MOKON 140 to 500 Tons Outdoor Central Chillers Instructions
- June 12, 2024
- MOKON
Table of Contents
MOKON 140 to 500 Tons Outdoor Central Chillers
Product Information
Mokon’s outdoor air-cooled central chiller systems are designed for exterior installation, freeing up valuable indoor equipment space. This system features a direct-drive, low-speed, semi-hermetic compressor design. Rigorous design verification and testing processes help ensure consistently high quality.
Standard Features
- Pump Tank Systems: Mokon offers a line of stainless steel or epoxy-coated carbon steel pump tanks with capacities of 100 gallons and larger. These tanks can be easily integrated with a Mokon central process water chiller, cooling tower, or an existing cooling water system. Mokon’s pump tanks offer long-life, corrosion-resistant performance and are available in a wide range of capacities and configurations.
Mokon, 2150 Elmwood Avenue, Buffalo, New York 14207
Quality Certifications: 9001/14001:2015 RTAC 6/22 MOK8325
Product Usage Instructions
- Installation
- Select an appropriate outdoor location for the central chiller system.
- Ensure proper ventilation and clearance around the unit for optimal performance.
- Follow the manufacturer’s guidelines for electrical connections and plumbing.
- Integration with Pump Tank Systems
- If using a pump tank system, select the appropriate tank capacity based on your requirements.
- Ensure the pump tank is compatible with the Mokon central process water chiller, cooling tower, or existing cooling water system.
- Follow the provided instructions for integrating the pump tank with the central chiller system.
- Operation
- Power on the central chiller system and ensure it is properly connected to the electrical supply.
- Set the desired temperature and cooling parameters using the controls provided.
- Monitor the system for any abnormal behavior or malfunctions.
- 4. Maintenance
- Regularly inspect and clean the outdoor central chiller system to remove any dirt or debris that may obstruct airflow.
- Follow the manufacturer’s recommended maintenance schedule for component checks, lubrication, and filter replacements.
For further assistance or troubleshooting, refer to the product manual or contact Mokon’s customer support team.
Mokon’s outdoor air-cooled central chiller systems are designed for exterior installation, freeing up valuable indoor equipment space. This system features a direct-drive, low-speed, semi-hermetic compressor design. Rigorous design verification and testing processes help ensure consistently high quality.
Standard Features
- Air-cooled condenser with direct-drive vertical condenser fans
- Designed for outdoor ambient temperature of 0° to 125°F (fluid temperature 20° to 60°F)
- Superior EER ratings
- Semi-hermetic direct-drive rotary compressors
- Two independent refrigerant circuits
- Microprocessor-based controller +/– 1/2°F control capability (leaving water temperature)
- Variable compressor modulation to match capacity and offer better compressor control
- Meet efficiency levels of ASHRAE Standard 90.1
- Highly efficient shell and tube evaporator with Armaflex insulation and heat tape
- Low sound levels
- Loss of flow protection
- Low ambient control
- R-134A refrigerant
- Small footprint
- In accordance with AHRI 370
- 12 months parts warranty from start-up (max. 18 months)
Pump Tank Systems
Mokon also offers a line of stainless steel or epoxy-coated carbon steel pump tanks with capacities of 100 gallons and larger. Our tanks can be easily integrated with a Mokon central process water chiller, cooling tower or an existing cooling water system. Mokon’s pump tanks offer long-life, corrosion- resistant performance and are available in a wide range of capacities and configurations.
Contact
- Address: Mokon, 2150 Elmwood Avenue, Buffalo, New York 14207
- P 716-876-9951 |
- F 716-874-8048 |
- E sales@mokon.com
- mokon.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>