NANO HEARING AIDS BTE Plus Hearing Aids User Guide
- June 13, 2024
- Nano Hearing Aids
Table of Contents
NANO HEARING AIDS BTE Plus Hearing Aids
Product Information
The Behind the Ear (BTE) OTC Hearing Aids are designed to provide assistance for individuals with hearing impairments. The BTE Plus Hearing Aids come with a Charging Dock for convenient charging. The product features color-coded right/left indicators, microphones, a charging light, thin tube dome, stabilizer, and a rocker switch.
INSTRUCTION
For detailed information on how to use your BTEs, please refer to the User Manual.
BTE PLUS HEARING AIDS AND CHARGING DOCK
Charge Your Hearing Aids
- Hearing aids should be fully charged before using for the first time.
- When properly inserted in the charging dock, the light in the center of the hearing aid rocker switch will illuminate.
Indicator Lights on Rocker Switch
- Blue light: Hearing aid is charging
- Green light: Hearing aid is fully charged
It will take approximately 3.5 hours to fully charge hearing aids.
Insert Hearing Aids
Hold the thin tube bend with your thumb and finger as shown. Gently insert the dome into your ear canal.
Using your finger, position the stabilizer into the curvature of your ear. The
stabilizer helps keep the aid secure in your ear.
Place hearing aid behind your ear.
Turn hearing aid on.
If hearing aid is off, press and hold the upper portion of the rocker switch
for 4 seconds until the hearing aid turns on.
Make Adjustments to Your Hearing Aid Using the Rocker Switch
For information on using the Nano Hearing App to control the volume or programs, please reference the User Manual.
Remove Hearing Aid
Grasp thin tube bend at the entrance of the ear canal. Gently pull thin tube out of ear, removing dome from ear.
- Remove hearing aid from behind the ear.
- Wipe dome clean from any wax, oils, moisture, etc.
- Power aid off. Place aid in charging dock when not in use.
Tip: To avoid feedback/chirping when aid is being removed, turn aid off prior to removal.