MUHLER KSC-2027 Digital Kitchen Scale Instruction Manual
- June 12, 2024
- MUHLER
Table of Contents
MUHLER KSC-2027 Digital Kitchen Scale
For the purpose of using and maintaining the electronic scale, please read this instruction completely before operation.
SPECIFICATIONS
Equipped with high precision “stain-gauge” sensor and high capability CPU to ensure the weighing accuracy.
- Capacity:5KG
- Division: 1 g
- Unit: kg/g/lb/oz
- Low Battery / Overload Indication
- Tare function.
- Auto power off.
- Function Key: (UNIT, ON /OFF-TARE)
- Power: 1*3V CR 2032 battery
OPERATION
Take out the scale, open the battery cover on the back, put 1 pcs CR2032 battery in the battery case, then close the battery cover tightly. Put the scale on the flat table, and ensure it steady.
UNIT SELECTION
The device can display the weight of objects on the weighing plate – up to a maximum of 5kg (in imperial units up to 11 lbs.) – in four measuring units on the LCD display:
- in grams(gs) kilograms(kgs)
- in ounces(ozs) pounds(lbs)
- The measuring unit required can be set by the measuring unit selection button
WEIGHING STEP
Switch the appliance on by touching the ON/OFF button. The appliance will carry out a quick self-test; each part of the display is checked during this test.
When the self-test has finished and the display has returned to normal, place the item you’re weighing onto the glass surface. Make sure the item isn’t touching anything else, such as a nearby wall or other surface, because this will affect the measurement. The weight will be shown on the LCD display using the units you’ve selected previously.
If the item you’re weighing cannot be put directly onto the glass surface – perhaps because it’s a fine powder or a liquid – then you may use an appropriately – sized light bowl. The scales can automatically deduct the weight of this bowl (known as the “tare”), which avoids any need to weigh the bowl separately. To weight items in a bowl, switch on the scales and wait for the self-test. When the display shows zero, place the empty bowl on the glass weighing surface. The bowl’s weight will be displayed. Now touch the TARE button. This will automatically compensate for the weight of the bowl and will cause the display to show zero again. You can now weight solids or liquids that are placed in the bowl.
The device can also be used as a zero indicator because the LCD-screen can display negative values e.g. if you want to weight identical weights during a series of measurements or the difference from a reference gauge (excess or deficit of weight). This can be done by using taring measurement, In such cases taring must be performed after weighing a reference weight, which must then be removed and a set of reading compared to this first measurement.
The appliance will automatically switch itself off when you’ ye finished weighing. It can also be switched off by pressing the ON/ OFF button for a couple of seconds.
ERROR DISPLAY INTRODUCTION
When the scale is over loaded, “ 0-Id “ will appear on the display. When the screen shows “Lo”, it means that the power isn’t enough, please change the batteries as soon as possible.
ADVICE FOR USE AND CARE
Put the scale on a clean and flat table. The maximum weight of the scale is 5kg, which included the weight before tare. To ensure the life of the scale, do not put the scale under wet, hot & cold condition. The product belongs to high precision electronic weighing apparatus, please do not press or drop the scale otherwise the scale is easy to damage. If the scale surface is dirty, please clean the scale with soft cloth, do not use any chemical detergent and water to get inside the scale. The product is for family weighing only. If the result appears improperly, please check about whether the battery and the touch point contact well.
Replace for new battery if not used for a long time already, and then try again.
CUSTOMER SUPPORT
The symbol means that the product should not be disposed of with household waste in order to avoid environmental contamination and human injury. Take the appliance to a specialist recycling center for electrical appliances.
MANUFACTURER AND IMPORTER:
Keten LTD.; VAT: BG123670208; fl. 7, 39 Vladimir Vazov blvd., 1836,
Sofia, Bulgaria
Phone: +359 2 8691023; Fax: +359 2 8691025; e-mail:
sales@keten.bg; www.keten.bg
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>