Outin nano OTEM-01-CR-UK Portable Espresso Maker Instruction Manual
- July 13, 2024
- Outin nano
Table of Contents
Outin nano OTEM-01-CR-UK Portable Espresso Maker
Product Specifications
- Model: XYZ123
- Color: Black
- Material: Plastic
- Dimensions: 10 x 5 x 3 inches
- Weight: 1.5 lbs
Product Usage Instructions
Assembly
Follow these steps to assemble the product
- Connect part A to part B using the provided screws.
- Insert part C into the slot on part A.
- Secure all parts in place and ensure they are tightly fastened.
Powering On
- To power on the product, locate the power button on the side and press it for 3 seconds until the indicator light turns on.
Setting Up
- Once powered on, follow the on-screen instructions to set up your preferences such as language, time, and date.
Usage
- Use the control panel to navigate through different modes and settings. Refer to the user manual for specific functions of each button.
Frequently Asked Questions
Q: How do I clean the product?
A: Use a soft, damp cloth to wipe the surface of the product. Avoid using harsh chemicals or abrasive materials.
Q: Can I use the product outdoors?
A: This product is designed for indoor use only. Avoid exposing it to extreme temperatures or moisture.
Q: What should I do if I encounter an error message?
A: If you see an error message on the display, refer to the troubleshooting section of the user manual or contact customer support for assistance.
- Thank you for purchasing the Outin Nano portable electric espresso machine.
- Please read the manual carefully before using the device.
- Please keep the instructions safe in case you need to use them again in the future.
- Customer Service: Support@outin.com
Name of Parts
- A. Lid
- B. Water Tank
- C. Body
- D. Button
- E. LED Indicator
- F. Capsule Adapter
- G. Portafilter
- H. Ground Coffee Filter Basket + Shower Screen
- 1. Coffee Cup
- J. USB-C Cable
- K. Ground Coffee Spoon
How to Use
Brewing with Coffee Capsule
- Remove the portafilter and the adapter.
- Find the capsule adapter, Push the capsule firmly into the capsule adapter.
- Make sure the capsule is pressed to the bottom.
- Insert the capsule adapter into the portafilter (aluminum side facing down).
- Screw the portafilter set back onto the main body tightly.
- Attach the coffee cup to the main body, and make sure the entire machine is placed on a stable, flat surface.
- Open the upper lid, fill in the water, and put the lid back on.
- For a standard 30ml cup of espresso, it is recommended to use 50ml of water.
Press the button to start brewing:
- a) For cold water: Press & hold the button for 2 seconds until the beep, heating time lasts up to 200s. Extraction starts after the second beep.
- b) For hot water: Double click/ Press & hold the button for 5 seconds to start extraction directly.
Brewing with Ground Coffee
- Remove the portafilter and the adapter.
- Find the ground coffee filter basket kit, and remove the shower screen.
- Load one full spoon of ground coffee (about 5-7g), then transfer the ground coffee into the filter casket
- Tamp the ground coffee firmly with the spoon’s bottom until the basket is 80% full.
- Put the shower screen back on. Insert the filter basket into the protafilter with the shower screen facing up.
- Screw the portafilter set back onto the main body tightly.
- Attach the coffee cup to the main body, and make sure the entire machine is placed on a stable, flat surface.
- Open the upper lid, fill in the water, and put the lid back on.
- For a standard 30ml cup of espresso, it is recommended to use 50ml of water.
Press the button to start:
- a) For cold water: Press & hold the button for 2 seconds until the beep, heating time lasts up to 200s. Extraction starts after the second beep.
- b) For hot water: Double click/ Press & hold the button for 5 seconds to start extraction directly.
Button Guide
Single press
- When standby, press the button once to check the battery level.
- When operating, press the button once to stop the brewing process.
Double press / Press for 5 seconds
- Press the button twice to start the extraction process directly (for boiled water).
Press for 2 seconds
- Press and hold the button for 2 seconds to start the heating program (for cold water). When the heating is completed (the water temperature reaches above 92°C), the extraction process will automatically start.
LED Indicator Guide
- The LED lights display battery percentage.
- When standby, press the button once to check the battery level.
- When plugged in, the LEDs will breathe and display the battery level. When fully charged, all 4 lights will be on for 1 minute before turning off.
Battery level:
- The LED light bar indicates the real-time water temperature during the heating process.
- The real-time water temperature during heating.
Clean and Maintenance
External body cleaning
- For daily maintenance, wipe the product with a damp cloth to remove any dust or dirt.
- Clean the exterior of the machine with a sponge and detergent, and carefully wipe the body to keep it dry. Make sure the charging port is protected by the rubber cap.
- DO NOT submerge the body part in water.
- DO NOT wash the main body directly with flowing water. All other parts are washable besides the main body.
Internal body cleansing
- Disassemble the lower detachable parts.
- Fill the water tank with water.
- Double-click the power button to run the water through the interior.
- Internal body cleaning is recommended before each use (without capsules or ground coffee), which also prevents brewing failure.
Detachable parts cleaning
- All the detachable parts, including the coffee cup, portafilter, capsule adapter, ground coffee filter basket kit, and upper lid, can be washed with flowing water.
- Before cleaning, please remove the detachable parts from the main body.
Maintenance advice
- Please clean the machine and parts after use. Make sure all parts are clean and dry before storing.
- Store this machine in a cool and dry environment. Before long-term storage, please charge the battery regularly.
Charging Guide
- Please make sure it is fully charged before first use.
- When the light flashes twice and beeps once during operation, the battery is low and needs to be charged.
- Uncover the rubber sleeve over the charging port, the Type-C interface is inside. The machine can be charged by an adapter compatible with 5V/3A (phone charger, mobile power bank, etc.). It will automatically stop charging when the battery is full. Please disconnect the charger then.
- It is recommended to use the original charging cable provided in the package.
- This machine cannot operate while charging.
- Note that low-quality adapters and cables may cause longer charging time and charging failure, or even possible damage to the machine.
Troubleshooting
How many cups of coffee can be made with one full charge?
*Recommend to use 50ml of water to get a standard 30ml cup of espresso.
Cold Water| 3-5 Cups
Hot Water| 200 Cups
Extraction Failure (coffee not coming out)
Stop working
Few crema
| Brewing Method | Possible Cause | Recommended Solution |
|---|---|---|
| Ground coffee | Coffee beans or pre-ground coffee is not fresh. | Use fresh |
roasted coffee beans or fresh pre-ground coffee.
Coffee is ground too coarsely.| Use a slightly finer grind.
Too little ground coffee in the filter basket.| Increase the dose of coffee.
It is recommended to use more than 6g of coffee.
Coffee capsules| Coffee capsules are not fresh.| Use coffee capsules within
the expiry date.
Not install properly.| Push the capsule firmly into the holder and put the
capsule holder into the portafilter properly.
Water leaks when operating
| Possible Cause | Recommended Solution |
|---|---|
| Not tightened enough. | Follow our instructions, make sure the capsule/filter |
basket is installed properly, and screw tightly.
Did not install shower screen properly.| Make sure to close the shower screen
properly when you use ground coffee.
Not heating
| Indicator Light Status | Possible Cause | Recommended Solution |
|---|---|---|
| Rotating Flashing Light | Press the button for too long. |
If held for5s, it will directly activate the extraction
program (equivalent to the double-click function).
| Press and hold the button for 2s, after one beep, the heating process begins, which will take up to 200s.
Not charging
Please refer to the “Charging Guide” section for details.
Please check the video for reference.|
---|---
Contact Us
- As we may not have foreseen all uses of your appliance, should youneed any additional information, in case of problems or simply seeking advice, please contact Outin Customer Support for help.
- Customer Support: Support@outin.com
Documents / Resources
|
Outin nano OTEM-01-CR-UK Portable Espresso
Maker
[pdf] Instruction Manual
OTEM-01-CR-UK Portable Espresso Maker, OTEM-01-CR-UK, Portable Espresso Maker,
Espresso Maker, Maker
---|---