muse M-620 SH Bookshelf Speakers User Manual

muse M-620 SH Bookshelf Speakers

Product Information

The M-620 SH is a passive speaker that offers high-quality sound reproduction. It is equipped with various connectivity options, including Bluetooth, Optical, Coaxial, AUX, and USB, allowing you to enjoy your favorite music, movies, and dialogues.

The speaker features a remote control for convenient operation. It has a range of controls, including volume adjustment, sound effects selection (music, movie, dialog), and playback controls for skipping tracks and play/pause functionality.

The package includes a remote control, AC adaptor, and an RCA cable for connecting the two speakers.

Product Usage Instructions:

1. Before operating the speaker, read the instructions carefully.
2. To power on/off the speaker, use the power button labeled “:” on the unit or the remote control.
3. To select the desired function mode (Bluetooth, Optical, Coaxial, AUX, or USB), use the corresponding button labeled “:” on the unit or the remote control.
4. To adjust the volume level, use the volume control knob or the volume buttons on the remote control.
5. To adjust the treble and bass levels, use the respective control knobs on the unit.
6. To select sound effects (music, movie, dialog), use the corresponding button on the unit or the remote control.
7. If using the Optical mode, ensure that your audio source is in PCM format.
8. To connect the two speakers, use the supplied RCA cable.
9. To power the speaker, connect the supplied AC adaptor to an AC mains supply within the range of 100-240V 50/60Hz.
10. When not in use, the speaker will automatically switch to Standby mode after 15 minutes of inactivity.

Battery Installation:

1. Before using the remote control, insert 2 AAA/UM4 batteries, ensuring correct polarity (+/-) based on the markings inside the battery compartment.
2. For battery disposal, consult your distributor for specific recycling options. Do not throw batteries in fire and avoid exposing them to excessive heat.

LOCATION OF CONTROLS

1. Remote sensor
2. Function LED indicator
3. : To turn unit on/off.
4. : To select desired function mode: Bluetooth, Optical, coaxial, AUX or USB.
5. EQ : To select desired sound effects: music, movie, dialog.
6. Optical in jack (OPT)
7. Coaxial jack (COAX)
8. LINE IN L/R jacks
9. VOLUME control: To adjust volume.
10. TREBLE control: To adjust the treble level.
11. BASS control: To adjust the bass level.
12. USB port allowing MP3 playback
13. SPEAKER OUT jack
14. DC IN jack
15. SPEAKER IN jack

Remote control

1. R1. : To turn unit on/off.
2. R2. MUTE : To mute or restore sound.
3. R3. VOL +/- : To adjust the volume level.
4. R4. : To skip to previous track
5. R5. : To skip to next track
6. R6. : Play/ pause
7. R7. OPT : To select optical mode.
8. R8. USB : To select USB mode.
9. R9. COAX : To select coaxial mode.
10. R10. BT : To select Bluetooth mode.
11. R11. LINE : To select aux mode.
12. R12. MUSIC/ MOVIE/ DIALOG : To select desired sound effects: music, movie, dialog.

Installing Battery

Insert 2 “AAA/ UM4” batteries to the remote control prior to use. Make sure to match their polarities (+/-) to the markings inside the compartment.

Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling.

NOTES:

• Never recharge the batteries, apply heat to them or take them apart.
• If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by battery leakage corrosion.
• Attention should be drawn to the environmental aspects of battery disposal.
• Do not throw batteries in fire!
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

ACCESSORIES

Remote control x1
AC adaptor x1
RCA cable (L/R speaker connection cable) x1

SPEAKER CONNECTION
Use the supplied RCA cable to connect the two speakers.

POWER SUPPLY
The supplied AC adaptor is suitable for use on AC mains supplies of 100-240V 50/60Hz and should only be connected to a mains supply within these parameters.

Cautions:

• The AC adaptor included with this unit is for its use only. Do not use it with other equipment.
• Turn off the unit before unplugging the AC adaptor from the unit so as to avoid the unit being damaged.
• When the unit is not going to be used for long time, disconnect the AC adaptor from the AC outlet.
• Be sure to use it near the wall outlet and easily accessible. If a malfunction occurs, disconnect the plug from the wall outlet at once.
• AC adaptor is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the AC adaptor of the apparatus shall be disconnected from the mains socket outlet completely.
• Never use an AC adaptor that is damaged, route power lead in a safe manner and make sure it is not subjected to trapping or pinching. If the power lead is damaged refer to a qualified service agent.
  In a concern of saving energy, when playback has reached to the end or listening volume is set at a very low level and no control is operated on the device for a period of 15 minutes, the unit will automatically switch to Standby mode.

TURNING UNIT ON/OFF
Press button to turn on the unit. Press again on the remote control or long press on unit to turn off the unit.

SELECTING FUNCTION

The function mode is selected by pressing the button on unit repeatedly or pressing BT, OPT, COAX, LINE or USB button on the remote control respectively.

Observe the color of the function LED indicator for different modes:

• Red: Standby
• Blue: Bluetooth
• White: Optical
• Green: Coaxial
• Yellow: Aux (Line in)
• Purple: USB

Notes:

• Once insert the USB device to the USB port of unit, it will switch to USB mode automatically.
• USB mode can be selected by button on unit or USB button on remote control only when the USB device is connected to the unit.

BLUETOOTH FUNCTION

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by New One S.A.S is under license. Other trademarks and trade names are those of their respective owners.

Pairing a Bluetooth Device

1. When the unit is ON, press button on unit repeatedly until the function LED indicator becomes blue, or press BT button on remote control to select Bluetooth mode directly. The function LED indicator will blink fast indicating it’s in pairing mode.
2. On the Bluetooth device, enable Bluetooth and select “MUSE M-620 SH” from the Device List. (Refer to the user manual of the device to be connected for detailed operations.) If the Bluetooth device prompts for a pass code, use “0000”. Some Bluetooth devices will ask you to accept the connection. You will hear an indication sound when pairing is successful. The function LED indicator will blink slowly.
   Tip: If you want to connect your Bluetooth speaker to another Bluetooth audio device, press and hold BT button to disconnect the current device, and then follow the steps above to make a new connection.

• On some devices such as computers, once paired you must select the unit from the Bluetooth menu and choose “Use as Audio Device (stereo)” or similar.
• Pairing remains intact when the unit and/or your Bluetooth device is taken out of communication range. An active connection will be re-established when your Bluetooth device returns within range.
• When the unit is turned on again, it will automatically try to reconnect with the most recently paired Bluetooth device.

Using a Bluetooth Device

1. With a unit paired (see previous section), operate your Bluetooth device and its sound will be heard through the M-620 SH’s speakers.
2. Press button on remote control to pause playback. Press again to resume playback.
3. Select desired track with < /> on remote control.
4. Adjust the volume using the Volume buttons. You can also adjust the volume on the device to which you are paired.
   Note: The function LED indicator will stay lit during playback.
   Hereby, NEW ONE S.A.S, declares that this MUSE M-620 SH is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at www.muse- europe.com

CONNECTING WITH EXTERNAL DEVICES

To OPTICAL IN jack
Connect your audio source to the OPT jack on unit with a digital optical audio cable (cable not included)

1. Press button on unit repeatedly or press OPT button on remote control to select OPT mode. The function LED indicator will become white.
2. Start playback from your audio source.
3. Adjust the volume to desired level.
4. To stop playback, disconnect your audio source from this unit.
   Note: OPTICAL IN is for PCM format only.

To coaxial jack
Use the coaxial cable (not included) to connect the soundbar to the coaxial input jack on your TV or amplifier. Press button on unit repeatedly until the function LED indicator becomes green, or press COAX button on remote control to select coaxial mode directly.

To LINE IN RCA jacks

1. Connect your auxiliary source (e.g. DVD player) to the LINE IN L/R jacks on back of unit with RCA audio cable (cable not included).
2. Press button on unit repeatedly until the function LED indicator becomes yellow, or press LINE button on remote control to select AUX mode directly.
3. Start playback from your auxiliary source.
4. Adjust the volume to desired level.
5. To stop playback, disconnect your auxiliary source from the LINE IN L/R jacks.

USB PLAYBACK

1. Connect an USB device to the USB port on unit. It will switch to USB mode and start playback automatically. The function LED indicator will become purple.
2. Select desired track with < /> on remote control.

Notes:

• USB mode can be selected by button on unit or USB button on remote control only when the USB device is connected to the unit.
• The total number of MP3 files on the USB device should not exceed 999.
• The device may not contain more than 99 directories.
• The reading time takes about a few seconds or more depending on the amount of MP3 files and folders on USB device.
• Do not put anything other than a USB device to the port of this unit. Other objects may damage the USB mechanism.
• The USB socket must not be connected to the computer directly, for that may damage the unit.
• There are many USB devices in the market. We cannot guarantee to support all different models. Please try another USB device if your device is not supported.

TECHNICAL SPECIFICATION

POWER SUPPLY:

• AC ADAPTOR:
• Input: AC 100-240V 50/60Hz
• Output: DC 19.0V 1.89A 35.91W

BLUETOOTH

• Bluetooth Version: V5.0
• Bluetooth: 2.402-2.480GHz
• RF Output Power: 5.34 dBm
• Working Distance: Up to 10 meters measured in open space (wall and structures may affect range of device)
• Remote working distance: Up to 8 meters, +/- 30 degree

Specifications are subject to change without notice.

SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside the unit. Refer all servicing to qualify personnel.

The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of “dangerous voltage” inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The Caution mark is located at the back of the device.

IMPORTANT!

• The use of apparatus in moderate climates.
• The Marking plate is located at the back of the device.
• Make sure to have a minimum distance of 5 cm around the unit for sufficient ventilation.
• Ensure that the ventilation openings is not covered with items such as newspapers, tablecloths, curtains, etc.
• Do not place naked flame sources, such as lighted candles on the apparatus.
• Do not expose this appliance to dripping or splashing water.
• Do not place objects filled with liquids, such as glass, vase on the device.
• Do not throw batteries into fire! Respect the environment when disposing of used batteries.
• Batteries should not be exposed to excessive heat such as sunshine, fire or other similar heat source.
• AC adaptor is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the AC adaptor of the apparatus shall be disconnected from the mains socket outlet completely.
• Under the influence of fast transient and / or electrostatic electric phenomenon, the product may malfunction and the user must perform a power reset of the device.
• The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in other location.
• If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)

NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France

References

• MUSE Electrical – Discover our collection ! - MUSE
• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>