JOYROOM JR-WQM03 Magnetic Wireless Charger User Manual

JOYROOM JR-WQM03 Magnetic Wireless Charger

Product Information

• Product Name: JR-WQM03 Magnetic Wireless Chargers
• Name: JR-WQM03
• Material: ABS+ PC fireproof material
• Input: 5V 3A, 9V 2A, 12V 1.8A
• Wireless Output: 5W/7.5W/10W/15W
• Size: 58.16*8.4mm
• Net Weight: 60g

Product Usage Instructions

1. Ensure that you have a wall adapter with a power output of 18W, 20W, or higher.
2. If your wall adapter has a USB-C port, connect the USB-C adapter to it. If your wall adapter has a USB-A port, connect the USB-A adapter to it.
3. If your device has a USB-C input, use the USB-C to USB-A connector to connect the Magnetic Wireless Charger to your device.
4. Make sure the charger is connected securely and properly.
5. Avoid any physical actions that may cause damage to the charger, such as knocking, throwing, trampling, or squeezing it.
6. Avoid charging high-power devices to prevent damage caused by excessive power.
7. Avoid using the charger in wet environments or during thunderstorm weather.
8. Do not clean the charger with strong chemicals or cleaning agents.
9. Avoid dropping or throwing the charger violently and keep it away from collisions as it is an electronic product.

Precautions

• Keep the charger away from children.
• Improper use may damage the product or endanger personal and property safety.
• Non-professionals are strictly prohibited from disassembling the product.
• Do not use the charger with electrical appliances or loads that exceed its output current.

Tips

• Improper use may damage the product or endanger personal and property safety.If you have any questions or need assistance, please contact our customer support
• Email: support@joyroom.com
• Lifetime Warranty Code: 132650

FCC Warning Statement

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Product Parameter

Packing list

• Wireless Charger 1, User Manual 1

Product introduction

The product is a magnetic wireless charger that can charge iP phone mag-safe series wirelessly. Its unique hollow shape and separated PCBA design can effectively improve heat dissipation. It comes with a 2-to-1 fast charging cord, so that you can choose fast chargers more freely. The braided cord is super flexible and supports repeated bending. The product is also designed with multiple protections for safer charging, including over-current protection, over-voltage protection, short-circuit protection, over- temperature protection, anti-interference protection, and more.

Function diagram

Precautions

1. Please keep it away from children.
2. Improper use may damage the product or endanger personal and property safety.
3. Non-professionals are strictly prohibited to disassemble this product.
4. Electrical appliances or loads that exceed the output current of this product are prohibited (automatic protection will be activated and no output will be given).
5. Avoid fierce physical actions, including knocking, throwing, trampling, squeezing, etc.
6. Do not charge high-power devices to prevent device damage caused by excessive power.
7. Do not use it in wet environment or thunderstorm weather.
8. Do not clean the device with strong chemicals, cleaning agents, etc.
9. Do not drop or throw it violently and please keep it from collision considering this product is an electronic product.

Tips

• Improper use may damage the product or endanger personal and property safety.
• We hope you never have the need, but if you do, our service is friendly and hassle-free.

1. Activate the lifetime warranty for you!
2. If you need help, our solutions will hyper drive to you within 12 ours.

FCC Warning Statement

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
• However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• This device complies with part 15 of the FCC Rules.
  Operation is subject to the following two conditions

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

For FAQs and more information, please scan
Lifetime Warranty Code
132650
support@joyroom.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>