DIGI 215873960 Wireless Landline Phone User Guide

: June 12, 2024
: DIGI

Table of Contents

BEFORE 1st USE
select SHORT / MEDIUM or LONG
DISPLAY ICONS
GENERAL SETTINGS
USING THE PHONE
PHONEBOOK AND D IRECT MEMOR IE S SETT ING S
TROUBLESHOOTING
SAFETY
ENVIRONMENT
CONFORMITY
CUSTOMER SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DIGI 215873960 Wireless Landline Phone User Guide

BEFORE 1st USE

Connecting your phone:

Connect plugs in corresponding sockets in the base station. Plug the telephone line into telephone socket and insert power plug in an electrical outlet.
Insert batteries in handset and place it on the cradle to start charging.

Before you start to use your telephone, charge batteries continuously for 15 hours.

Use only plug adapter and rechargeable batteries supplied with your phone.

After first time power up (base unit is connected to AC mains).

For example, to change language or flashtime:

/ or select HSSETTINGS / or select
LANGUAGE / or select your desired language / / or
/ or select BS SETTINGS / or select FLASH TIME / or select SHORT / MEDIUM or LONG

select SHORT / MEDIUM or LONG

MENU/ΟΚ key
Back/Correction/Intercom key
Navigation key/Call log access/Volume level increase
Navigation key/Volume level decrease
Talk key
Hang-up/Exit key
Recall (Flash) key – To access to operator services*
Phonebook key
Redial list access
Paging key – To locate handset (short press) / to start registration procedure.

DISPLAY ICONS

Battery level indicator (full , mid , empty ).
Indicates that phone is on line or held. Icon blinks when receiving an incoming call.
Indicates you have new missed calls*.
Displays when the alarm clock is activated
Displays when ringer volume is turned of.
Indicates that the handset is registered and within range of the base station
Icon blinks when the handset is out of range or is searching for a base.

GENERAL SETTINGS

This phone can be customized according to your preferences, to access the different possibilities press:

To customize handset (Alarm, Ring setup,… Language,… Date & Time): or select HS SETTINGS
To change Pin code, Flash time: or select BS SETTINGS

To register a handset (if needed):

On main base, press and hold for 10s the paging key (number ).
On the handset to be registered: press / select REGISTRATION / press / enter PIN code (default 0000) / press , handset is paired in few seconds.

USING THE PHONE

Receive and end a call

Make a call

either before or after dialing your number
From redial list: Press / or /
From call log list*: Press / or /
From direct memories: press and hold on or or ****in idle mode.
rom phonebook / or /

To make an internal call

If only 2 registered handsets: ****
more than 2 registered handsets: or / select the handset number
To ring all handsets to intercom: or / select CALL ALL

*To make a three-party conference call (with one external, two internals):**

During call:

Press select INTERCOM or / select the handset number
Press on the called handset to answer
Press and hold for 2 seconds ****on the calling handset to establish conference call.

Subject to subscription and availability of the service from the fixed line operator.

PHONEBOOK AND D IRECT MEMOR IE S SETT ING S

To register in phonebook (50 entries)

PHONEBOOK / ADD /enter name of contact enter number of contac t Press to save as VIP or to save as CONTACT, select a melody and validate with .

To register the direct memories in keys 1, 2, & 3 / or select HS SETTINGS / or select DIRECT MEM / or select one key (Key 1, Key 2, Key 3) / enter the number

Notes:

! appears in the end of name of VIP entry in the phonebook.
Phonebook is shared with duo, trio handsets.

TROUBLESHOOTING

As a general rule, if a problem occurs, remove the batteries from all handsets for about 1 minute, then disconnect and reconnect the power supply to the base and reinstall the handset batteries. This telephone is not designed for Emergency calls when the Mains power fails.

SAFETY

Do not use your telephone to notify a gas leak or other potential explosion hazard.Do not open your device or its power supply to avoid risk of electrical shock. Do not attempt to open the batteries, as they contain hazardous chemical substances. Your telephone must be located in a dry place away from hot, humide and direct sunlight condition. To avoid radio signal interference, place the phone at least 1 meter away from other electrical appliances or other phones.

ENVIRONMENT

This symbol means that your inoperative electronic appliance must be collected separately and not mixed with the household waste. The European Union has implemented a specific collection and recycling system for which producers are responsible.
Help us protect the environment in which we live!

CONFORMITY

Hereby, DIGI declares that the radio equipment type DECT is in compliance with Directive 2014/53/EU

Average power per channel: 10mW
Maximum Output Power (NTP) : 24dBm
Frequency Range : 1880-1900MHz

CUSTOMER SERVICE

You can contact our Customer Service by calling 1200 (free from DIGI subscriber numbers) or 642 642 642 (from other networks). Alternatively you can send an email to atencionalcliente@digimobil.es You can also reach us through our social networks,

digimobil.es ,
digimobil_es
@digimobil_e