LANDMANN TRITON 2.0 Gas BBQ Instruction Manual
- October 30, 2023
- LANDMANN
Table of Contents
LANDMANN TRITON 2.0 Gas BBQ
Product Information
The Triton 2.0 is a gas barbecue manufactured by Landmann Germany GmbH. It has a weight of 37.7 kg and dimensions of 124 x 121 x 57 cm. The appliance has a maximum heat output of 7.4 kW and a cooking area of 48 x 44 cm, with a warming rack included. The product comes with a number of parts such as side tables, cooking grills, grease tray, wheels, and a regulator & hose set.
Product Usage Instructions
- Place the gas cylinder next to the barbecue during use.
- To start the grill, turn the regulator knob anti-clockwise to the MAX position.
- Press and hold the ignition button while turning the control knob to the desired temperature setting.
- To turn off the grill, simply turn the regulator knob clockwise to the OFF position.
- After use, ensure that the gas cylinder does not exceed the specified maximum dimensions and store it in the recess provided for this purpose in the base cabinet.
Please refer to the parts list and assembly instructions to assemble the product correctly before usage.
OVERVIEW
Part list
Item | Qty. | Part name |
---|---|---|
1 | 1 | Side frame, left |
2 | 1 | Side frame, right |
3 | 1 | Cart base |
4 | 1 | Rear panel |
5 | 1 | Front panel strut, top |
6 | 1 | Grease catchment tray, right |
7 | 1 | Grease catchment tray, left |
8 | 4 | Rollers |
9 | 1 | Front panel strut, bottom |
10 | 1 | Barbecue unit, preassembled |
11 | 2 | Side rack bracket, front |
12 | 2 | Side table bracket, rear |
13 | 1 | Side table, left |
14 | 1 | Side table, right |
15 | 2 | Side table bar |
16 | 1 | Lower cupboard door |
17 | 1 | Door handle |
18 | 2 | Adjusting knob |
19 | 2 | Flame tamer |
20 | 2 | Cooking grill |
21 | 1 | Warming rack |
22 | 1 | Grease tray |
23 | 1 | Fat catcher tray |
24 | 1 | KIT (Regulator & Hose set) |
1 | Screw set with assembly material |
Placement of the gas cylinder during use
Position the gas cylinder next to the barbecue during use.
Placement of the gas cylinder after use
The gas cylinder can be stored in the base cabinet after use, provided that it
does not exceed the specified maximum dimensions (see page 3). Place the gas
cylinder in the recess provided for this purpose in the base.
Declaration of Conformity
We, LANDMANN Germany GmbH, hereby declare that the gas appliance described here complies with EU regulation 2016/426. Conformity has been verified by a type examination according to EN 498:2012. The type examination was carried out by the notified body DBI (2531). Product identification number: 2531CU-0061 Please contact our service department for further information.
Utilisation Functional elements (see page 3):
- A. Electronic ignition
- B. Main burner control knob
Starting up the barbecue
- Open the lid on the grill unit (1).
- Open the gas supply on the gas cylinder (see operating manual).
- Each burner has its own ignition system and they can therefore be ignited individually. Press the control knob and turn it anti-clockwise to the MAX position. Hold down the control knob (2).
- Press the electronic ignition button (3). You should hear a clicking sound.
- Check whether the burner has been ignited. Carefully look through the cooking grill to see if flames come out of the burner.
- If the burner has not ignited, press the control knob and turn it back to the 0 position. Wait for 5 minutes to allow the gas in the combustion chamber to dissipate. Then repeat the ignition process.
- If the burner has ignited, repeat the above steps for the remaining burners.
- WARNING! Open the cover during the ignition process.
- WARNING! Do not bend over the cooking area when igniting the burners.
- WARNING! Each burner must be ignited individually by pressing the electronic ignition.
- WARNING! If the burner has not ignited, press the control knob and turn it back to the 0 position. Wait for 5 minutes to allow the gas in the combustion chamber to dissipate. Then repeat the ignition process.
Switching off the barbecue:
- Close the gas supply on the gas cylinder (see operating manual).
- Press the control knob and turn it clockwise to the 0 position.
Replacing the electronic ignition battery
Turn the electronic ignition button anti-clockwise and insert or replace an AA
battery.
INSTALLATION INSTRUCTION
LANDMANN Ltd. Unit 6 Blackstone Road Stukeley Meadows Huntingdon PE29 6EF United Kingdom Tel: +44 14 80 42 17 20 E-Mail: sales@landmann.co.uk Website: https://landmann.com/uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>