Nano Hearing Aids BTE 4 Rechargeable Hearing Aids User Guide
- June 13, 2024
- Nano Hearing Aids
Table of Contents
Nano Hearing Aids BTE 4 Rechargeable Hearing Aids
For detailed information on how to use your BTEs, please refer to the User Manual.
BTE4 HEARING AIDS AND CHARGING CASE
Charge Your Hearing Aids
Hearing aids should be fully charged before using for the first time.
Indicator Light on Charging Case
- Orange lights Hearing aid is charging
- Green lights Hearing aid is fully charged
It will take approximately 3.5 hours to fully charge hearing aids.
Insert Hearing Aids
-
Blue indicator for left ear.
-
Red indicator for right ear.
-
Hold the thin tube bend with your thumb and finger as shown. Gently insert the dome into your ear canal.
-
Using your finger, position the stabilizer into the curvature of your ear. The stabilizer helps keep the aid secure in your ear.
-
Place hearing aid behind your ear.
Turn hearing aid on
If hearing aid is off, press and hold the lower button for 3 seconds until the
hearing aid turns on.
Make Adjustments to Your Hearing Aid Using the Upper and Lower Button
Remove Hearing Aid
- Grasp thin tube bend at the entrance of the ear canal.
- Gently pull thin tube out of ear, removing dome from ear.
- Remove hearing aid from behind the ear.
- Wipe dome clean from any wax, oils, moisture, etc.
- Power aid off. Place aid in charging case when not in use.
Tip
To avoid feedback/chirping when aid is being removed, turn aid off prior to removal.