U S GENERAL 56230 26 Inch Single Bank Top Chest Instructions

U S GENERAL 56230 26 Inch Single Bank Top Chest

Product Information

This is the owner’s manual and safety instructions for a product. It provides information on assembly, operating, inspection, maintenance, and cleaning procedures. The product’s total combined weight capacity is 550 lb. The manual also includes important safety information and precautions to prevent serious injury or death.

Product Usage Instructions

1. Before using the product, read the entire important safety information section at the beginning of the manual.

2. Check if all parts are intact and undamaged when unpacking. If any parts are missing or broken, contact customer support at 1-888-866-5797.

3. Tools required for assembly and service may not be included.

4. Assemble the product according to the provided instructions.
   Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

5. Ensure the assembly area is clean, well lit, and free from bystanders.

6. Do not assemble when tired or under the influence of alcohol, drugs, or medication.

7. Assemble the product on a flat, level, hard, and smooth surface capable of safely supporting a fully loaded chest.

8. To prevent serious injury and death from tipping:

   • Do not sit, stand, or climb on the item.
   • Do not allow children to play with or near the item.
   • Use only on a flat, level, hard, and smooth surface capable of safely supporting a fully loaded chest.
   • Do not lift while loaded.

9. Do not exceed weight capacities, evenly distributed from bottom up. Be aware of dynamic loading, as sudden load movement may briefly create excess load causing product failure.

10. Do not open more than one drawer at once.

11. Empty, close, and lock drawers before moving.

12. Use the product as intended only.

13. Inspect the product before every use and do not use if parts are loose or damaged.

14. Maintain product labels and nameplates. If unreadable or missing, contact Harbor Freight Tools for a replacement.

For assembly instructions, refer to page 3 of the manual. For operation instructions, refer to page 4 of the manual.

WARNING: Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Specifications

• Total Combined Weight Capacity(Evenly distributed from bottom up.): 550 lb

IMPORTANT SAFETY INFORMATION

Assembly Precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply to properly and completely assembled product only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Chest.

Use Precautions

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
2. This product is not a toy nor a toy chest. Do not allow children to play with or near this item.
3. Do not exceed weight capacities, evenly distributed from bottom up.
   • Be aware of dynamic loading!
   • Sudden load movement may briefly create excess load causing product failure. Do not exceed capacity of bench or shelf supporting Top Chest.
4. Do not open more than one Drawer at once.
5. Empty, close, and lock Drawers before moving.
6. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Chest.
7. Do not lift while loaded.
8. Use as intended only.
9. Inspect before every use; do not use if parts are loose or damaged.
10. Maintain product labels and nameplates.
    • These carry important safety information.
    • If unreadable or missing, contact
    • Harbor Freight Tools for a replacement.

Assembly Instructions

WARNING: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.

1. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Chest.
2. Locate the Keys, label them, then put them in a safe place.
3. Note: The Bottom Cabinet and Top Chest have different sets of keys.
4. Attach Handles (1) to both sides of the Chest using four Handle Screw and Washer Sets (2).
5. Choosing location:
   • a. If stacking Top Chest on Bottom Cabinet, refer to Bottom Cabinet Owner’s Manual for Final Assembly, Operation and Maintenance Instructions.
   • b. If using Top Chest separately from Bottom Cabinet, refer to Operation and Maintenance Instructions on page 5.

Operation Instructions

WARNING: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.

1. Empty all Drawers.
   Note: Lid must be open for Drawers to be unlocked.

2. Close all Drawers and lock them.

3. If stacked on Bottom Cabinet, to prevent tipping, If using separately from Bottom Cabinet, hold both handles securely and carry the Chest to the desired location. Have someone assist as needed.

4. Place only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Chest.

5. Unlock Drawers and fill Chest evenly, from bottom to top. Do not exceed weight capacities.

Maintenance and Servicing

WARNING: Procedures not specifically explained in this document must be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged, have the problem corrected before further use.

1. PERIODICALLY, inspect the general condition of the Chest. Check for:
2. Wipe external surfaces of the Chest with clean cloth.
3. Lubricate Drawer Slides as needed.
   • loose hardware,
   • misalignment or binding of moving parts,
   • cracked or broken parts,
   • any other condition that may affect its safe operation.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Parts List and Diagram

Parts List

Record Serial Number Here
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Parts may not be interchangeable. Specify UPC when ordering parts:

• Yellow: 792363562300
• Green: 792363562317
• Orange: 792363562324

Assembly Diagram

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

• 26677 Agoura Road
• Calabasas, CA 91302
• 1-888-866-5797

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.

• Visit our website at : http://www.harborfreight.com
• Email our technical support at: productsupport@harborfreight.com

Copyright© 2022 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions, please call 1-888-866-5797. Item 56230 56231 56232

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>