V I V O MOUNT-HHCT1 Hydraulic Hinges for Coffee Table Instruction Manual
- June 12, 2024
- V I V O
Table of Contents
V I V O MOUNT-HHCT1 Hydraulic Hinges for Coffee Table Instruction Manual
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. Instruction Manual
https://vivo-us.com/products/mount-hhct1
WARNING
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED
PACKAGE CONTENTS
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
Place Hydraulic Hinges (A) inside of the coffee table so that the top mounting
bracket is flush with the top of the table. Measure the distance from the font
of the hinges to the inside edge to make sure both hinges are even. Open both
hinges and mark mounting holes using a pencil.
STEP 2
Predrill marked mounting holes using a drillbit based on the appropriate
mounting hardware for your coffee table. Secure Hydraulic Hinges (A) to the
coffee table using the appropriate mounting hardware and a Phillips
screwdriver.
STEP 3
Close Hydraulic Hinges (A) and mark the coffee table on either side of the top
bracket using a pencil.
STEP 4
Place the coffee table lid on the coffee table and mark the lines from the
coffee table onto the lid. Extend Hydraulic Hinges (A) and place the coffee
table lid on top so that the marked lines line up with the top brackets. Mark
mounting holes using a pencil. Remove the lid and predrill marked mounting
holes using a drillbit based on the appropriate mounting hardware for your
coffee table. Secure the lid to Hydraulic Hinges (A) using the appropriate
mounting hardware and a Phillips screwdriver.
Costumer Support
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any
parts are received damaged or defective, please contact us. We are happy to
replace parts to
ensure you have a fully functioning product.
309-278-5303 AVG. RESOLUTION TIME
(within office h
www.vivo-us.com AVG. RESOLUTION TIME (within office
hrs): < 15 M
help@vivo-us.com AVG. RESPONSE TIME (within office
hrs): 1HR 8M
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Pneumatic Hinges for Coffee Table (x2) – VIVO - desk solutions, screen mounting, and more