anko 43158775 10 Person Cabin Tent Instruction Manual

anko 43158775 10 Person Cabin Tent

Please keep this instruction manual for future reference

IMPORTANT
Please read instructions carefully. Familiarise yourself with the product before use. Keep these instruction for future reference.

Welcome
Congratulations on choosing to buy a Anko product. All products brought to you by Anko are manufactured to the highest standards of performance and safety and as part of our philosophy of customer service and satisfaction,are backed by our comprehensive 1 year warranty. We hope that you will enjoy using your purchase for many years to come.

Warnings

IMPORTANT SAFETY AND TIP INFORMATION
TO MAXIMIZE THE ENJOYMENT OF YOUR PRODUCT PLEASE ASSEMBLE AND USE YOUR PRODUCT AS SAFELY AS POSSIBLE. THE PURPOSE OF THE SAFETY ALERT SYMBOL IS TO CALL YOUR ATTENTION TO POSSIBLE HAZARDS RELATING TO THE USE AND ASSEMBLY OF YOUR PRODUCT. THE PURPOSE OF THE TIP SYMBOL IS TO CALL YOUR ATTENTION TO SUGGESTIONS THAT WILL ASSIST YOU IN THE ASSEMBLY/DISASSEMBLY PROCESS AND ENHANCE YOUR CAMPING EXPERIENCE. WHEN YOU SEE THESE SYMBOLS, PLEASE CLOSELY FOLLOW THE INFORMATION PROVIDED.

WARNING

• KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This fabric is not fireproof!The fabric may burn if left in continuous contact with any flame source.
• Do not erect this product near an open flame.
• Never use any fuel-burning, oxygen-consuming devices, or any device that produces fumes (including, but not limited to cooking stoves, lanterns, candles, hibachis, or heaters) in or around your product. Inhalation of fumes may result in carbon monoxide poisoning, injury and/or death.
• Your product is water-repellent, however, during heavy rain some leakage may occur. Keep objects from touching the inside, as objects may cause leakage at the point of contact.
• To prevent seam leakage (floor seams in particular), a seam sealer compound must be applied to the seams. Use recommended water-repellent compounds on our product. Read the label on any product before using. Questions? Call our Customer Service number.
• Your recreational product is made from synthetic fabric that has been treated and is highly resistant to the sun’s Ultraviolet (UV) light. No fabric can withstand prolonged exposure to sunlight. UV damage is not covered by the limited warranty.
• Do not spray or apply insecticide or pesticide on your product. It may damage UV resistant and/or water-repellent properties of our product. Any damage caused by applying insecticide or pesticide on your product is not covered by the limited warranty.
• Our recreational products are constructed to rigid specifications. They are not made, however, for extreme weather, climates, or environments. Modification, abuse and extreme weather are some conditions that may adversely affect the structural integrity.
• Additional precautions may be necessary during inclement or “surprise” weather conditions. Here are some tips that may help during these times.
  • Use guy lines to help secure your structure during periods of heavy winds.
  • Storms or steady rains may collect in water pockets on the roof. This will add weight, which can weaken the overall structure causing the uprights to collapse. Maintain a watchful eye and remove any water accumulation that may occur.

Parts List

Assembly Instructions

Verify Parts
Refer to the parts list and verify all the parts are included and undamaged.

Assemble poles
Take out the fiberglass poles from bag. Assemble the poles by each section joined together with ferrule.

Assemble inner tent
On a level surface, unfold the tent so all the corners are visible. Insert all poles through the corresponding color coded poles sleeve on tent inner. Fix the C poles into the 2 way hub in center. Set up the tent with pic insert into the pole end ferrel.

• Secure the inner tent with peg through the ring on the pin&ring into the ground.
• Cover the flysheet on the inner tent, fix with buckle and pegs through the elastic cord ring at the bottom of corners.
• Release the guy ropes pre-attached on flysheet, secure the guy ropes to make tent stay more stable. Front door can be set up by steel poles to create awning.

Disassembly Instructions

• Release the buckle on the floor corner and take off the flysheet from the inner tent.
• Retreat the steel pole from pin&ring and hubs.
• Draw out the fiberglass pole from pole sleeve. Then pack back all poles and tent body into bags.

TROUBLESHOOTING GUIDE

PLEASE NOTE: BEFORE RETURNING THIS UNIT TO THE STORE, PLEASE CONTACT THE NUMBER ABOVE FOR REPLACEMENT PARTS.

Care and Maintenance

• Your product must be stored dry. One of the easiest ways to damage your product is by storing it while it is wet. Storing a wet tent as short a 24 hours in warm weather is likely to cause mildew on the fabric coatings and are not covered by the limited warranty.
• If you must close camp in the rain, open your product and set it up to allow it to dry as soon as possible. Even when your product appears to be dry after use, it is always best to unfold and assure it is completely dry before storing. Hanging it outside or even leaving loosely clumped in your house for a few days. Turning it inside and out to assure it had dried everywhere, can help prevent damage.
• Do not leave your product set up for weeks at a time. Exposure to ultraviolet rays from the sun can damage and/or discolor the material.
• Clean the product, when it is set up, using a mild soap and lukewarm water solution. Rinse and dry completely. Do not use detergent, washing machines, or dryers because they can damage the tent/shelter’s protective coating and seams.
• Clean the poles with a cloth and lubricate them with a silicone spray to help prevent corrosion and keep them from being gritty. This is especially important after using the product around the salt water.
• Store the stakes in a separate storage bag. Do not pack the stakes inside the product body.

(Made In China)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>