DOMUS VERSA-300-ELID Round Eyelid LED Bunker Light Installation Guide

DOMUS VERSA-300-ELID Round Eyelid LED Bunker Light

Product Information

The VERSA-300-ELID is an LED Bunker Light with a TRIO Eyelid design. It is available in two variants:

1. Item No. 19804 – VERSA-300-ELID-BLK: 15/18/25W Bunker Light with a Black Finish
2. Item No. 19806 – VERSA-300-ELID-WHT: 15/18/25W Bunker Light with a Satin White Finish

Here are the specifications of the VERSA-300-ELID:

• Lumen Output:
  • 15W – Warm White 3000K: 1250lm
  • 18W – Neutral White 4000K: 850lm
  • 25W – Neutral White 4000K: 990lm
  • 25W – Neutral White 4000K: 1320lm
  • 15W – White 5700K: 880lm
  • 18W – White 5700K: 1050lm
  • 25W – White 5700K: 1400lm
• Voltage: 240V
• Power: 15W – 18W – 25W
• CCT (Correlated Color Temperature): Switchable between 3000K, 4000K, and 5700K
• Power Factor: 0.9
• IP Rating: IP65 (Waterproof)
• Lifespan: 50,000 hours
• IK Rating: IK08 (Impact resistance)
• CRI (Color Rendering Index): 80
• Dimmable: No

Product Usage Instructions

1. Take out the light and accessory pack from the box.
2. Unscrew the front frame anticlockwise to separate the frame, diffuser, and back.
3. Disconnect the connection plug and fix the base plate.
4. Connect the wires to the block through the reliefs.
5. Set the connectors well and insert the diffuser cover on the back housing. Insert screws to secure.
6. If using Type B cover, make sure the center line is on the connecting line of two knockouts.
7. For concealed wiring, install the front cover (Type A). For opening wiring, install the front cover (Type B).

Important Notes:

• The lamp must be installed by a professional electrician.
• Ensure the power supply is switched off before fitting this product.
• Do not touch the lamp when in use.
• Keep away from hot steam and corrosive gas.

VERSA-300-ELID

Eyelid, Black Finish
19806| VERSA-300-ELID- WHT| 15/18/25W Bunker Light, TRIO. Eyelid, Satin White Finish

Thank you for purchasing your new LED VERSA-300-ELID, Please take the time to read and understand the instruction sheet below. Failure to do so may void warranty.

Specifications

Lumen (±5%):| 15W

Warm White 3000K – 830lm Neutral White 4000K – 850lm

White 5700K – 880lm

| 18W

Warm White 3000K – 940lm Neutral White 4000K – 990lm

White 5700K – 1050lm

| 25W

Warm White 3000K – 1250lm Neutral White 4000K – 1320lm

White 5700K – 1400lm

---|---|---|---
Voltage:| 240V| Beam Angle:| 110°| Operating Temp:| -20°C~45°C
Power:| 15W – 18W – 25W

(Switchable)

| CCT:| 3000K – 4000K – 5700K

(Switchable)

| Power Factor:| 0.9
IP Rating:| IP65| Lifespan:| 50,000hrs| IK Rating:| IK08
CRI:| ≥80| Dimmable:| No|  |

Installation

1. Take out light and accessory pack from box

2. Unscrew the front frame anticlockwise, to separate the frame, diffuser and back.

3. Disconnect the connection plug, fix the base plate

4. Connect the wires to the block through the reliefs

5. Set the connectors well and insert the diffuser cover on the back housing. Insert screws.

6. Match the cover with plate
   (If the Type B cover, make sure the center line is on the connecting line of two knock out)

7. Installation of concealed wiring.
   Installation of opening wiring.Installation of opening wiring.

Note:

• The lamp must be installed by a professional electrician
• Ensure the power supply is switched off before fitting this product
• Do not touch the lamp when in use
• Keep away from hot steam and corrosive gas

29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia.
Phone: 02 9554 9600 | Fax: 02 9554 9433
enquiries@domuslighting.com | www.domuslighting.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>