DOMUS Dusk MR16 LED Garden Spike Light Instruction Manual

: June 1, 2024
: DOMUS

Table of Contents

DOMUS Dusk MR16 LED Garden Spike Light
Product Information
Product Usage Instructions
FAQs
Specifications
Save These Instructions
Fixture Mounting Instructions
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DOMUS Dusk MR16 LED Garden Spike Light

Product Information

Specifications:
- Voltage: 12V DC
- Power: 6W
- IP Rating: IP65
- CRI: 80
- Requires: 12V DC Constant Voltage LED Driver (Wire in Parallel)
- Beam Angle: Not specified
- CCT (Correlated Color Temperature): Warm White 3000K – 500lm, Neutral White 4000K – 550lm, White 6500K – 550lm
- Lifespan: 50,000hrs

Product Usage Instructions

Lamp Installation/Replacement Instructions:
- Ensure the power supply is switched off before installing or replacing the lamp.
- The lamp must be installed by a professional electrician for safety.
- Avoid touching the lamp when it is in use to prevent burns.
- Keep the lamp away from hot steam and corrosive gases to maintain its functionality.
Fixture Mounting Instructions:
- Ensure the power supply is switched off before mounting the fixture.
- The fixture must be mounted by a professional electrician for safety.
- Avoid touching the fixture during operation to prevent burns.
- Keep the fixture away from hot steam and corrosive gases to prevent damage.

FAQs

Q: Can I install the DUSK SPIKE MR16 lamp myself?
- A: It is recommended to have the lamp installed by a professional electrician to ensure proper installation and safety.
Q: What should I do if the lamp stops working?
- A: If the lamp stops working, first check the power supply and connections. If the issue persists, contact a professional for further assistance.
Q: Can the DUSK SPIKE MR16 be used in wet outdoor environments?
- A: Yes, the IP65 rating of the DUSK SPIKE MR16 makes it suitable for outdoor use and protection against water jets.

Specifications

Voltage:| 12V DC| Lumen (±5%):| Warm White 3000K – 500lm Neutral White 4000K – 550lm White 6500K – 550lm
---|---|---|---
Power:| 6W| Beam Angle:| 60°
IP Rating:| IP65| CCT:| 3000K-4000K-6500K
CRI:| ≥80| Lifespan:| 50,000hrs
Requires:| 12V DC Constant Voltage LED Driver (Wire in Parallel)

Save These Instructions

Warning – To reduce the risk of fire or injury to persons:

Turn the power off or unplug the luminaire and allow it to cool before replacing the lamp.
The lamp gets hot quickly. Contact only switch/plug when turning on.
Do not touch the hot lens, guard or luminaire housing until it has cooled
Keep Lamp away from combustibles.
Do not touch the lamp. Use a soft cloth. Oil from the skin may damage the lamp.
Do not operate the luminaire fitting with a missing or damaged shield.

Important Safety Instructions

For outdoor use only
- Make sure the power is turned off before installing or servicing the luminaire.
- WARNING: Risk of electrical shock. Install all luminaires 3.05m or more from a pool, spa or fountain.
- Position the wire and wire connector so that it is connected within 15.2 cm from a building or structure, a luminaire or fitting.
- Not to be buried except for a maximum of 15.2cm to connect to the main low voltage cable.

Lamp Installation/Replacement Instructions

Unscrew the shroud from the fixture housing.
Insert the MR16 LED lamp with the correct wattage as marked on the fixture label.
Replace the shroud and twist the shroud in place.

DOMUS-Dusk-MR16-LED-Garden-Spike-Light-FIG-1

Fixture Mounting Instructions

Disconnect the transformer from the main power supply.
Remove the shroud from the fixture housing
Insert MR16 LED Lamp (10W max) into the lamp socket.
Replace shroud and secure with twisting motion
Run lead wire from the fixture through the ground stake mounting hole.
Insert composite ground stake in the desired location until the flange of stake is flush to grade.
Screw the fixture into the top of the stake and tighten until snug.
Strip the two fixture lead wires and connect them to the main low-voltage supply cable lead with silicone-filled wire connectors.