V I V O DESK-V000KL 38 Inch Corner Desk Riser Instruction Manual
- June 12, 2024
- V I V O
Table of Contents
V I V O DESK-V000KL 38 Inch Corner Desk Riser
Product Information
Product Name | 38 Corner Desk Riser |
---|---|
SKU | DESK-V000KL/LA/LN/LW |
Manufacturer | VIVO |
Website | https://vivo-us.com/products/desk-v000kl |
Contact Information | Phone: |
309-278-5303
Email: help@vivo-us.com
Website: https://vivo-us.com
Product Usage Instructions
-
Apply Pads (D) to the underside of the Keyboard Tray (B).
-
Install Stopper (F) to the underside of the Keyboard Tray (B) using ST4.2x12mm Screws (S-B) and a Phillips screwdriver.
-
Press Foot Pads (E) into the holes in the base of the Desk (A).
-
Cut the large plastic ties on the bottom of the Desk (A).
CAUTION: Do not squeeze the release handle with the desk in a sideways or upside-down position. -
Place Desk (A) right-side up on a table. Raise the desk by squeezing the handle underneath the desktop.
-
Place Keyboard Tray (B) on the metal brackets on Desk (A). Secure the keyboard tray to the brackets using M5x10mm Screws (S-A) and a Phillips screwdriver.
-
Apply Cable Clips (C) to the underside of the desk assembly.
-
Place the monitor and accessories on the desk assembly to begin using.
Grommet Installation:
If installing a grommet-compatible monitor mount, remove the plastic cap from the rear center of the desktop. Install the mount to the open hole according to the mount’s directions.
Important Usage Guidelines
- Keep the monitor and laptop base fully on the desktop.
- Follow the cable routing instructions to avoid potential cable pinching.
- Leave enough slack in the cable to allow for a full range of vertical motion (15 / 38 cm).
- Raise the desktop slowly to keep items stable.
Please contact our dedicated support team at 309-278-5303 or email help@vivo- us.com if you have any questions or require assistance. We are available Monday to Friday from 7:00 am-7:00pm CST.
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1
Apply Pads (D) to underside of Keyboard Tray (B).
STEP 2
Install Stopper (F) to the underside of Keyboard Tray (B) using ST4.2x12mm Screws (S-B) and a Phillips screwdriver.
STEP 3
Press Foot Pads (E) into holes in the base of Desk (A).
STEP 4
Cut the large plastic ties on bottom of Desk (A). CAUTION: Do not squeeze the release handle with the desk in a sideways or upside-down position.
STEP 5
Place Desk (A) right-side up on a table. Raise the desk by squeezing the handle underneath the desktop.
STEP 6
Place Keyboard Tray (B) on metal brackets on Desk (A). Secure keyboard tray to brackets using M5x10mm Screws (S-A) and a Phillips screwdriver.
STEP 7
Apply Cable Clips (C) to underside of desk assembly.
STEP 8
Place monitor and accessories on desk assembly to begin using.
Grommet Installation
If installing a grommet-compatible monitor mount, remove the plastic cap from the rear center of the desktop. Install the mount to the open hole according to the mount’s directions.
CAUTION!
-
Keep the monitor and laptop base fully on the desktop.
-
Follow the cable routing instructions to avoid the potential to pinch cables.
-
Leave enough slack in the cable to allow for a full range of vertical motion (15” / 38 cm).
-
Raise the desktop slowly to keep items stable.
-
Failure to follow these instructions may result in property damage and/or personal injury.
-
Open Monday – Friday 7:00 am – 7:00 pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product
-
309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
-
www.vivo-us.com AVG. RESOLUTION TIME (within office hrs): < 15 M Chat live with an agent!
-
help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M
-
23% within < 15m
-
38% within < 30m
-
61% within < 1hr
-
83% within < 2hr
-
92% within < 3hr
-
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
-
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
Documents / Resources
| V I
V O DESK-V000KL 38 Inch Corner Desk
Riser
[pdf] Instruction Manual
DESK-V000KL, DESK-V000LA, DESK-V000LN, DESK-V000LW, DESK-V000KL 38 Inch Corner
Desk Riser, 38 Inch Corner Desk Riser, Corner Desk Riser, Desk Riser, Riser
---|---
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- 38" Corner Standing Desk Converter – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>