agv ER27 Insyde Speakers User Guide
- June 5, 2024
- agv
Table of Contents
**agv ER27 Insyde Speakers
**
introduction
Remove
- Remove the two covers applied on the helmet: using the specific tool )
- provided, release the two clips of the back unit. and detach it;
- release the clip of the headset and push it downwards.
- Remove the right-side cheek pad see the helmet user manual,
Install
- Install the back unit and thread its right side ca- bles under the helmet base trim (use the tool if necessary).
- Move the retention system (2) out be- fore threading the cables.
- Attach the cover with the hole for the charging slot ( supplied with Insyde.
Apply
- Apply the headset through the three hooking guides1
- and hook the plastic clip placed on the lower side )
- Then be sure to thread its cable underneath the helmet base trim
Connect
- Connect the microphone and the speakers ca bles.
- Then, on the right side of the helmet, in- stall the microphone in two movementS
Drive
Drive the microphone cable through its OWn slot on the speaker s housing.
speaker
- install both the speakers tn their housing using the adhesive strap supplied.
- To install the eft speaker, lift the cheek pad first, then atach it making sure that all its press studs are fixed (see the helmet user manualfor the cheek pad operations)
connector
- Insert the cables connectors O in the empty space between the outer shell and the polystyrene, On the right side. Insert the microphone cable first, then the speakers one.
Detach
- Detach the crown pad releasing its twO snap buttons , then thread the left speaker cable between the polystyrene and the crown pad,
- Then fix the crown pad, taking care not to damage the cables
Features
radio
- “Hey Cardo, radio on
- Hey Cardo, radio off
- “Hey Cardo, next station”
- Hey Cardo, previous station
music
- Hey Cardo, music on”
- “Hey Cardo, radio off”
- “Hey Cardo, next track”
- “Hey Cardo, previous track”
volume
- Hey Cardo, volume up”
- “Hey Cardo, volume down”
- “Hey Cardo, mute audio
- Hey Cardo, unmute audio
speed dial
- “Hey Cardo, speed dial”
- “Hey Cardo, redial number”
- Answer
- ignore
battery status
- “Hey Cardo, battery status”
- Hey Cardo, call intercom”
Siri
- “Hey Siri”
- “Hey Google”
**overview
**
**volume
**
**how to use
**
**wifi
**
Bluetooth
**
**
**on and of
**
TYPE APPROVAL
__
P/N
| __
MAN00514
__
DESCRIPTION
| __
POCKET GUIDE
__
FILE NAME
| __
MAN00514 MANUAL INSTALLATION GUIDE AGV – ENGLISH_A01
__
LANGUAGE
| __
Multi Lang
__
PRODUCT TYPE
| __
MANUAL
__
MATERIAL
| __
P2 C4+4
80gr offset folded
__
PRINTING PROCESS
| __
COLOR: CMYK
__
SECONDARY PROCESS
| GLOSSY FINISH
__
ATTACHED FILES
| 1. GRAPHIC FILE – PDF
2. Attached video for folding explanation
__
MEASUREMENT
| __
SPREAD: 360MM-540MM , FOLDED: 180MM-90MM
__
CLIENTS/ DISTRIBUTOR
|
__
SPECIAL REQUIREMENT
| agv ER27 Insyde Speakers
introduction
Remove
- Remove the two covers applied on the helmet: using the specific tool )
- provided, release the two clips of the back unit. and detach it;
- release the clip of the headset and push it downwards.
- Remove the right-side cheek pad see the helmet user manual,
Install
- Install the back unit and thread its right side ca- bles under the helmet base trim (use the tool if necessary).
- Move the retention system (2) out be- fore threading the cables.
- Attach the cover with the hole for the charging slot ( supplied with Insyde.
Apply
- Apply the headset through the three hooking guides1
- and hook the plastic clip placed on the lower side )
- Then be sure to thread its cable underneath the helmet base trim
Connect
- Connect the microphone and the speakers ca bles.
- Then, on the right side of the helmet, in- stall the microphone in two movementS
Drive
Drive the microphone cable through its OWn slot on the speaker s housing.
speaker
- install both the speakers tn their housing using the adhesive strap supplied.
- To install the eft speaker, lift the cheek pad first, then atach it making sure that all its press studs are fixed (see the helmet user manualfor the cheek pad operations)
connector
- Insert the cables connectors O in the empty space between the outer shell and the polystyrene, On the right side. Insert the microphone cable first, then the speakers one.
Detach
- Detach the crown pad releasing its twO snap buttons , then thread the left speaker cable between the polystyrene and the crown pad,
- Then fix the crown pad, taking care not to damage the cables
features
radio
- “Hey Cardo, radio on
- Hey Cardo, radio off
- “Hey Cardo, next station”
- Hey Cardo, previous station
music
- Hey Cardo, music on”
- “Hey Cardo, radio off”
- “Hey Cardo, next track”
- “Hey Cardo, previous track”
volume
- Hey Cardo, volume up”
- “Hey Cardo, volume down”
- “Hey Cardo, mute audio
- Hey Cardo, unmute audio
speed dial
- “Hey Cardo, speed dial”
- “Hey Cardo, redial number”
- Answer
- ignore
battery status
- “Hey Cardo, battery status”
- Hey Cardo, call intercom”
Siri
- “Hey Siri”
- “Hey Google”
overview
volume
Bluetooth
| TYPE APPROVAL
__
P/N
| __
MAN00514
__
DESCRIPTION
| __
POCKET GUIDE
__
FILE NAME
| __
MAN00514 MANUAL INSTALLATION GUIDE AGV – ENGLISH_A01
__
LANGUAGE
| __
Multi Lang
__
PRODUCT TYPE
| __
MANUAL
__
MATERIAL
| __
P2 C4+4
80gr offset folded
__
PRINTING PROCESS
| __
COLOR: CMYK
__
SECONDARY PROCESS
| GLOSSY FINISH
__
ATTACHED FILES
| 1. GRAPHIC FILE – PDF
2. Attached video for folding explanation
__
MEASUREMENT
| __
SPREAD: 360MM-540MM , FOLDED: 180MM-90MM
__
CLIENTS/ DISTRIBUTOR
|
__
SPECIAL REQUIREMENT
|
REVISION| DESCRIPTION| DATE| NAME
__
A01
| __
FINAL- first version
| __
11.08.2020
| __
DANNA
REVISION| DESCRIPTION| DATE| NAME
__
A01
| __
FINAL- first version
| __
11.08.2020
| __
DANNA
References
- AGV: Full-face, modular and open-face motorcycle helmets since 1947
- Cardo Systems - The World's Best Powersports Communication System
- Cardo Systems Support Center
- Download cardo updater - Cardo Systems
- AGV: Full-face, modular and open-face motorcycle helmets since 1947
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>