rizoma ZVP044 Air Inlet Cover User Manual
- June 12, 2024
- rizoma
Table of Contents
rizoma ZVP044 Air Inlet Cover
Rizoma Product Information
| Product Name | Part Number | Difficulty Level | Estimated Assembly Time |
|---|---|---|---|
| Copertura presa d’aria Air inlet cover | ZVP044 | Facile (Simple) | 5-10 minutes |
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personnel. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future. RIZOMA accepts
no liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or failure
to observe all the assembly instructions. We also invite you to comply with
the provisions of the Highway Code and Traffic rules and/or to additional
regulations in force in your Country.
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike. Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components. Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others, also make sure that the temperature of the exhausts and the engine are similar to the ambient temperature.
WARNING:
TO CLEAN YOUR COVER DON’T USE LIQUID OR SPRAY ENGINE CLEANER, DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR COVER, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
SMONTAGGIO COPERTURA ORIGINALE DISASSEMBLE ORIGINAL COVER
Attention: when disassembling the cover be careful not to damage the original crankcase.
MONTAGGIO COPERTURA INSTALL COVER
Attention: insert the cover tooth into the original carter housing and finally insert the cylindrical turrets into the original rubbers. To facilitate assembly, apply a slight layer of grease on the original rubbers.
Product Usage Instructions
- Read and understand the user manual carefully. These instructions are an essential part of the product. If you have any doubts regarding the installation or use of the product, contact an authorized RIZOMA dealer for assistance.
- For correct installation, tighten all fasteners after positioning the accessories correctly. Avoid forcing the moving parts once they are locked to ensure the product’s integrity and proper functioning.
- After installing any Rizoma product, check that all related components of the motorbike (e.g., brakes, throttle, clutch, lights, and steering) are functioning properly. It is recommended to periodically repeat these checks, especially after long trips or prolonged periods of not using the bike.
- Your RIZOMA products require regular inspection and maintenance. Inspect them more frequently if you ride frequently. If your products show signs of leakage, bending, deformation, cracking, chipping, or wear, even if minor, have a RIZOMA dealer inspect them before riding again. Never attempt to repair or modify Rizoma products or their components; always replace with Rizoma original components.
- Rizoma products may not be compatible with your motorcycle or other aftermarket equipment installed previously. For safety reasons, always consult your RIZOMA dealer.
Warnings:
- Ensure that the tires are inflated to the correct pressure and free from any tread or sidewall damage.
- The actions depicted in the manual are performed by professionals under strictly controlled riding conditions.
RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury. The action depicted is performed by professionals under strictly controlled riding conditions. Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy. All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor. Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.