HUDORA 72200 Nestschaukel Lounge Instruction Manual

: June 12, 2024
: hudora

Table of Contents

PARTS LIST
TECHNICAL SPECIFICATIONS
CONTENTS
SAFETY INSTRUCTION
INSTRUCTIONS ON ASSEMBLY
HANGING DEVICE AND ADJUSTMENT
MAINTENANCE AND STORAGE
DISPOSAL ADVICE
SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUDORA 72200 Nestschaukel Lounge Instruction Manual

PARTS LIST

1| Parts Last | 4 x
---|---|---
2| | 4 x
3| | 2 x
4| | 2 x
5| | 1 x
6| | 2 x

CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private/domestic use only. This product is not designed for commercial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Nest Swing Lounge 90 | 110
Item No.: 72200, 72201, 72202 | 72210, 72211, 72212
Maximum carrying capacity: 150 kg
Dimension: 90 cm Ø | 110 cm Ø
Minimum age for use: 3 years
Purpose: Device powered by muscle power, for swinging in a sitting or lying position

If you have assembly problems or would like further information on the product, we have all you n0eed and more at http://www.hudora.de/.

SAFETY INSTRUCTION

WARNING! Maximum load cannot exceed 150kg.
WARNING! Minimum user age: 3 years.
WARNING! Only for domestic use.
WARNING! To be used under the direct supervision of an adult.
WARNING! Not suitable for children under 36 months. Danger of falling!
WARNING! Not suitable for children under 36 months. Long cord. Strangulation hazard. Small parts. Choking hazard.
WARNING! Suitable for outdoor and indoor use!
The owners of the swing as well as the competent supervisory personnel are responsible for ensuring that all users follow the instructions in the operation manual.
Do not make any technical modifications.
Changes to the original product must only be carried out according to manu-facturer specifications.
No one is permitted to gain access to the swing area during use.
Never stand or kneel on the swing.
Always hold yourself firmly with both hands.
No objects of any kind must be in the vicinity of the swing zone (trees, walls, fences, clotheslines).
Make sure that you have a safety clearance of at least 2 m (front and back) beyond the maximum reach of the swing and make sure the ground is level and shock absorbing (e.g. grass) without any sharp edges or pointed objects, obstacles, inclines, levels, steps or hard surfaces (e.g. concrete) etc.
Clearance to stationary components on the side, such as the swing scaffolding must be at least 40 cm.
Swinging components, such as a neighboring swing must be placed at a distance of at least 60 cm.
Maximum raised height must not exceed 2.5 meter as measured from the ground.
In idle mode, the swing must be at least 40 cm and maximally 60 cm from the ground.
You should never install a swing in such a way that the user could be blinded by sun rays.
When permanently irradiated with UV light, the material ages significantly faster. To avoid premature aging and thereby extend the service life, you should always store the product in a dry and dark place when not in use. Do not permanently expose the product to wind, moisture, extreme temperatures or sunlight.

INSTRUCTIONS ON ASSEMBLY

Prior to installation, carefully select and check the location where you will install the swing. Please make sure that the swing carrier is adequately stable. Please also take into account that swinging produces centrifugal forces that can put a lot of strain on the swing carrier. Please consult an expert (statics expert, architect, carpenter) and ask how much load your swing carrier can tolerate.Suspension connectors shall be of a design that will prevent unintentional disconnection. After removing the product from its packaging, please check it for completeness. Spread out the nest (5) of the swing on the floor so that the HUDORA logo can be read facing upwards. Insert part of the foam-sheathed tubular frame (1) into each of the tunnel loops of the nest. Make sure that a straight tube end matches up with a tapered tube end in each case. The tubes are not connected together yet. (Fig. 1) First attach the two swing cables (6). One swing cable is mounted on each side of the nest swing at the front and back. Proceed as follows: First place one of the two connecting elements (2) located at the end of the cable with side A on the straight tube end. Now insert the tapered tube end from the other side (side B) through the connecting element into the straight tube and connect them with the push buttons. Do the same with the second rope on the opposite side. The two free rope ends are now opposite each other so that the nest swing can be folded in the middle. Now connect the two corners that still need to be connected by sliding them together into the joints (fig. 2). Now you can hang up the fully assembled nest swing on a suitable swing support using the retaining rings (3)
Instruction on Assembly

HANGING DEVICE AND ADJUSTMENT

The hanging points must be at least as far apart as the swing seat + 100mm. The swing is packaged with two ropes and adjustment eyelets (4), so that the height of the swing can be variably aligned with any suitable hanging device. The swing rope (6) can be lengthened or shortened by pushing or pulling it through the adjustment loops (4). The hanging swing can now be individually adjusted. No one should sit on the swing while making the adjustments. When extending or reducing the length of the swing ropes please make sure that the ropes remain equally long at all times. If the lengths of the ropes differ, this will lead to circular pendulum movements of the swing. Make sure that swing is set up in such a way that the person using the swing cannot reach the ground with the tips of his or her toes. If in doubt, perform a few gentle test swings.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used any more. If in any doubt, please contact our service team (http://www.hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.

You should also replace all the plastic parts after a maximum of 5 years to prevent a possible failure of these parts.

Check the product for damage or traces of wear and tear before and after each use.
We also recommend before each use:

to lubricate moving parts in order to minimize wear.
to check all covers of sharp edges and replace if necessary
to replace defective parts according to the manufacturer‘s instructions
to check swing seats, chains, ropes and other means of attachments for evidence of deterioration

DISPOSAL ADVICE

At the end of the product’s life, please dispose of it at an appropriate collection point in your area. Local waste management companies will be able to answer your questions on this.

SERVICE

We make every effort to deliver faultless products. If faults do arise however, we put just as much effort into rectifying them. You can find numerous information on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.

Hersteller: HUDORA I Jägerwald 13 I 42897 Remscheid I Germany www.hudora.de