anko 43277414 TWS Earphone Instruction Manual
- June 12, 2024
- Anko
Table of Contents
anko 43277414 TWS Earphone
Includes
- TWS earphone
- Charging cable
- User manual
Function Overview
How to use the earphone
Specifications
Model No : 43277414
Function Operation
Play / Pause : Touch either L/R earbud
Siri : Triple-touch either Left or Right earbud
Previous : Long touch Left earbud
Next : Long touch Right earbud
Volume up : Double-click Right earbud
Volume down : Double-click Left earbud
Power ON / OFF Power ON :
Removing Earphones from charging case will automatically turn
Power OFF : Placing Earphones into charging case will automatically turn them
off
Note : The earbud will automatically turn off in 3-5 mins without any
connection.
Pairing The Earphones With Bluetooth® Devices
-
Go to ” Bluetooth Settings on your Bluetooth device (phone, tablet, etc.)
-
Turn the Bluetooth ON at your device, Open the charging case and remove the earphones, they will automatically turn on. The LED indicators on the left earbud flash blue and red as they already automatically sync to each other and a voice prompt “Connected” alerts, and they’re ready for connection with your device.
On your Bluetooth Device, select the pairing name on the list of available devices, select pairing name : KM 43277414. -
The Earphone LED indicator will slowly flash blue once connected, and a voice prompt “Connected ” will alert again when connected successfully.
-
Trouble shooting tip: if the Earphones do not connect to your device, turn the Earphones OFF, turn your device’s Bluetooth OFF and then back ON, then repeat the pairing process.
Pairing Between Left And Right Earphones
If the connection between the left and right earphones is lost, put both
earphones back inside the charging box, close it and wait a few seconds before
reopening. The earphones will automatically re-connect to each other.
If the process just described does not work, disconnect the earphones from
your device, wait a few minutes then reconnect them ( the earphones must be
placed inside the charging box ).
For both procedures, it is necessary that the earphones inside the charging
box are charging, so make sure that the charging box has a sufficient charge
level to ensure the charging of the earphones.
Phone Calls
When there is an incoming call, the unit will pause the playback and ring to
alert you of the call.
To answer the call, double-click the earphone . To end a call, double-click
the earphone when finished. To decline an incoming call, press and hold either
earbud for 1 seconds.
Playing Music
Click either the left or right earphone once to pause playback, click either earphone once again to resume playback. Long Press the Left earbud for 2 seconds to play previous track. Long Press Right earbud for 2 seconds to play next song.
Battery Charging
When using for the first time, charge the battery to maximum capacity. To recharge, plug the charging cable into the charging port. The flashing Red light at the top of the charging box indicates that charging is in progress. When the Red light turn solid, charge is completed for charging box. When the earphones are placed inside the charging box, charging will begin and a Blue light indicates the charging case and a red flashing light will light up on each earphone. When the light off, the earphones will be fully charged.
Charging voltage: D.C 5V
Charging case battery capacity: 250mAh
Frequency response: 20Hz-20KHz
Working Distance: 10 meters
Music Time: 4 Hours
Talk time: 3.5 Hours
Standby time: 40 Hours
Earphone charge time: 1.5 hours
Charging case charge time: 2 Hours
Rated power: 3mW
Max power: 5mW
Charging port: Type-C
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., and any use of such marks by KMART AUSTRALIA is under license
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with the
accompanying recommendations or instructions where provided. This warranty is
in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where
possible) for this product if it becomes defective within the warranty period.
Kmart will bear the reasonable expense of claiming the warranty. This warranty
will no longer apply where the defect is a result of alteration, accident,
misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively, via Customer Help at kmart.com.au for any difficulties with
your product. Warranty claims and claims for expense incurred in returning
this product can be addressed to our Customer Service Centre at 690 Springvale
Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
WARNING :
- Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
- Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- This product shall not be connected to power supply source exceeding PS1 . Rated 5V d.c. 1A .
- Marking information is located at bottom of the unit.
- Please note the product working temperature is : 0-40 ℃.
- This TWS earphones shall be charged by the supplied charging unit only.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>