BLAUPUNKT BP5001 Hair Clipper User Manual
- June 12, 2024
- Blaupunkt
Table of Contents
BLAUPUNKT BP5001 Hair Clipper User Manual
HAIR CLIPPER 5001
Dear customer, Many thanks for choosing to purchase a BLAUPUNKT brand product
Thanks its technology, design and operation and the fact that it exceeds the
strictest quality standards, a fully satisfactory use and long product life
can be assured
DESCRIPTION
- Blades
- Blade shift lever
- On/off switch
- 3mm comb guide (1/8 inch) # 1
- 6mm comb guide (1/4 inch) # 2
- 9mm comb guide (3/8 inch) # 3
- 12 mm comb guide (1/2 inch) # 4
- Right side comb (*)
- Left side comb (*)
- Comb
- Bottle of lubricating oil
- Cleaning brush
- Blades protective cover
Read these instructions carefully before switching on the appliance and keep them for future reference. Failure to follow and observe these instructions could lead to an accident
SAFETY ADVICE AND WARNINGS
- This appliance can be used by children aged from 3 years under supervision
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- This appliance is not a toy. Children should be supervised to ensure that they do not play with the appliance
- Cleaning and user maintenance shall not be made by children without supervision
- WARNING : Do not use this appliance near bathtubs, showers, basins or other vessels containing water
- This symbols means that product ,must not be used near water
- If the connection to the mains has been damaged, it must be replaced, take the appliance to an Authorized Technical Support Service. Do not attempt to disassemble or repair the appliance by yourself in order to avoid a hazard
- Ensure that voltage indicated on the rating label matches the mains voltage before plugging in the appliance
- Connect the appliance to a socket that can supply a minimum of 10 amperes
- The appliance’s plug must fit into the mains socket properly. Do not alter the plug. Do not use plug adaptors.
- Do not force the power cord. Never use the power cord to lift up, carry pr unplug the appliance.
- Do not wrap the power cord around the appliance
- Do not allow the power cord to hang or to come into contact with the hot surfaces of the appliance
- Check the state of power cord. Damaged or tangled cables increases the risk of electricshock
- Do not touch the plug with wet hands
- Do not use the appliance if the cable or plug is damaged
- If any of the appliance casings breaks, immediately disconnect the appliance from the mains to prevent the possibility of an electric shock
- Do not use the appliance if it has fallen on the floor, if there are visible signs or if it has a leak.
- Do not leave the appliance out in rain or exposed to moisture. If water gets into the appliance, this will increase the risk of electric shock
- CAUTION : Maintain the appliance dry.
- Do not use the appliance with damp hands or feet, or when barefooted
- Do not touch any of the appliance’s moving parts while it is operating.
USE AND CARE:
- Do not use the appliance if its accessories are not properly fitted or are defective. Replace them immediately.
- Do not use the appliance on wet hair.
- Do not use the appliance if on/off switch doesn’t works
- If you use the appliance in a bathroom or similar place, unplug the appliance from the mains when it is not in use, even if it is only
- for a short while, as proximity to water involves a risk, even if the appliance is disconnected.
- Disconnect the appliance from the mains when not in use, before undertaking any cleaning task; make any adjustment or accessory change.
- This appliance is for household use only, not professional or industrial use.
- Store this appliance out of reach of children and/or persons with physical, sensory or reduced mental or lack of experience and knowledge.
- Never rest the appliance into a surface while in use.
- Keep the appliance in good condition. Check that the moving parts are not misaligned or jammed and make sure there are no broken parts or anomalies that may prevent the appliance from operating correctly.
- Keep children and bystanders away when using this appliance.
- Do not use the appliance with pets or animals
SERVICE
- The appliance has been oiled in origin, In order to maintain the appliance in good operation conditions we suggest greasing the blades every time you clean it by putting a few drops of oil on the ends of the blade, and finally switching on the appliance during a few seconds.
- Make sure that the appliance is serviced only by specialist personnel, and that only original spare parts or accessories are used to replace existing parts/accessories
- Any misuse or failure to follow the instructions for use renders the guarantee an
INSTRUCTIONS FOR USE BEFORE USE:
- Make sure that all the product’s packaging has been removed
INSERTION OF A COMB GUIDE: (FIG 1)
- To attach the comb guide, pick up by its two tips and press against the blades of the appliance until is firmly fixes
- To extract the comb guide, just pull out. USE:
- Unroll the cable completely before plugging it in.
- Remove the protective cover (Fig.1)
- Connect the appliance to the mains.
- Make sure that the blades are correctly aligned.
- Turn the appliance on, by using the on/off switch
HOW TO CUT THE HAIR:
- Situate the person whose hair you are going to cut so that the top of their head is at your eye level. Place a protective towel or cloth around their neck.
- To obtain best results is better to use the appliance on dry hair, as it is much easier to control the hair and the results
- Comb hair well before cutting. Make sure that there are no tangles or knots.
- Hold the appliance in calm and relaxed manner in order to ensure maximum control of the cut and uniform result. Proceed to use short cuts gradually going around the head.
- Leave the hair a little longer than desired length as it can always be altered later.
- While working adapt the comb/comb guide to the desired result
- At regular intervals, stop cutting in order to comb the hair and check the results so far.
STEP 1 – NAPE:
- Attach the comb guide size 3 / 6 mm
- Hold the appliance with the razor facing downwards and begin to cut the hair from the base of the neck.
- Make some upward movements, raising the appliance gradually and away from the head, cutting the hair gradually until the height of the ears (Fig.2)
STEP 2 – BACK OF HEAD:
- Attach comb guide size 9 / 12mm and continue with the back of the head (Fig.3)
STEP 3 – SIDE OF HEAD:
- Attach a new shorter guide, size 3 / 6 mm to trim the sideburns.
- Attach the longest comb guide size 9 / 12 mm again and continue until you reach the top of the head.
STEP 4 – TOP OF HEAD:
-
Using comb guide size 9 / 12 mm, pass the appliance from the back to the front, against the growth of the hair (Fig.4). In some cases it’s necessary to go over what you have done a second time from front to back.
-
The comb guide size 3 / 6 mm is for when you want to achieve a more precise cut.
-
Use comb guides size 12 mm to leave hair at a longer length. Hold the hair up with the comb or the comb and your fingers and cut.
-
Always work form back to the front reducing the length between your fingers or the comb and the head gradually.
STEP 5 – FINAL TOUCH:
- Finally use the appliance without attaching any comb guides to the blades to cut the hair around the base of the neck, the sides of the neck and the ears.
- To make sideburns straight, turn the appliance over to use the upper blades (Fig.5). Move the appliance adapting it the physiognomy of the head. To achieve more precise results use a shaver
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
- Turn the appliance off, using the on/off switch
- Unplug the appliance from the mains
- Clean the appliance
- Put on the protective cover.
CLEANING:
- Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance
- Never submerge the appliance in water or any other liquid or place it under running water.
- Clean the blades and the comb guide with the cleaning brush. Remove the hairs from the blades and from inside the appliance with the brush. It is important to clean off remaining hairs after each use.
- NEVER disassemble the blades from the appliance to clean.
ANOMALIES AND REPAIR:
- Take the appliance to an authorized technical support service if product is damaged or other problems ariseDo not attempt to disassemble or repair the appliance yourself as this may be dangerous.
- If the connection to the mains has been damaged, it must be replaced and you should proceed as you would in the case of damage
DECLARATION OF CONFORMITY
Manufacturer Name: RAMSONS, S.A.
Adress: Pedro Muñoz Torres nº 1
Post Code: 41006 SEVILLA
We declare under our responsibility that the product:
Product Description: HAIR CLIPPER
Model: BP5001
Brand: BLAUPUNKT
It complies with the European Union legislation in compliance with the 2004/108 / EU guidelines
The standards apply:
- 2014/35/EU,
- 2014/30/EU,
- 2011/65/EU,
- 2009/125/EC
Name: Vivek Sadhwani
Position : manager
Date: 29 de November 2020
Signature:
Ramsons, S.A,
Pedro Muñoz Torres Nº 1 NAVES HYTASA 41006 SEVILLA
Tfn. 954 933 404 • Fax. 954 660 533
USER
DATE OF SALE
Seller’s signature and stamp
IMPORTANT: To make the guarantee effective, the SELLER must fill out, sign and stamp this Certificate. To receive assistance under the conditions set forth in this certificate, please submit to the Technical Service Authorized, this document next to the Purchase Invoice
INFORMATION ON RECYCLING
Disposal of the old appliance, the European Directive 2002/96 / EC on waste equipment Electrical and Electronic (WEEE), establishes that old appliances can not be thrownas municipal waste without normal classification. Appliances have to be collected separately with theto optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment.
The symbol “container with wheels” crossed out on the product reminds you of obligation, that when you dispose of the device must be collected separately.
Consumers should contact the local or retail authority to obtain information about the correct disposal of your old device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>