EUROtops 50491 Prestige Automatic Watch Instruction Manual

EUROtops 50491 Prestige Automatic Watch

Product Information

The BK620/50491 Automatic Watch Prestige is a self-winding mechanical watch that does not require a battery. It winds itself throughout the day as the wearer performs certain everyday movements while the watch is on their wrist. The watch has a power reserve of approximately 30 hours when fully wound with about 40 manual turns of the crown. It features a 24-hour display and is water-resistant up to 2 ATM. The band is made of cowhide leather.

This watch is a self-winding mechanical watch that does not require a battery, and winds itself throughout the day as its wearer performs certain everyday movements while the watch is on his wrist.

WATCH FEATURES

• Power reserve of the watch when fully wound (about 40 manual turns of the crown) and without being worn: about 30 hours
• 24 hours display watch
• Water resistant: 2 ATM
• Band: Cowhide leather

OPERATING INSTRUCTIONS

1. For the first time use, in order to start your watch, hand wind it manually by turning the crown clockwise about a number of 40 turns in normal crown position.
2. Then put the watch on your wrist to enable the watch’s movement to drive its proper functioning and wear it for 8 hours.

IMPORTANT NOTES:

• The watchband must be fitted correctly to the wearer’s wrist. If the watchband is too loose or too tight, the watch may lose some of its autonomy and may not wind itself correctly. For optimal winding, wear your watch daily.
• If you don’t wear the watch past 24 hours, the watch may stop, and you will then need to wind it manually to provide it with the necessary power reserve. Please repeat procedure quoted in steps n°1 and 2 above.
• DO NOT try to wind the watch any further after feeling this resistance as any further strain could cause the main spring to break.
• DO NOT turn the crown counterclockwise as this might damage the mechanism of the watch.

TIME AND DATE SETTING

• Position 0: Normal running position
• Position 1: DATE SETTING
  • Gently pull the crown to position 1 and turn it anticlockwise to set the date.
  • Push the crown to position 0 to confirm and complete the setting.
• Position 2: TIME SETTING
  • Pull the crown to position 2 and then turn it clockwise to set the time.
  • Push the crown back into the position 0 to confirm and finish.

WARNINGS

• To maintain the aesthetic appearance of your watch, avoid contact with perfumes, nail polish, varnish, cosmetics, cleaning products, adhesives, and paint, as they can cause discoloration, deterioration and damage.
• To prevent any risk from perspiration, dust and humidity, regularly wipe your watch with a soft, dry cloth.
• To ensure the longevity of your watch, do not attempt to open the watch casing.

Imported by EML – trading name Prodis 1, rue de Rome 93110 Rosny-sous- Bois-France/ Made in PRC
Marketed by EUROTOPS VERSAND GMBH, Elisabeth-Selbert-Str.3, D-40764 LANGENFELD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>