LANDMANN 00882, 00883 Smoker Instruction Manual

: June 12, 2024
: LANDMANN

Table of Contents

LANDMANN 00882, 00883 Smoker
ITEMS SUPPLIED
AND OPERATING INSTRUCTIONS
Symbols
NOTICES FOR ASSEMBLY
SETTING
CLEANING AND STORAGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LANDMANN 00882, 00883 Smoker

Product Information

Brand: LANDMANN
Model: FP-X-525 / FP-X-620
Assembly and operating instructions are available in multiple languages
Made in China

Product Usage Instructions:

Before starting the assembly, make sure you have a flat work surface measuring roughly two to three square meters and all the parts and tools required for assembly.
Follow the assembly instructions provided step by step to correctly assemble the fire pit.
After assembly, carefully read through the operating instructions and safety notices
Only use the fire pit for the specified purpose as described in the assembly and operating instructions.
Do not operate the fire pit if it is deformed or defective. Always check for any deformities or defects before each use.
Keep plastic bags and films away from young children and animals to avoid suffocation hazards.
After use, before emptying or cleaning the fire pit, cover it with a tarpaulin or a suitable cover.
Follow the cleaning instructions provided to properly clean the fire pit after each use.
Store the fire pit in a safe and dry place when not in use.
Keep the assembly and operating instructions for future reference and for other users.
Note:
Failure to comply with the information and instructions provided in the assembly and operating instructions may void any liability from the manufacturer and importer.

you require

ITEMS SUPPLIED

$LANDMANN-00882-00883-Smoker-fig- $2$$

Dear Customer,
Thank you for choosing a fire pit from LANDMANN. Please follow these assembly and operating instructions step by step to get the LANDMANN fire pit you have just purchased ready for use. In addition, we provide you with important notices about how to use and handle the product safely and how to look after it. Allow sufficient time to assemble it correctly. Before you start, clear a flat work surface measuring roughly two to three square meters, remove all parts from the packaging, and make sure the tools you require are within easy reach. If you have any questions about your fire pit or require further support, our service team will be happy to help. You will find the relevant contact details on the back of these assembly and operating instructions. Your LANDMANN team hopes you enjoy using it.

AND OPERATING INSTRUCTIONS

Before using the product for the first time, please read through these assembly and operating instructions carefully and follow the
safety notices. Keep them for future reference and for other users. They
form an integral part of the product. The manufacturer and importer
do not accept any liability if the information in these assembly
and operating instructions is not complied with.

Symbols

Danger symbols:
This symbol indicates possible dangers.
Read the associated safety
notices carefully and follow them.

Supplementary information
Read the assembly and operating instructions before use! Do not operate in closed and/or habitable spaces, e.g. buildings, tents, caravans, mobile homes, or boats. There is a danger to life due to carbon monoxide poisoning.

$LANDMANN-00882-00883-Smoker-fig- $4$$

INTENDED USE

This fire pit (referred to below as “product”) is a free-standing, movable fire for outdoor use and is intended for ready-to-burn natural firewood.
The product is not suitable for cooking other food.
The product is designed exclusively for personal and not for commercial use. Use the product only for the specified purpose and as described in these instructions for assembly and operation. Any other use is deemed to be improper.
The warranty does not cover faults caused by incorrect handling, damage or attempted repairs. The same applies to normal wear and tear.

NOTICES FOR ASSEMBLY

PLEASE NOTE!

Keep plastic bags and films away from young children and animals!
There is a danger of suffocation.
Check the items supplied for completeness and the components for transport damage. If any parts are missing or damaged, contact the customer service department (see last page).
Remove any films, stickers or transport protection from the product, but never the rating plate and possible warnings!
Ensure there is sufficient space to assemble the product and if necessary use a mat to protect the product or delicate floors from being scratched.
Assemble the product on a horizontal, flat surface to make sure it is straight.
Follow the assembly steps shown in these assembly and operating instructions.
Do not apply any force when assembling the product.
First, tighten the screw connections so they are hand-tight and then tighten them again properly once you have completed the assembly step. Otherwise, this may cause unwanted tension.
Tighten the nuts until they fit firmly, and then turn them a quarter turn more. Do not tighten them too hard!

PLEASE NOTE!

PLEASE NOTE: risk of carbon monoxide poisoning! Do not operate the product indoors, only outdoors!
Only use the product if it has been assembled properly in accordance with these assembly and operating instructions and is undamaged.
NOTICE: The product must not be used if it is deformed or defective. This must be checked before each use.
Before use, place the product on a safe, stable, horizontal, level and fireproof surface.
PLEASE NOTE! National and local regulations, such as permits, operation, safety distances and others, must be complied with.
Choose the location for setting up the product so that no combustible materials or substances are located nearby or can get to it. Never set up the product below branches! The minimum distance from combustible materials and surrounding surfaces
has to be 3 m.
PLEASE NOTE! Keep children and pets well away from the product! Never leave the product unattended when it is burning or still hot. In particular, make sure that no children or persons who are not capable of correctly recognizing or reacting to possible dangers come near the hot product.
PLEASE NOTE! Do not use any spirits or petrol for ignition or reignition! Only use firelighters that comply with EN 1860-3!
Only burn natural coniferous or deciduous wood that is ready for burning (no compressed wood products from these types of wood).
The product must not be used as a waste incinerator. No unsuitable or non-recommended fuels must be used. In addition, no liquid fuels must be used.
PLEASE NOTE! The product gets very hot and must not be moved while in use!
Do not use the product in strong wind.
Keep your distance during use. If the product has to be touched, e.g. when adding fuel, wear barbecue gloves (to prevent thermal risks) which conforms to DIN EN 407 (Category II). Also use the poker. Even when the fire has gone out, the surfaces will still remain hot for some time.
Do not overload the product and do not allow the fire to get too big. Add no more than 2.73 kg (00882) / 4.55 kg (00883) of firewood.
In the event of a fire: smother the flames with a suitable fireproof blanket or a fire extinguisher.
Using petrol or spirit to ignite the fuel may result in uncontrollable heat caused by deflagrations. You should only use safe materials for burning, such as solid firelighters.

SETTING

$LANDMANN-00882-00883-Smoker-fig- $4$$ $LANDMANN-00882-00883-Smoker-fig- $4$$

Hardwood, i.e. wood from deciduous trees such as beech, oak, or birch, is particularly suitable as firewood. Thanks to its high density, this wood gives a long and even heat.

Stack some of the wood in the product. Ignite one or two solid firelighters and place them in the product.
Allow the solid firelighters to burn for two to four minutes.
Carefully add more wood. Never throw wood into the fire!
Place the cover on or close the doors. Use the poker to do this.

CLEANING AND STORAGE

PLEASE NOTE!
Allow all parts to cool down completely before you clean the product, place a cover over it or store it away.

Never extinguish the fire with water to avoid burns and scalding.
Do not use corrosive or abrasive cleaning agents or brushes with metal bristles. They may damage the surfaces.
Do not fill with water or expose to rainfall for a prolonged period.
Once all parts have cooled down, dispose of the ash in an environmentally friendly way.
Clean the product with a suitable brush or with a wet sponge and some washing-up liquid. For stubborn dirt, you can use a standard household cleaner.
Allow all parts to dry completely or dry them before they are stored away.
Store them in a dry, weatherproof location.

DISPOSAL
Pay attention to cleanliness when handling the product and disposing of waste materials. As a general rule, you should only dispose of waste materials in designated metal or non-flammable containers. The local regulations on waste disposal apply.
To dispose of the product, dismantle it into its individual parts and recycle any metals and plastic. Dispose of the packaging material in an environmentally friendly manner so that it can be recycled.

LANDMANN Ltd.
Unit 6 Blackstone Road
Stukeley Meadows Huntingdon
PE29 6EF
United Kingdom
Tel: +44 14 80 42 17 20
E-Mail: sales@landmann.co.uk
Website: https://landmann.com/uk