up in the order 4, 5, 6 with the diagonal struts. You should for this purpose use on the board the screws (21), flat washers (22) and nuts (23), on
the top tube, the screw (19) as well as flat washer (24) and nut (25). (Fig. 7)
Step 8 – Height adjustment: Loosen the grub screw (18) of the middle tube (8) and insert the upper vertical tube (7) to the desired height into the middle tube (8). Then firmly retighten the grub screw. The height of the basket can be steplessly varied between 206 cm and 260 cm. Make sure that the upper tube is inserted at least 11 cm into the middle tube in the fully assembled condition. The marking line on the upper tube should thereby not longer be visible. (Fig. 8)
WARNING: The height of the basket ring must never exceed 260 cm from the ground.
WARNING: Never use the basketball stand without first having filled the base section with water or sand.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used any more. If in any doubt, please contact our service team (http://www.hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.

DISPOSAL ADVICE

At the end of the product’s life, please dispose of it at an appropriate collection point provided in your area. Local waste management companies will be able to answer your questions on this.

SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just as much effort into rectifying them. Therefore, you can find numerous infor-mation on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.

Hersteller: HUDORA