XIEGU X6100 HF/50 MHz Portable SDR Transceiver Instructions
- June 5, 2024
- XIEGU
Table of Contents
XIEGU X6100 HF/50 MHz Portable SDR Transceiver Instructions
WIFI Operation Instructions
SCAN button: Scan for nearby Wi-Fi / hotspots (Access Point)
CONNECT/DISCONNECT: Connect/disconnect the hotspot in the left list.
EDIT: Edit the element selected by the orange box on the right.
CONFIG: Move the orange box to the next.
EXIT: Exit the interface.
-
SYSTEM SETTING – WLAN – press MFK knob to enter the Wi-Fi setting interface
-
Select a Wi-Fi to connect by rotating MFK – press CONFIG
-
Press CONFIG to move to password – press EDIT to pop up the digital keyboard
-
Enter/delete password by rotating & press MFK knob
-
Click ENTER by rotating & press MFK knob to confirm password (important)
-
Press EDIT to exit the digital keyboard
-
Press CONNECT, please wait for about 10s
-
WiFi connected!
-
Press EXIT to exit the Wi-Fi interface
-
Wi-Fi connected confirmed!
Bluetooth Operation Instructions
Operation Instructions
OFF/ON: Turn on/off the built-in Bluetooth function.
CONNECT/DISCONNECT: Connect/disconnect the selected Bluetooth device on
the left.
EXIT: Exit the interface.
Note: When the built-in Bluetooth function is displayed as “ON”, it will
always scan the surrounding Bluetooth devices.
-
SYSTEM SETTING – WLAN – press MFK knob to enter the Bluetooth setting interface (for the first time, it should take about 1 minute to scan Bluetooth device, please be patient; will be 5s only from second time.)
-
Select a Bluetooth device by rotating MFK – press CONNECT to connect (please make sure your Bluetooth device is on)
-
Bluetooth connected!
-
Press EXIT to exit the Wi-Fi interface
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>