BLACK MIRROR nano Timemore Coffee Weighing Panel User Manual
- June 3, 2024
- BLACK MIRROR nano
Table of Contents
BLACK MIRROR nano Timemore Coffee Weighing Panel
Parts & Functions
Ⓐ Base x 1
Ⓑ Standby/ Tare Button
Ⓒ Power Button / Power off completely
Ⓓ TYPE-C Charging Port
Ⓔ Timer Button
Ⓕ Flow Rate Button
Ⓖ Silicone Pad x 1
Ⓗ TYPE-C Cable x 1
Button Introduction
Display Introduction
❶ mar/ Flow rate: To record time (Max. 59min 59s)
To show flow rate (Max. 99.9g/s)
❷ Battery indicator: Indicates the current power ( please charge in time when
power is low)
❸ Sound indicator: Indicates the sound prompt is on
❺ Auto timing mode indicator: indicates Auto timing mode is currently on
❻ Weight: Max. 2kg
PS: The operation label shows each function and description of each button. It can be removed after you are familiar with the operations.
How to use
The following reference uses examples and actual operation will vary according to your workflow.
-
Put a brewer on the scale and saturate the paper filter. Turn it on and quick press to tare.
-
Add ground coffee to reach the desired weight.
-
Tare again and quick press the timer button. Now start to brew. The timer can help you control the timing of the bloom and pour. Quick press the flow rate button to check the flow rate without pausing the timer.
-
When brewing finishes, quick press the timer button to pause timing and the weighing panel will display your brewing data.
Pour-over Timing Mode Must be in Regular Mode to turn on
The cycle Sequence will be Regular Mode, Pour-over timing Mode and Espresso
Mode.
Quick press the timer button 3 times until an audible beep and the Auto Timing
Mode indicator lights up.
Place a brewer on the panel and add ground coffee. Then quick press the timer
and wait for a 3-second countdown.
After the countdown is over, the weight value will auto-tare and you can start
brewing. Timing starts as soon as the weight begins to change (the record is
valid when more than 40s is recorded)
If the brewer is removed, the timer will stop and the brewing time will flash.
At this time, if you put the brewer back and quick press the timer button, it
will continue weighing and timing. Then you can quick press the timer button
again to end recording. Long press the timer to enter standby mode.
Espresso Timer Mode Must be in Pour-overtiming Mode to turn on
The cycle Sequence will be Regular Mode, Pour-over timing Mode and Espresso
Mode.
Quick press the timer button 3 times to start Espresso Mode. The timer zone
will display ESP.
The Auto-brewing mode indicator A will flash slowly for 1 second.
When you put a cup on the scale, it will tare automatically. When the scale
detects coffee droplets landing in the cup, timing will start automatically.
When brewing is over and the cup is removed, timing and weighing both stop
automatically and the recorded values will flash. The values will then
automatically clear and return to the initial state of displaying ESP and 0.0.
Specification
- Product Name: TIM EMORE BLACK MIRROR Nano Coffee Weighing Panel
- Measure range: 0.2g-2000g
- Storage temperature: -10 C to 55 C
- Use temperature: Surface-10C to 60C With Silicone pad: -20C to 100C
- Button: Capacitive touch ( no need to press hard l
- Assistive indicator: Built-in buzzer
- Battery: Built-in 900mAh Lithium rechargeable battery Standard Voltage: 3.7V Voltage range: 3.4V -4.25V
- Charging way: Chargeable Lithium battery 5V DC/1A with TYPE-C cable A charger is not included.
Charger info: 220V AC/110V AC Output:5V/1A For fast charge, please use DC 5V / 2A charger.
Note
- DO NOT use a quick charger. DO use a 5V /1 A charger.
- Place the scale on a horizontal and smooth surface.
- Do not attempt to weigh while charging.
- This device is powered by a lithium battery. DO NOT wait until the scale battery dies to charge it, instead, charge it in time after you use it.
- When timing is off, the scale will shut down automatically after 3 minutes.
- Only the scale surface is waterproof. DO NOT get liquid in the gap between the shell and charging port.
- Uninstalling internal equipment will void the warranty.
- This device is 1 year limited warranty. Dismantling or man-made damage is not included.
- This scale is an accessory for coffee brewing only and is not legal for trade.
Product name: TIM EMORE BLACK MIRROR nano Coffee Weighing Panel
Item’s number: TES010
Include: Weighing Panel, TYPE-C Charge Cable, Silicone Pad, User manual
(Warranty Card)
Company: Shanghai TIM EMORE Coffee Equipment CO., LTD.
Warranty: 1 year limited warranty
Web: www.timemore.com
Contact: info@timemore.com
@TIMEMORECOFFEE
202l©Shanghai TIMEMORE Coffee Equipment CO.,LTD.AII rights reserved.
Designed by TIM EMORE in China, Made in China
Documents / Resources
|
BLACK MIRROR nano Timemore Coffee Weighing
Panel
[pdf] User Manual
Timemore Coffee Weighing Panel, Timemore, Coffee Weighing Panel, Coffee Panel,
Weighing Panel, Panel
---|---
|
BLACK MIRROR nano Timemore Coffee Weighing
Panel
[pdf] User Manual
Timemore Coffee Weighing Panel, Timemore Weighing Panel, Coffee Weighing
Panel, Weighing Panel
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>