Saiyin DS6403 36-Inches Stereo TV Sound Bar System User Manual
- June 12, 2024
- Saiyin
Table of Contents
- Saiyin DS6403 36-Inches Stereo TV Sound Bar System
- Important Notes
- Important Safety Instructions
- Package Contents
- Features and Specifications
- System Overviews
- Setting Up the Systems
- Using the systems
- Troubleshootings
- Care and Maintenances
- FAQ’s
- Video- Product Introduction
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Saiyin DS6403 36-Inches Stereo TV Sound Bar System
Important Notes
Before using the TV sound bar system, please read the following important notes.
- Please read this user manual carefully and save it for future reference. For optical and coaxial cable connection, change your source device’s audio output setting to “PCM” format. Refer to your source device’s user manual for more information.
- For better sound quality, please set the volume of the soundbar to 75 percent of the maximum ( Note: the maximum volume drop 3 levels is 75 percent) and set the volume of your source device to a suitable level.
- To get a better sound effect, press the movie, music, or news button on the remote control to select a suitable sound mode.
The recommended sound mode selections are as below:
Program source | Sound mode | Program source | Sound mode |
---|---|---|---|
Strong bass film | Music or news | Strong bass music | Music or news |
General film | Movie or music | Pop music | Movie or Music |
Documentary | Music or news | Light Music | Music or news |
Variety show | Music or news | News / Dialog | Music or news |
- The sound mode selection and the volume settings are saved in the memory even after the sound bar is powered off, and the volume settings from 75 percent to maximum will be saved to 75 percent.
- For an audio cable connection, you can boost/restore the volume by double-clicking the boost button on the remote control.
- The audio output of the sound bar is affected by the settings of the connected source. If necessary, adjust the settings of the source to improve the audio output.
- Not all remote control functions can be found on the soundbar. Please keep the remote control properly.
- Disconnect the power adapter from the electrical outlet to power off your sound bar completely.
- The lightning flash with the arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated, dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
- The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user to the presence of important operating and maintenance instructions in this user manual.
Important Safety Instructions
- Do not make unauthorized alterations to the system, doing so may compromise the safety, and regulatory compliance, and may void the warranty.
- This system contains magnetic material, contact your physician if you have questions on whether this might affect the operation of your implantable medical device.
- Do not place naked flame sources, such as lighted candles, on or near the system.
Safety instructions
Follow all safety instructions, and keep the user manual for further use!
- Check that the power supply voltage and current rating correspond with the power supply details shown on the system rating label before connecting the system to the main power supply.
- Never use a system that is damaged! Disconnect the system from the power supply and contact your supplier if it is damaged.
- The danger of electric shock! Never try to repair the system yourself. In the event of any malfunction, repairs are to be conducted by qualified personnel only.
- Warning! The system should not be used near water. Do not operate the system with wet hands or while standing on a wet floor.
- Warning! This system must be used indoors. It is neither designed nor tested for use outdoors, in recreational vehicles, or on boats.
- Do not open the system casing under any circumstances. Do not insert any foreign objects into the inside of the casing.
- Never use accessories that are not recommended by the manufacturer. They could pose a safety risk to the user and might damage the system. You must therefore use original accessories only.
- The system is only suitable for use at moderate degrees of latitude. Do not use it in the tropics or in particularly humid climates.
- Keep the system away from any hot surfaces and open flames. Always operate the system on a level, stable, clean, and dry surface. Protect the system against heat and cold, dust, direct sunlight, moisture, dripping, and splashing water.
- This system is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or by those who lack experience and knowledge unless they have been given supervision and instruction concerning the use of the system by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the system.
- This system is classified as protection class II and must not be connected to protective ground.
- Regularly check the power plug and power cord for damage. If the supply cord is damaged. The adapter cannot be used and need to replace.
- Avoid damage to the power cord. Do not crush, squeeze, bend, or scour on sharp edges. Keep the power cord away from hot surfaces and naked flames.
- Lay the cables in such a way that nobody can inadvertently pull them or trip over them.
- Do not pull the plug out of the socket by the power cord, and do not wrap the power cord around the system.
- If an extension cord is used, its capacity needs to be suitable for the power consumed by the system.
- Connect the power adapter to an easily reachable electrical outlet so that in case of an emergency the system can be unplugged immediately, Pull the power adapter out of the electrical outlet to completely switch off the system, Use the power adapter as the disconnection device.
- Disconnect the power adapter from the electrical outlet when not in use and before cleaning.
- Always switch the system off before disconnecting the power adapter.
- Caution! Only use this system with the supplied power adapter.
- Caution! In the event of a malfunction as a result of electrostatic discharge and momentary electrical surges, unplug the system and plug it in again.
- Make sure that no electrical wire, water, gas, or other lines are located around the installation location.
- Ensure that there is sufficient ventilation, and keep a minimum distance of 2 inches (5cm) between the system and other objects or walls.
Battery precautions
Follow these precautions when using a battery in this device.
- Use only the size and type of battery specified.
- Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment, a reserved battery may cause damage to the device.
- Do not mix different types of batteries together (e.g.: Alkaline and Carbon-zinc) or old batteries with fresh ones.
- If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible leakage.
- Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow the battery manufacturer’s instructions.)
- The batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
- Clean the battery contacts and also those of the device prior to battery installation.
FCC information
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Package Contents
1 X Soundbar
Accessories:
- 1 X Power adapter
- 1 X User manual
- 1 X Remote control
1 X Optical cable
1 X Coaxial cable
1 X Audio cable (RCA to RCA)
1 X Audio cable (stereo 1/8 inch(3.5mm) to RCA)
2 X Wall mount brackets
4 X Wall anchors
4 X Screws (M4 X 30mm)
Note: Accessories are subject to change without notice.
Features and Specifications
Features
- Total 50 W power usage
- 36 inches TV soundbar
- 2.0 Channel two-way speaker system
- 6 speaker drivers (4 woofers and 2 tweeters)
- Analog audio interface (AUX input)
- Digital audio interface (optical input and coaxial input)
- Stream music from a smartphone or tablet
- The sound bar system can be mounted on the wall
- Full-function infrared remote control
- Digital controlled audio processing sound mode
Specifications
Power supply
- Input: 100-240VAC 50/60Hz
- Output: 15VDC 2.4A ( OCP>5.2A )
- Protection class: Class II
- Energy efficiency level: Level VI
- Remote control: 2 X 1.5V AAA batteries (not supplied)
Soundbar
- Output power: 25W X 2 (50W)
- Frequency response: 70Hz – 20KHz
- Signal-to-noise ratio: 80dB ( A-weighting)
- Total harmonic distortion: -70dB (A-weighting) Less than 0.5W
- Digital audio interfaces: Optical and coaxial
- Audio format: PCM
- Sampling frequency: 32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz
- Sampling bit-rate resolution: 16 to 24 bit
Note: Specifications are subject to change without notice.
System Overviews
Front view
Buttons
-
Mode (Source)
-
Play / Pause
-
Power (Standby)
-
Volume down
-
Volume up
Source indicators -
OPT (Optical)
-
COAX (Coaxial)
-
Power (Standby)
-
BT (Bluetooth)
-
AUX (Auxiliary)
-
Speaker driver (Tweeter)
-
Speaker driver (Woofer)
-
Remote control sensor
-
Optical input socket
Connector panel**** -
Coaxial input socket
-
AUX input sockets
-
SUB output socket
-
DC IN socket
Note: SUB output socket is only for the powered subwoofer (not supplied) or wireless subwoofer (not supplied) connection.
Remote control
Buttons
- 20. Power
- 21. Bluetooth
- 22. HDMI
- 23. Volume +
- 24. Previous
- 25. Play pause/mute
- 26. Next
- 27. Volume
- 28. Movie
- 29. Music
- 30. News
- 31. Optical
- 32. Coaxial
- 33. AUX/boost
Note: HDMI button is only for the HDMI converter (not supplied).
Setting Up the Systems
Unpacking
- Remove all packaging.
- Check for the presence of all parts and for transport damage. In case of damage or incomplete delivery, please contact your dealer.
- Please keep the packaging. The system can be stored in it, if not used for a longer period of time.
Preparation
- The Soundbar system serves as an audio output device and features wireless and wired connections. You can place the sound bar on a horizontal surface or mount it on a wall.
When mounting it on a wall, pay attention to the following:
- The supplied wall mount brackets, wall anchors, and screws can be used to fix the
- sound bar to a wall. The wall mount brackets are designed for vertical walls constructed
- of solid concrete, bricks, or wood.
- When installing on a cinder block wall, first verify that the blocks have a minimum of 1.2
- inch (3cm) of actual concrete wall thickness to be used for the wall anchors.
- If you are uncertain about the construction of your wall, please consult a qualified
- contractor or installer for assistance.
- Ensure that the wall anchors and screws you use are stronger enough to support the
- weight of the sound bar and long enough to sufficiently grip the wall.
- It is strongly recommended to use the supplied wall anchors and screws.
- Additional tools (not included) are required for the installation.
- Do not over-tighten screws.
- Use an electronic stud finder to check the wall type before drilling and mounting.
- During mounting, keep away children and pets.
- Make sure the soundbar is mounted within reach of a wall outlet.
Caution!
When placing the sound bar on an entertainment center, bookshelf, or any type
of enclosed space, be sure to allow at least 2 inches (5cm) of space around
the sound bar for ventilation. If the sound bar is enclosed in a tight space,
without ventilation, heat generated from the sound bar could produce a
potential heat hazard.
-
Caution!
Make sure the power adapter is disconnected from the electrical outlet before making any mounting and connection. -
During operation, if the cables require to be reconnected, the power adapter must be disconnected first, otherwise, damage to the system may result.
Wall mounting
-
The distance between the two brackets.
DS6501: 32.60inches(82.8cm) DS6502: 32.52inches(82.6cm)
DS6503: 32.13inches(81.6cm) DS6505: 31.97inches(81.2cm) -
Mark the position and drill 4 holes in the wall.
-
Insert 4 wall anchors into the holes, use a hammer if necessary.
-
Use 4 screws to mount the brackets to the wall. Secure the screws.
-
Hang the sound bar onto the brackets. Make sure they are firm and stable.
Optical and coaxial cable connection
- Use the supplied optical cable or coaxial cable to connect the sound bar to a TV, DVD, Blu-Ray Player, or other suitable devices.
- Connect one end to the optical or coaxial out socket of the TV, DVD, Blu-Ray Player, or other suitable devices.
- Connect the other end to the optical or coaxial input socket of the soundbar.
Note: For optical and coaxial cable connection, change your source device’s audio output setting to “PCM” format. Refer to your source device’s user manual for more information.
Audio cable connection 1
- Use the supplied RCA to RCA audio cable to connect the sound bar to a TV, DVD,
- Blu-Ray Player or other suitable devices.
- Connect one end to the headphone or line out socket of the TV, DVD, Blu-Ray Player, or other suitable devices.
- Connect the other end to the AUX(L/R) input sockets of the soundbar.
Note: For audio cable connection, you can boost/restore the volume by double-clicking the boost button on the remote control.
Audio cable connection 2
- If your TV or other source device only has a headphones socket, use the supplied stereo 1/8 inch (3.5mm) to RCA audio cable to connect the sound bar to your TV or other source devices.
- Connect one end to the headphones socket of the TV or other source devices.
- Connect the other end to the AUX(L/R) input sockets of the soundbar.
- Ensure your TV speakers are turned on. Refer to your TV’s user manual for more information.
- Set your TV or other source device’s volume to the maximum.
Note: For audio cable connection, you can boost/restore the volume by double-clicking the boost button on the remote control.
Using the systems
Using the remote control >>> Inserting/replacing batteries
- Slide to open the battery compartment cover.
- Insert 2 X 1.5V AAA batteries (not supplied) into the battery compartment. Match the polarity markings in the battery compartment.
- Close the battery compartment cover.
Caution!
- The sound bar can only work with the remote control package included, not compatible with universal remote control.
- Always insert the batteries according to the correct polarity markings.
- Use only high-quality batteries, low-quality batteries might leak and cause damage. Remove the batteries from the remote control if you are not using it for an extended period. The remote control could become damaged in case of battery leakage.
Tips for usage
- If the remote control does not work properly, replace the batteries.
- Make sure there are no obstacles between the remote control and Soundbar.
The remote control may be less effective if:
- There are obstacles between the remote control and the infrared receiver.
- Other remote controls are operated at the same time.
- The battery power is low.
Using the remote control >>> Remote control operation range:
Notes:
- When there is an obstacle between the remote sensor of the sound bar and the remote control, the remote control may not operate
- When direct sunlight, an incandescent lamp, a fluorescent lamp, or any other strong light shines on the remote sensor of the sound bar, the operation of the remote control may be unstable
Caution!
- Not all remote control functions can be found on the soundbar. Please keep the remote control properly.
Get the power and started
Make sure all the source connections are made properly before you connect the power adapter. Plug the power adapter into the DC IN socket, then into a suitable electrical outlet. The power indicator lights up red. Indicating the sound bar is in standby mode.
- Turning off your TV speakers: To avoid hearing distorted sound, turn off your TV speakers. Refer to your TV’s user manual for more information.
- Power on your sound bar: Press the Power button on the sound bar or remote control. The power indicator lights up green.
- Check if the sound is coming from the soundbar.
Selecting a digitally controlled audio processing sound mode
-
The digitally controlled audio processing includes three sound modes: movie, music, and news.
( Note: There is no sound mode indication on the sound bar) -
To get a better sound effect, press the movie, music, or news button on the remote control to select a suitable sound mode.
The recommended sound mode selections are as below:
Program source | Sound mode | Program source | Sound mode |
---|---|---|---|
Strong bass film | Music or news | Strong bass music | Music or news |
General film | Movie or music | Pop music | Movie or Music |
Documentary | Music or news | Light Music | Music or news |
Variety show | Music or news | News / Dialog | Music or news |
Notes:
- For better sound quality, please set the volume of the soundbar to 75 percent of the maximum ( Note: the maximum volume drop 3 levels is 75 percent) and set the volume of your source device to a suitable level.
- The sound mode selection and the volume settings are saved in the memory even after the sound bar is powered off, and the volume setting from 75 percent to maximum will be saved to 75 percent.
- Set the volume of your source device to a low level before switching on the soundbar.
- Then increase the volume of your source device to a comfortable level.
- Disconnect the power adapter from the electrical outlet to power off your sound bar completely.
Source | Function |
---|---|
OPT | Optical, connection with an optical fiber cable. |
COAX | Coaxial, connection with a coaxial cable. |
BT | Bluetooth, Connection to a Bluetooth Device. |
AUX
| Auxiliary, Connection with a RCA to RCA audio cable.
Auxiliary, Connection with a 1/8 inch(3.5mm) to RCA audio cable.
- Press the M(Mode)button repeatedly on the sound bar or press the OPT, COAX, BT, AUX button on the remote control to toggle between the sources, The OPT, COAX, BT, AUX source indicator will light up blue accordingly.
- You can boost/restore the volume by double-clicking the boost button on the remote control when you use an AUX source (audio cable connection).
- Basic functions >>> Playback functions
- Normally playback functions can be managed through the controls of the connected source device.
- Alternatively, use the remote control and the buttons of the soundbar.
Basic functions >>> Selecting a source
- You can have several source devices connected permanently to the soundbar.
- Available sources are: OPT / COAX / BT / AUX
Source | Function |
---|---|
OPT | Optical , connection with an optical fiber cable. |
COAX | Coaxial, connection with a coaxial cable. |
BT | Bluetooth, Connection to a Bluetooth Device. |
AUX
| Auxiliary, Connection with a RCA to RCA audio cable.
Auxiliary, Connection with a 1/8 inch(3.5mm) to RCA audio cable.
Basic functions >>> Playback functions
- Normally playback functions can be managed through the controls of the connected source device.
- Alternatively, use the remote control and the buttons of the soundbar.
Key | Press Key | Function |
---|
M
| 1 X| Source Selection
Long press 2 second| Disconnecting the Bluetooth device
I< / >I| 1 X| Skip to the beginning of the previous/next title
- / +| 1 X| Volume down / Volume up
II / mute
| 1 X| Pause / Mute sound (Flash the indicator light).
2 X| Play / Restore sound.
Notes:
- The volume boost and mode (source) selection is saved in the memory even after the sound bar is powered off.
- The audio output of the sound bar is affected by the settings of the connected source. If necessary, adjust the settings of the source to improve the audio output.
Bluetooth function
- External Bluetooth devices can be connected to the TV sound bar system via Bluetooth connection.
- Press the BT button on the remote control to enter the Bluetooth mode. The Bluetooth indicator lights up blue.
- Activate the Bluetooth function of the external device and search for Bluetooth devices.
- Select Sine Audio from the Bluetooth device list.
- Follow the instructions shown on your device’s screen.
- When the Bluetooth connection is established, files from your connected Bluetooth device will be played through the soundbar.
Disconnecting the Bluetooth device:
- Press M (Mode) button on the sound bar to enter AUX, OPT, or COAX mode.
- Press the OPT, COAX, or AUX button on the remote control to enter AUX, OPT, or COAX mode.
- Disconnect using your Bluetooth device. The sound bar starts searching for another Bluetooth device.
- Long press the BT button on the remote control or the M (Mode) button on the sound bar for about 2 seconds to disconnect the current Bluetooth device. Long press about 2 seconds again to reconnect the current Bluetooth device.
Notes:
- Bluetooth works best within a range of up to 33 feet (10 meters).
- The music streaming may be interrupted by obstacles between the Bluetooth device and the sound bar, such as walls, the metallic casing that covers the device, or other devices nearby that operate at the same frequency.
- If the connected device goes out of Bluetooth range, the system will reconnect automatically when the device comes back within range.
- The current Bluetooth device connection is saved in the memory even after the sound bar is powered off.
Troubleshootings
Problem | Solution |
---|---|
No power | Check the power adapter is properly connected to an electrical |
outlet. Check the DC plug is properly connected to the DC IN socket.
Unplug the power adapter for at least one minute and reconnect.
No Sound| Press the Power button on the sound bar or remote control to turn on the soundbar. The power indicator lights up green.
Increase your TV’s volume to maximum.
Press the MUTE button on the remote control to restore sound.
Ensure that the source device has the correct volume settings and is playing a track.
Ensure the correct source device is selected.
Plug the audio cable into a connector on your TV labeled Audio Output or Audio OUT, not Audio Input or Audio IN.
Optical and coaxial cable connection:
Plug the optical cable into a connector on your TV labeled Optical OUT or Digital OUT, Optical IN, or Digital IN.
Plug the coaxial cable into a connector on your TV labeled Coaxial OUT or Digital OUT, Coaxial IN, or Digital IN.
Activate PCM(Pulse Code Modulation)in the audio settings menu of your source device(see your source device’s user manual).
Audio cable connection (connect to the headphone socket of the TV):
Turn on your TV speakers, Refer to your TV’s user manual for more information.
Poor audio quality| Press the movie, music, or news button on the remote control to select a suitable sound mode.
Set the volume of the soundbar to 75 percent of the maximum(Note: the maximum volume drop at 3 levels is 75 percent).
Secure cable connections on the sound bar and TV (or other connected sources).
Try with different source devices. If the problem still exists, check the cable connections.
Ensure that the cables connected to the source devices are correctly
plugged in and the plugs are fully inserted.
Problem | Solution |
---|---|
Poor audio quality | Reduce the volume of your source device. Audio cable |
connection:
Double-clicking the boost button on the remote control to restore the volume.
Bluetooth connection:
Bring the Bluetooth device closer to the sound bar and make sure that no obstacles are disturbing the connection.
The remote control does not work| Ensure that the batteries are correctly inserted; if necessary, replace the batteries.
Bring the remote control closer to the sound bar and make sure there are no obstacles in between. Ensure the remote control is within 16.5 feet (5 meters) of the system.
Aim the remote control directly at the infrared receiver of the system.
The system doesn’t react| It is malfunctioning probably due to electrostatic discharge.
Unplug the power adapter for at least one minute and reconnect.
Bluetooth devices cannot be connected to the soundbar| Bring the Bluetooth device closer to the soundbar.
Switch off your device and/or sound bar, then back on, and repeat the pairing process.
Make sure the sound bar is not connected to another Bluetooth device.
Make sure that you have selected Sine Audio from the Bluetooth device list on your device.
Ensure you are using the correct device.
If the device is still not connected, try the following:
Remove the sound bar (Sine Audio) from the list of “paired devices” on your phone/tablet.
Turn the sound bar off and then on again.
Pair it again with your phone/tablet. It should now successfully establish the pairing.
Note: If none of the above solutions works, the Bluetooth device may be malfunctioning. Try another Bluetooth device. If not even the new device can be connected, the sound bar may be malfunctioning. In this case,
please consult your dealer for repair.
Care and Maintenances
Cleaning
Warning!
- Before cleaning, ensure to switch the system off and disconnect the power adapter from the electrical outlet.
- Do not use petrol, alcohol, or other abrasive cleansers to clean the exterior.
- Clean the surface of the system with a soft, dry cloth.
- Do not use any sprays near the system. Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
- Do not allow liquids to spill into any openings.
- Use the original packaging if it is necessary to transport the system
Warranty Information
The warranty period for this product is 12 months from the date of its
original purchase. If manufacturing defects occur, please contact your dealer
the first time, and we will instruct
you on how to return the defective unit back to us for repair or replacement.
The following are excluded from the Sine Audio warranty coverage:
- Product over warranty.
- Damage resulted from misuse and abusive action.
- Damage resulted from chemicals, fire, radioactive substances, and poison, liquid.
- Damage resulted from natural disasters.
FAQ’s
What is the model name of the 36-Inches Stereo TV Sound Bar System?
The model name of the 36-Inches Stereo TV Sound Bar System is Saiyin DS6403.
What is the length of the Saiyin DS6403 Sound Bar System?
The Saiyin DS6403 Sound Bar System has a length of 36 inches.
Does the Saiyin DS6403 Sound Bar System support stereo sound?
Yes, the Saiyin DS6403 Sound Bar System supports stereo sound.
Can the Saiyin DS6403 Sound Bar System be connected to a TV?
Yes, the Saiyin DS6403 Sound Bar System can be connected to a TV.
What type of connectivity options does the Saiyin DS6403 Sound Bar System offer?
The Saiyin DS6403 Sound Bar System offers various connectivity options, including HDMI, optical, and Bluetooth.
What is the power output of the Saiyin DS6403 Sound Bar System?
The power output of the Saiyin DS6403 Sound Bar System is typically mentioned in the product specifications and may vary. Please refer to the specific model's documentation for the accurate power output.
Does the Saiyin DS6403 Sound Bar System come with a remote control?
Yes, the Saiyin DS6403 Sound Bar System usually comes with a remote control for convenient operation.
Can the Saiyin DS6403 Sound Bar System be wall-mounted?
Yes, the Saiyin DS6403 Sound Bar System can be wall-mounted using the appropriate brackets or mounting hardware.
Does the Saiyin DS6403 Sound Bar System have built-in subwoofers?
The Saiyin DS6403 Sound Bar System may or may not have built-in subwoofers. It's best to refer to the product specifications or description for details about the specific model.
What is the warranty period for the Saiyin DS6403 Sound Bar System?
The warranty period for the Saiyin DS6403 Sound Bar System may vary. It is recommended to check with the manufacturer or retailer for the warranty details.
Can the Saiyin DS6403 Sound Bar System be used with devices other than a TV?
Yes, the Saiyin DS6403 Sound Bar System can be used with other devices such as smartphones, tablets, computers, and gaming consoles, depending on the available connectivity options.
Is the Saiyin DS6403 Sound Bar System compatible with virtual assistants like Alexa or Google Assistant?
The compatibility of the Saiyin DS6403 Sound Bar System with virtual assistants may vary. Some models might have built-in voice control features or support integration with virtual assistants, while others may not. Please refer to the product specifications or documentation for information regarding virtual assistant compatibility.