nexvoo Breeze Face Mask User Manual
- June 5, 2024
- nexvoo
Table of Contents
Breeze Starter
User Manual
Please carefully read the instructions to use this product properly and safely.
Version V1.0
Important Notice
This manual and the information contained herein are provided for use as a maintenance and operation guide. No license or rights to manufacture, produce, and/or sell either the manual or articles described herein are given. Nexvoo Inc reserves the right to change the design and specifications for improvement purposes without any notice. We recommend that all users read and fully understand this manual before using the Breeze Starter.
All statements, technical information, and recommendations herein are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed; and the following is made in lieu of all warranties, expressed or implied, including the implied warranties of merchantability and fitness for purpose: Seller’s and Manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, the user shall determine the suitability of the product for intended use, and the user assumes all risk and liability whatsoever in connection therewith. Neither Seller nor Manufacturer shall be liable either in tort or in contract for any loss or damage — direct, incidental, or consequential — arising from the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect unless it is in an agreement signed by officers of the Seller and Manufacturer.
Intended use
Breeze Starter has deep cleaning effect with 5-layer N99 filters which can improve filtration efficiency. And it has 2 UV-C LED lights witch can kill the bacterial and virus on the filters.
Product Overview
1. Components
- Strap adjustment buckle
- Silicone band
- Outer cover of the filter
- Filter
- External clamp
- USB port
- UV-C LED light
- Internal clamp
- Silicone gel pad
2. Dimension
Before Use
1. Clean the mask
Clean the mask before use. The cleaning should be done using 70% isopropyl alcohol wipes or cloth dipped in 70% alcohol. Clean the outer surface by swabbing or wiping the surface with the alcohol wipes.
Caution
- Do not use any other cleaning materials or chemicals.
- Do not use a brush to clean, as it might scratch it.
2. UV Disinfection
This mask has the UV-C LED lights on both modules. When you use the USB cable to connect the device to an electric power supply, the UV-C LED will automatically turn on for a period of time to disinfect the filter.
Caution
When you unplug the USB cable, please cover the USB port with silicone cover to prevent air leakage.
3. Pre-test on skin
When using the product for the first time, always test first for compatibility with your skin.
Warning
Make sure to perform a pre-test in order to prevent skin problems from occurring.
- If a rash, reddening, itch, stinging sensation, or other abnormality occurs at the pre-testing site, please immediately stop the pre-test.
- Do not use the product if a skin abnormality is perceived.
How to Use
1. Wear the mask
(1) Hold the mask in hand, place it upwards, and let the silicone bands hang
downwards below hand.
(2) Adjust the mask to positions of your nose, cheeks and chin. Pull the lower
silicone band to the back of neck, below the ears and then pull the upper
silicone band to the top back of your head . You can use the strap adjustment
buckles to adhere the mask to the face.
(3) Face fit check should be done. If leakage is detected in the rest of mask
edge, adjust the silicone bands again.
Note
The device has a distance sensing function. If the device is far away from your face when wearing, the fan may not turn on automatically, you can also short press the switch button to turn it on.
2. Replace the filter
(1) Find the buckle of the filter cover which is near the USB charging port.
Pull out the filter cover by hand, and then the filter cover will
automatically pop.
(2) Remove the old filter, and take the new filter and insert it properly.
(3) Put the filter cover until it clicks.
Note
The filter is recommended to be replaced every 1~2 days.
Technical Specifications
Product Name | Breeze Starter |
---|---|
Product Type | NM201 |
Suitable for | Adults |
Product Size | 7.28’’L x 4.13’’W x 4.21’’ H |
185L x 105W x 107H mm
Weight| 95 grams / 0.21 lbs
Rated Voltage| DC 5V
Filter Level| N99
Filter Shelf Life| 2 years
Recommended Ambient Temperature| 10℃~40℃
Application| Non-medical
Personal protection
Accessories| Charging USB cable (Micro-USB)1
Filter Package1
User manual*1
Maintenance and Inspection
- If you have not used the device for an extended period, inspect it carefully and check that the device works properly and safely before use.
- If the device malfunctions or appears damaged, please contact your local distributor.
Caution
In the following cases, the guarantee is not provided:
- Unauthorized repair, misuse: strikes, negligence, wrong use, damage, alteration, misuse parts.
- Excess warranty.
- Force majeure, which resulted in damage to the product.
Storage
- Store in a clean and dry, well-ventilated place out of the reach of children.
- Remove the USB cable from the USB port when not in use for a long time and store them safely.
- Do not leave in hot or humid places, such as near flame, in bright sunlight, or in a bathroom.
Troubleshooting tips
Please visit www.nexvoo.com for troubleshooting tips and access the diagnostic tool to help troubleshoot any issues you may have with your Breeze Starter.
Disposal
Follow your local government rules for proper disposal of this product.
Nexvoo Inc.
Add: 1702 W Michigan St Indianapolis, IN 46222
Email:support@nexvoo.com
Web:www.nexvoo.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>