NANO CAIXA 104HP Fully Portable Eurorack Modular Case User Manual
- June 9, 2024
- NANO
Table of Contents
Quick guide
CAIXA 104HP Fully Portable Eurorack Modular Case
Thank you for choosing CAIXA 104.
Powering up
-
Power Cable
CAIXA 104 is shipped with 3 different power cables in order to match the socket available in your location: EU Plug / USA Plug / UK Plug -
Power Brick
CAIXA 104 uses a 60W center-pin-positive adapter to convert the voltage from your socket to a regulated 15V which is used to power the entire system. -
Power Input Connector
Located in the upper side of CAIXA104, next to the handle.
Procedure
- Insert the Power Cable to the power brick.
- Then the Power Brick jack output to the Power Input in the Connectors section.
- Switch the power ON and see if the busboard LEDs are lighting up. If not, please check your connections and try it another time.
If the problem continues, please contact us and we will provide further assistance.
Layout
CAIXA 104 is an advanced fully portable 104HP Eurorack modular case, with a wide range of utilities fully integrated on it. Connect up to 18 modules and carry it anywhere you go thanks to its handle.
• Front View
• Top View
3 Outputs L/R
Impedance balanced audio outputs which connect to the Stereo & Headphone Out
utility module on the front of CAIXA.
4 Inputs L/R
Balanced audio inputs which connect to the Balanced Inputs utility module on
the front of the CAIXA.
5 DC IN
CAIXA power input. Always connect the included power supply, it only works
with 15V 4A center positive adapters.
6 ON/OFF Switch
Turn your CAIXA ON and OFF easily with this switch.
Utility modules
-
Balanced Inputs
Connect any audio source to CAIXA’s balanced audio inputs. With 20dB of amplification, you have enough range to connect whatever you want to use in your modular system (another synthesizer, a drum machine…)
The LEVEL LEDs will show the signal volume, and the CLIP LEDs will indicate if the input signal is saturating (over-amplifying).
The L & R outputs available on the front panel are the module outputs, with the signal ready to be used in your modular system. -
Buffered Multiples
It allows the division of an incoming signal without voltage drop. CAIXA has 2 multiples in 1 to 3 configuration. You can use them independently or normalized. The input of the second row is normalized to the input of the first row. -
Precision Adder
The X and Y inputs are summed to the switch voltage [-2 to +5V], both outputs receive the sum.
It is a very versatile utility that can do a lot of different tasks, for example:
Transpose the octaves of the VCOs, change the CV offset, precisely sum the CV…. Just find out the best use you can make of it. -
2 LFOs
Two basic low-frequency oscillators with a frequency adjustment knob and outputs for triangular and square waves.
The square output of LFO1 is normalized to the S&H trigger input. -
Sample & Hold
On each trigger, the output voltage takes the value of the input voltage and holds this voltage at the output.
There is also a white noise output that you can patch wherever you want.
TRIG. Input trigger, normalized to the square output of LFO1.
IN. Input signal, the one to be “sliced”.
NOISE is normalized to this input.
NOISE. White noise output. It can be used outside the S&H circuit.
OUT. Output of the sample & hold circuit. -
Stereo Mixer
CAIXA has a 2 channel stereo mixer with 2x gain. This means you can push your signals to higher voltage levels if you need to.
1L, 2L. Channel 1/2 Left signal, normalized to the right signal.
1R,2R. Channel 1/2, right signal.
MIX L. Output channel L
MIX R. Output channel R -
Stereo & Headphone Out
Send a stereo signal into the L&R jacks and you will have it available on phones and impedance balanced outputs. It has a gain adjustment (+6dB) for each output.
The Stereo Mixer outputs are normalized to the Stereo & Headphone Output’s inputs, which means you don’t need to use additional cables if you want to connect them.
Compliance
This device complies to the EU guidelines and is manufactured RoHS conforming
without use of led, mercury, cadmium and chrome. Nevertheless, this device is
special waste and disposal in household waste is not recommended.
This device meets the requirements of the following standards and directives:
- EMC: 2014/30/EU
- EN 55032. Electromagnetic compatibility of multimedia equipment.
- EN 55103-2. Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use.
- EN 61000-3-2. Limits for harmonic current emissions.
- EN 61000-3-3. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems.
- EN 62311. Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields.
- RoHS2: 2011/65/EU
- WEEE: 2012/19/EU
Guarantee
This product is covered by 2 years of guarantee on purchased goods, which
begins when you receive your package.
-
This guarantee covers
Any defect in the manufacturing of this product.
Replacement or repair, as decided by NANO Modules. -
This guarantee does not cover
Any damage or malfunction caused by incorrect use , such as, but not limited to:
– Power cables connected backwards.
– Excessive voltage levels.
– Unauthorized mods.
– Exposure to extreme temperature or moisture levels.
Please contact our customer service – jorge@nanomodul.es – for a return authorization before sending the module. The cost of sending a module back for servicing is paid for by the customer.
Technical Specifications
-
Power Specs
30.7W Integrated switching power supply with
Meanwell 60W power brick.
+12V output at 1.25A
-12V output at 1.1A
+5V output at 0.5A -
Construction
Dimensions 535 x 200 x 86 mm
Materials Anodized aluminum
Aluminum extruded rails with steel threaded inserts
Rubber feet to protect your desktop.
Contact
Bravo!
You have learned the basic fundamentals of your CAIXA 104.
If you have any doubts, please feel free to contact us.
nano-modules.com/contact
Busboard
- The leftmost slot is connected to the power supply.
- Connect your modules in the remaining18 slots.
Module Depth
The maximum module depth above the busboard connectors is 47mm, but you can
place modules up to 60mm outside of the busboard space.
That should be sufficient to fit the vast majority of modules out there.
NANO Modules – València 2022 ©
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>