NANO CIC2 Recharge OTC Hearing Aids User Guide
- June 12, 2024
- NANO
Table of Contents
Quick Start Guide
COMPLETELY IN CANAL
OTC HEARING AIDS
CIC2 Recharge OTC Hearing Aids
For detailed information on how to use your CICs, please refer to the User
Manual.
FRONT
Charge Your Hearing Aids
STEP ONE
Connect the enclosed power cord to the charging case to charge the hearing
aids. Hearing aids should be fully charged before using for the first time.
LED lights on the charging case will indicate charge status of hearing aid and
charging case.
Indicator Lights
| Orange lights | Hearing aid/charging case is charging |
|---|---|
| Green lights | Hearing aid/charging case is fully charged |
It will take approximately 2 hours to fully charge hearing aids.
Insert Hearing Aids
STEP TWO
Tip: If uncomfortable feedback/chirping is experienced during the insertion process, hearing aid may be turned off prior to insertion. Once hearing aid is in the ear, turn hearing aid on.
Make Adjustments to Your Hearing Aid Using the Button
STEP THREE
If hearing aid is off, press and hold the button for 4 seconds until it
turns on.
Make adjustments to your hearing aid by using your finger or thumb to control
the multi-function button on the faceplate.
Remove Hearing Aid
STEP FOUR
Grasp removal handle and gently pull hearing aid out of ear.
Wipe dome clean from any ear wax, oils, moisture, etc.
Tip: After removing hearing aids from ears, turn hearing aids off. Return them to charging case when not in use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>