LINK-MI LM-TV06P Video Wall Controller User Manual

LINK-MI LM-TV06P Video Wall Controller

Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

• Make sure that all devices you will be connecting up are properly grounded.
• Make sure that the power to all the devices you will be connecting up has been turned off.
• Do not place other objects on the cable.
• Risk of electrical shock, do not open.
• To avoid damaging the product, do not dismantle it by yourself, the device should be repaired and maintained by professional and qualified personnel in the designated service center.
• Do not place any object into the opening of the casing, otherwise, it might cause a voltage or short circuit incident.
• The installation site must be well-ventilated. Ensure that air vents on the equipment are not blocked.

Introduction

This 2×3 video wall controller supports 1x HDMI 2.0 in, 1x HDMI 1.4 in, and 1x DP 1.2 in, max resolution support 4K@60Hz 4:4:4 HDCP 2.2. It allows any of 3 inputs routed to the 6 HDMI outputs. Users can choose different video modes via remote like 2×3 video wall mode, PIP (picture in picture) mode etc to meet their needs.
This 4K video wall controller offers solutions for home, office, digital entertainment, center, conference room, school, and other digital TV use environments.

Feature

• 2×3 video wall controller comes with 1x HDMI 2.0 in, 1x HDMI 1.4 in and 1x DP in; 6x HDMI out.
• Max resolution up to 4K@60Hz 4:4:4, HDCP 2.2, DP 1.2 max 4K@60Hz.
• Easy to set up and control, support control via front buttons and remote.
• Support image rotation 90°, 180°, 270°, and Mirror left and right, flip up and down.
• Support 3.5mm analog audio out.
• Support automatically adjusts border function and crop image function, Display without black edges.
• The support roaming window and support input of the splicer can be resized and positioned at any position.
• Supports intelligent temperature control protection technology, making the product’s heat dissipation performance more stable, reliable and durable.
• Silent smart fan, no noise at work.

Package Content

1. 1x Main Unit (4K 2×3 Video Wall Controller)
2. 1x Power Cable
3. 1x Remote
4. 1x User Manual

Technical Parameters

3840×2160@30Hz

HDMI 2| HDMI 2.0, HDMI embedded audio, resolution support 640×480 to

3840×2160@30Hz

DP| DP 1.2, DP embedded audio, resolution support 640×480 to

3840×2160@60Hz

Output Signal|
HDMI 1| Support 2×3, 3×2…video wall mode, max resolution support

1920×1080@60Hz

HDMI 2| Support 2×3, 3×2…video wall mode, max resolution support

1920×1080@60Hz

HDMI 3| Support 2×3, 3×2…video wall mode, max resolution support

1920×1080@60Hz

HDMI 4| Support 2×3, 3×2…video wall mode, max resolution support

1920×1080@60Hz

…| …
HDMI 6| Support 2×3, 3×2…video wall mode, max resolution support

1920×1080@60Hz

Audio Output| 3.5mm audio interface; Support left and right channel stereo, audio and

video signal synchronous switching

Other|
Stitching Mode| Simple 6 stitching
Control| IR remote, front buttons
Rotation| 90°, 180°, 270°
Supply Voltage| 220V
Power Consumption| 30W
Chassis Specification|
Product Size (mm)| 420x320x68 mm (LxWxH)
Product Weight (kg)| 5.7 kg

Panel Description

Front Panel

• IR: IR light
• POWER : Power light
• SPLICING : Video wall mode/cancel video wall mode
• SOURCE: Switch input source
• MENU: Menu/Back to the previous level
• ОК
• UP: Up menu option
• DOWN: Down menu option
• LEFT: Left menu option
• RIGHT: Right menu option

• HDMI1: HDMI 1.4 input port
• HDMI2: HDMI 2.0 input port
• DP: DP 1.2 input port
• AUDIO: Analog audio out
• HDMI 1-6 channel
• DC 12V: Power input

Remote Description

Connection

Installation

Take LM-TV09P (9 HDMI outputs) as a sample.

1. Connect the input source(HDMI1 /HDMI2 /DP) to the video wall controller.

2. 9 output ports connect 9 TVs.

3. Use the remote or press the front button MENU to select the splicing menu,(The user can use
   LEFT, RIGHT, UP, and DOWN choose splicing mode), and set the mode to 3×3.

4. Select HDMI port NO. And splicing NO. And adjust according to the prompts in the upper left corner of the screen (for example 3×3 mode, set the first screen HDMI port to 1 and the Splice Position number is 1 , and the upper left corner will show: Splice Mode 3×3, HDMI port 1 and Splicelnder 1)

5. The other 8 screen settings are the same.

6. Press the SOURNU+ LETF/RIGHT key to choose and switch the input signal. If via remote can Press INPUT+ LEFT/RIGHT key)

Roaming Window settings

1. Press the MENU+LET/RIGHT key into roaming window mode. Then press the HIGH/LOW key select Roaming Windows mode and press OK to choose, the roaming Windows mode supports 1 P, 2PLR, 2PTR, PIP, and 4P modes.
2. Press OK button to enter PIP mode.
3. Press the SOURNU left/right keys to select the input signal or (remote INPUT+ left/right key) to switch the first screen signal to HDMI 1 Press OK to select the first window, so that the icon runs to the switching signal and press left and right to adjust to the switch Confirm the signal with OK. (USER can adjust the PIP position, transparency, and size by remote. also can save display mode to 1-9.then next time you can press 1-9 key to use saved mode directly. )

Video mode

Main Menu instructions

1. Image menu: adjust brightness, chroma, and contrast.
2. Setup menu: Set splicing mode, splicing position, border blanking; border blanking function: this function only takes effect when the screen is in a splicing state, the default value is zero, and adjusting the size of this value can remove part of the border image
3. Image menu: Image rotation, adjust screen scale mode, automatic dormancy; image rotation: can rotate 90 degrees, 180 degrees, 270 degrees, left and right mirror, up and down mirror flip. Proportional pattern: support 16:9 4:3 5:4 1: 1.
4. Time menu: Set language, restore factory settings, panel key light turn on/off.
5. Cutting Black Edge: Adjusts the horizontal vertical position only in the 1 P(3×3 video wall mode) splicing state, and sets the image width height.

Troubleshooting

No Image

1. Verify the input source is powered on and connected to controller box.
2. To confirm display device is turned on and connected to the controller box.
3. Check the system connection status.
4. Check the cable is intact.
5. Try restarting the device to re-catch the signal.
6. Try to use another input source.
7. Check if select the correct signal.

No response use remote

1. Check if there is any abnormality in the remote control and whether there is a battery.
2. Check if the distance is too far and if there are any obstacles in the middle.

Image out of order

1. Check whether the row and column positions are set correctly.
2. Check whether the screen serial number is consistent with the controller box HDMI outputs.

Image blurred

1. Re-plug the connector to prevent the socket interface from being bad.
2. Wire quality (HDMI cable requirements in line with HDMI 1.4 standard)
3. Check the screen and the input source.

SHENZHEN LINK-MI TECHNOLOGY CO., LTD.
WWW.LINK-MI.COM
E-mail: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>