8974589 Slayer Espresso Single Group Instruction Manual
- May 15, 2024
- SLAYER
Table of Contents
8974589 Slayer Espresso Single Group
Product Information
Specifications
- Dimensions (W x D x H): 23 in x 18.5 in x 14.75 in
- Power Requirements: 220V, 10A, single-phase
- Water Connection: 3/8-inch water line with shutoff valve
- Drain Requirements: Drain hose of 18.5 in
Product Usage Instructions
Installation
- Place the Slayer Espresso Single Group on a counter with dimensions of at least 23 in x 18.5 in.
- Make sure there are no overhanging components like portafilters.
- Connect the 3/8-inch water line to a water system with a shutoff valve.
- Provide a drain for the hose with a length of 18.5 in.
- Use a power source of 220V with a 10A single-phase connection.
Operation
- Plug in the Slayer Espresso Single Group to the power outlet.
- Fill the water reservoir if needed.
- Turn on the machine and allow it to heat up.
- Prepare your coffee grounds and load them into the portafilter.
- Lock the portafilter into place and start the brewing process.
- Once brewing is complete, enjoy your espresso!
FAQs (Frequently Asked Questions)
Q: What should I do if the machine is not heating up?
- A: Check that the power source is connected properly and that the machine is switched on. If the issue persists, contact customer support.
Q: How often should I clean the machine?
- A: It is recommended to clean the machine daily to ensure optimal performance and taste of your espresso.
Dimension
Counter
- Width: 18.5 in / 47 cm (foot-to-foot)Width: 22.2 in / 56.4 cm (incl. handles)
- Depth: 23 in / 58 cm (foot-to-drip tray)
- Height: 14.5 in / 38.8 cm (incl. handles)
- Weight: 110 lbs / 50 kg (tanks filled)Measurements do not include overhanging components: portafilters.
Water
- 3/8-inch BSP dedicated cold water line with shutoffvalve (in North America, 3/8-inch compression fitting is included)
- Required incoming water pressure:3 Bar min, 5 Bar max
- VWater hardness cannot exceed 50ppm, otherwise awater softener is needed
Power
- Single Phase: 120 volts, 50/60 hz, 12 a, 1.5 kW
- Standard grounded plug end included
- Receptacle: Nema 5-15 OR
- Single Phase: 220—240 volts, 50/60 hz, 9a, 2.1—2.4 kW
- Receptacle: Nema 6-15
Drain
- Open gravity drain located within 4 feet / 1.2 metersof the machine.
- Ensure drain line is always sloping downwards
- Drain hose: 7/8 inch outside diameter, 5/8 inchinside diameter (2.2 cm outside diameter, 1.6 cminside diameter).
- P +1 206 284 7171 F +1 206 284 7766
- 707 LIND AVE SW., RENTON, WA 98057
Documents / Resources
|
SLAYER 8974589 Slayer Espresso Single
Group
[pdf] Instruction Manual
8974589 Slayer Espresso Single Group, 8974589, Slayer Espresso Single Group,
Espresso Single Group, Single Group
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>