Rondell RDE-1107 Coffee Machine Instruction Manual

: June 12, 2024
: Rondell

Rondell RDE 1107 Coffee Machine - Cover

Instruction Manual
RDE-1107

RDE-1107 Coffee Machine

Rondell RDE 1107 Coffee Machine - Product Overview 1

Rondell RDE 1107 Coffee Machine - Product Overview 2

COFFEE MACHINE AUTOMATIC
RDE-1107
www.rondell.ru

AUTOMATIC COFFEE MACHINE RDE-1107
The coffee machine is intended for making coffee:
Espresso, Americano, Cappuccino, Latte, as well as Hot Milk and Hot Water.

Description

1. Removable drip tray
2. Adjustable coffee spout
3. Milk system inlet
4. Water tank
5. Water compartment door
6. Power cord
7. Control panel
8. Coffee grinder lid
9. Ground coffee funnel| 10. Coffee bean container
11. Brewing unit door
12. Brewing unit
13. Used coffee grounds container
14. Grinding degree control knob
15. Milk supply knob
16. ON button
17. Cup warming tray
---|---

Control panel (7)

18. LED display
19. Cappuccino/Down button
20. Latte button
21. Hot milk button
22. Menu/Exit/Ground coffee button| 23. Two Cups/Enter button
24. Hot water button
25. Americano button
26. Espresso/Up button
---|---

ATTENTION!
For additional safety protection of the power circuit, in-stalling a residual current device (RCD) with the tripping sensitivity below 30 mA is recommended. To install the RCD contact an expert.

OPERATION AND SAFETY RECOMMENDATIONS

Read this user manual thoroughly before using the unit.
Keep this manual for the entire usage period.
Mishandling the unit can cause it to break, harm the user or damage their property.
Before switching the unit on make sure that the operating voltage of the coffee machine corresponds to the mains voltage.
The power cord is equipped with a «Euro-plug»; use it with a socket that has a reliable grounding connection.
To avoid fire, do not use adapters for connecting the coffee machine to the mains.
Only use the coffee machine for its intended purpose.
Do not use the unit outdoors.
Never leave, or keep the coffee machine in places with the temperature below 0°C.
Place the coffee machine on a dry stable even surface; do not place the unit on the edge of the table.
Do not place the coffee machine on hot surfaces.
Keep the coffee machine out of direct sunlight.
Do not use the coffee machine near heat and moisture sources or near open flame.
When installing the coffee machine, leave a free space of 10 cm on each side of the unit to ensure its effective cooling.
Do not let the power cord hang from the edge of the table and make sure it does not touch hot surfaces or sharp edges of furniture.
Be careful while handling hot water.
To avoid electric shock, do not immerse the coffee machine, its power cord or power plug into water or other liquids.
To avoid injury, keep your hands away from moving parts of the unit, such as the coffee grinder and brewing unit, during operation.
Do not move the coffee machine or remove protective elements (e.g. do not open the right door) while making drinks or washing.
Use only the accessories supplied.
Do not switch the coffee machine on if it is empty.
Use only clean cold water, water additionally cleansed through domestic water filters is recommended.
Before switching the coffee machine on, make sure that all removable parts are installed properly.
Never leave the coffee machine unattended when switched on.
Do not touch the power cord, the plug, or the coffee machine body with wet hands.
To avoid burns, do not touch hot surfaces of the coffee machine (adjustable coffee spout, boiler) during coffee making or right after switching the unit off. The surface of the heating element remains hot after use.
Let the unit cool down completely before cleaning it or removing the accessories.
Do not remove the adjustable coffee spout or the brewing unit during coffee machine operation.
Unplug the coffee machine before cleaning or when you are not using it.
When unplugging the unit, pull the plug but not the cord.
Do not switch off or unplug the unit while making drinks or cleaning the system.
For children safety do not leave polyethylene bags used for packaging unattended.
Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
This unit is not intended for usage by children.
Place the unit out of reach of children during operation and cooling down.
Do not allow children to touch the unit body or the power cord during operation.
The unit is not intended to be used by people with physical, sensory or mental disabilities (including children) or by persons lacking experience or knowledge if they are not under the supervision of a person who is responsible for their safety or if they are not instructed by this person on the usage of the unit.
Do not leave children unattended to avoid them using the unit as a toy.
Do not use the unit if the coffee machine body, the power cord or the power plug is damaged.
In order to avoid liquid getting on the electrical connector, in the event of any malfunction or if the unit has been dropped, unplug the unit from the mains and contact any authorized service center.
If the power cord is damaged, it should be replaced by the manufacturer, a maintenance service, or similar qualified personnel to avoid potential injury.
To avoid potential injury, do not attempt to repair the unit yourself. Do not disassemble the unit by yourself, if any malfunction is detected or after it was dropped, unplug the unit and apply to any authorized service center from the contact address list given in the warranty certificate and on the website www.rondell.ru.
Transport the unit in the original packaging only.
Keep the unit in a dry cool place out of reach of children and disabled persons.

THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
COMMERCIAL USAGE AND USAGE IN PRODUCTION AREAS AND WORK SPACES IS PROHIBITED.

BEFORE THE FIRST USE

After unit transportation or storage at low temperature keep it for at least three hours at room temperature before switching on.

Take the coffee machine out of its packaging and remove the packaging materials.
Check the unit integrity; do not use the unit in case of damage.
Make sure that the operating voltage of the coffee machine corresponds to the mains voltage.
Before using the coffee machine for the first time, wash all removable parts (1, 4, 12, 13) with warm water and neutral detergent and dry them.

OPERATION PREPARATION

Read this manual before using the unit for the first time and keep it for the entire time you use the coffee machine.

Check to make sure that the brewing unit (12), used coffee grounds container (13), and drip tray (1) are properly installed.
Fill the tank (4) with clean water.

Notes: The tank (4) can be filled only with clean water at room temperature. Do not fill it with hot or ice water and milk. Failure to comply with this requirement will cause the tank to crack and damage the unit.

Add coffee beans (more than 30 g) to the bean container (10) before first use.

Notes: The Container (10) is only intended for coffee beans, do not add water, ground coffee, or coffee beans mixed with dense particles to avoid damaging the coffee grinder blades.

UNIT OPERATION

Switching the coffee machine on/off
Plug the unit into the mains (fig. 2).
Press the ON button (16) on the front panel of the unit (fig. 3).
When switched on, the coffee machine runs a self-diag-nosis and automatic washing.

When the above processes are completed, the machine will be ready for use.
To switch the coffee machine off and put it into standby mode, press and hold the button (16) for 4 seconds, which will start the washing mode.

MAKING DRINKS

Place a cup under the adjustable coffee spout (2) of the coffee machine and adjust its height (fig. 4).
Press one of the buttons to make the type of drink you need:
Espresso (26), Americano (25), Hot water (24) (fig. 5).
The preparation process will end automatically when the coffee machine has made the programmed amount of drink.
To get a double portion of the drink, press the «Double portion»/«Enter» button (23) before the cooking process is completed.
To interrupt the process of making a drink, press the «Exit» button (22).
After finishing the process of making a drink, take the cup with the drink away .

Notes:

The supply of hot water will stop automatically when its volume in the mug reaches 250 ml. To interrupt the hot water supply process, press the «Exit» button (22).
Warm the cups that you want to use first; to do this, place the cups on the cup warming tray (17), while water is heated in the boiler, the tray (17) heats up too, thus warming the cups.

Changing settings while making a drink

To adjust the coffee strength, while grinding coffee beans, press the buttons (19) and (26) to change the amount of ground coffee (9-11 g) that will be used to make the drink. The display will then show the progress of changing the corresponding setting.
To set the volume of the drink, use the buttons (19) and (26) to change the amount of water supply (20-250 ml) when the coffee machine starts dispensing liquid into the mug. The display will then show the progress of changing the corresponding setting.

MAKING CAPPUCCINO/LATTE/HOT MILK

Place a cup under the adjustable coffee spout (2). Place the milk supply tube on the milk system inlet (3) of the adjustable coffee spout (2) and adjust its height (fig. 6).
Dip the tube into the milk container (fig. 7).
To make the type of Cappuccino/Latte/Hot milk you want, press one of the buttons: Cappuccino (19), Latte (20), Hot milk (21) (fig. 5).
The drink making process will end automatically when the coffee machine has made the programmed amount of drink. You can press the «Exit» button (22) to stop the drink making process.

MAKING DRINKS FROM GROUND COFFEE

Add 2 coffee spoons (10 g) to the ground coffee funnel (9).

ATTENTION! The amount of ground coffee to be added should not exceed 2 spoons, the spoon is supplied with the unit. Otherwise, the coffee powder will spill out of the brewing unit, causing it to clog and damage.

Press the button (22) . You will hear a sound and the symbol will appear on the display.
Press the button for the selected drink type.
The drink making process will end automatically.

Below is the table on making drinks:

Drink name| Ground beans
weight, g| Ready drink
amount, ml| Frothed milk, sec| Temperature, °C| Hot water, ml
---|---|---|---|---|---
Espresso
One cup/two cups| 9-11| 20-250| –| 75-95| –
Default| 10| 40| –| 90| –
Americano
One cup/two cups| 9-11| 20-250| –| 75-95| 20-250
Default| 10| 60| –| 90| 80
**Cappuccino*
One cup/two cups| 9-11| 20-250| 10-60| 75-95| –
Default| 10| 40| 30| 90| –
Latte****
One cup/two cups| 9-11| 20-250| 10-60| 75-95| –
Default| 10| 40| 30| 90| –

Milk is dispensed first, then espresso
** Espresso is dispensed first, then milk

FUNCTION CAPABILITIES

Grinding degree control
Adjust the grinding degree (from 1 to 5) of the coffee beans while the coffee grinder is running (fig. 1).
If you turn the knob (14) counterclockwise, the grind size will be finer and the taste of coffee will be stronger.
If you turn the knob (14) clockwise, the grind size will be coarse and the taste of coffee will be weak.

ATTENTION! The coffee grinder should only be adjusted while the coffee grinder is in operation. Failure to do so may result in unit damage.

Frothed milk control

The milk supply knob (15) is located on the left side of the coffee machine, behind the door (5).
For thick frothed milk, turn the knob (15) counterclockwise (fig. 8).
For hot milk, turn the knob (15) clockwise (fig. 8).

Beverage temperature control

To adjust the beverage temperature settings, press the «Menu» button (22) for 4 seconds.
Next, press the «Menu» button (22) again until the preset beverage temperature parameters, 90 °С, appear on the display.
Set the water temperature from 75 to 95 °С by pressing the «Up» (26) or «Down» (19) buttons. Press the «Menu» button (22).

Resetting the coffee machine

To reset the coffee machine to factory settings, press the «Menu» button (22) for 4 seconds.
Then briefly press the «Menu» button (22) 4 times until «INIT» appears on the display.
Then press and hold the «Enter» button (23) for 4 seconds.
Press the «Menu» button (22) to complete the reset process.

Drip tray (1)
When the level of the drained liquid rises to the upper limit, the float water level indicator rises, after which it is required to drain the liquid from the drip tray.

Brewing unit (12)
Please do not open the door (11) or move the brewing unit (12) during coffee making. If the display (18) shows «No brewing unit» , please remove it and then reinsert it into its place until it clicks.

Used coffee grounds container (13)
When the symbol appears on the display, please empty the container (13).

CLEANING AND MAINTENANCE

Washing the milk supply system
After each drink with milk, it is necessary to clean the coffee machine from its residues.

Place a container to drain the liquid.
Place the milk supply tube on the coffee spout and adjust its height (fig. 6).
Put the tube in a container with clean water (fig. 7).
Press the «Hot milk» button (21).
Repeat the procedure until the milk tube is completely clean.

Notes: We recommend washing the milk system after each use.

Cleaning the brewing unit

Remove the brewing unit (12) from the coffee machine after removing the used coffee grounds container (13) as shown in figures (11) and (12).
Soak the brewing unit in a container with clean water and rinse it thoroughly or wash it under running water.
Place the brewing unit (12) in the coffee machine slot, then install the brewing grounds container (13).

Notes: We recommend cleaning the brewing unit once a month.

Cleaning from scale (decalcification)
To prolong the life of the coffee machine, it is critical to clean the unit from scale in a timely manner. The descaling frequency depends on water hardness in your region. To determine the level, we recommend using paper indicator testers that are immersed in water and change color depending on the amount of calcium, magnesium and iron. Based on the data obtained, it is necessary to choose one of the following decalcification frequency schemes:

Level| Water hardness, mg/l| Descale after
(number of cups)
---|---|---
Level 1| 0-50| 880
Level 2| 51-120| 440
Level 3| 151-250| 280
Level 4| 251-425| 220

You can use calcium powder or tablets that are designed for automatic coffee machines and other food and drink making devices as a cleaning agent.

Make the descaling solution according to the cleaning agent instructions.
Fill the water tank (4) with the prepared solution up to the maximum mark and place it in the coffee machine (fig. 9).
Place a suitable container (at least 1.5 l) under the coffee spout.
Press the «Menu» button (22) for 5 seconds until the «Washing» symbol appears on the display.
Press «Enter» button (23) to start the cleaning process.
When the water system has been cleaned with the descaling solution, you will hear a sound signal and the symbol will appear on the display.
Remove the water tank (4) from the coffee machine, wash it and fill it with clean water.
Insert the water tank (4) into the coffee machine and wait for the cleaning process to finish.

Cleaning the coffee grinder

Unplug the unit
Open the coffee bean compartment lid and clean the inside with a dry soft cloth.

ATTENTION! Do not use water or sharp objects to clean the coffee grinder

Replacing sealing rings
The delivery set includes a set of sealing rings for the heating block.
Rings must be replaced if they are worn or damaged.

ATTENTION! Replacement should be carried out when the unit is unplugged.

Open the brewing unit door (11) (fig. 10).
Remove the used coffee grounds container (13) (fig. 11).
Remove the brewing unit (12) (fig. 12).
Clean the brewing unit by immersing it in a container with clean water for 30-40 minutes.
Replace the sealing rings on the brewing unit according to figures 13-15.

Troubleshooting

Malfunction	Possible reason	Solution
The coffee machine does not switch on	The unit is unplugged from the mains

Plug the coffee machine into the mains
The unit is in the sleep mode| Touch the ON button on the front panel
The coffee grinder is making odd noises| The coffee grinder is clogged| Clean the coffee grinder according to this guide
There are foreign objects caught up in the coffee grinder| Unplug the coffee maker, remove foreign objects from the coffee grinder and wipe it with a dry cloth.
The coffee grinder doesn’t work| The coffee grinder motor has broken| Contact the service center
There are foreign objects caught up in the coffee grinder| Unplug the coffee maker, remove foreign objects from the coffee grinder and wipe it with a dry cloth.
Liquid is slowly leaking from the coffee spout| The grind is too fine| Adjust the grinding by setting it to less fine grind
The brewing unit is clogged up| Clean the brewing unit following the guide
Instead of coffee water drips from the coffee supply block| Coffee beans are not sufficiently ground| Adjust the coffee grinder settings to <+>
Coffee beans are wet| Replace the coffee beans with well-dried ones
The coffee machine dis- plays a notification that there is no brewing unit although it is installed in the machine body| The brewing unit has been inserted incorrectly| Check the brewing unit and reinsert it in accordance with this guide
The coffee spout produces too little coffee| The water supply system is clogged with the residual scales| Descale the coffee machine in accordance with this guide
The milk is not frothing| The milk frother is clogged| Fully clean the milk system and milk tubes.
The milk frother has been installed incorrectly| Check the milk frother and reinstall it in accordance with this guide
The frothed milk control knob (15) is set to the position «Hot milk.| Turn the control knob ( 15) counterclockwise to the position «Frothed milk.
The milk is not frothing| This type of milk is not suitable for frothing| For best results, use whole milk
Milk is not flowing into the frothing and supply system| The frothing and supply system is blocked| Clean the frothing and supply system fully following this guide
The milk supply pipe is installed improperly| Re-check the installation of the milk supply pipe, it
must be tightly fitted to the inlet of the milk system
The coffee maker display shows the message that the used coffee grounds container is not installed, though it is installed to its place| The coffee grounds container sensor is blocked| Remove the used coffee grounds container and thoroughly clean all corners of the container area with the soft brush supplied with the unit, and clean all outer corners of the container with a dry cloth.
The display shows the icon ..Water tank.| The water tank is empty| Fill the water tank with clean water and install it into the socket behind the left door of the coffee maker and press until clicking
The display shows the icon «Water tank»| The water level sensor requires calibration| While the coffee maker is in the standby mode, perform the following actions: 1) Remove the water tank from the coffee machine socket; 2) Remove the sticker from the water level sensor reset button, it is located in the corner of the water tank socket;
3) Press the reset button for more than 6 seconds;
4) Unplug the coffee machine from the mains;
5) Connect the coffee machine to the mains and switch it on after 10 seconds; 6) Fill the water tank and place it in the socket behind the coffee machine left door, press on it until bumping
The display shows a square-shaped running line. After you press the button “Exit. (22), the drink is not poured in the cup| The water tank is installed improperly| Fill the water tank and place it in the socket behind the coffee machine left door, press on it until bumping
Water does not get in the water supply pipe| Contact the service center
The water supply pipe is blocked| Contact the service center
The brewed coffee is too weak (watery)| The grind is too fine| Adjust the grinding by setting it to less fine grind
Dark roasted coffee is used for preparing drinks, which releases more coffee oil, the grinder knives become sticky, the beans do not enter the coffee machine| During the coffee maker operation turn the control knob to the direction of Gi-.. If the problem remains, contact the service center.
Wet coffee has blocked the coffee maker operation| Remove wet coffee beans, clean the coffee bean container and add dry coffee beans
Coffee is not poured into the cup| The water tank is installed improperly| Fill the water tank and place it in the socket behind the coffee machine left door, press on it until bumping
The filter on the piston of the brewing unit (12) is clogged| Clean the brewing unit following the guide, thoroughly clean the filter on the brewing unit piston or apply to the service center.
Water supply pipes for making coffee are blocked| Perform the decalcination following this guide. If the problem remains, contact the service center.

STORAGE

Before taking the unit away for storage, unplug it and let the unit cool down completely.
Clean the unit.
Do not leave, use and keep the unit in places with the temperature below 0°C.
Keep the unit in a dry cool place out of reach of children and handicapped persons.

TRANSPORTATION

Keep the original packaging of the coffee machine for safe transportation.
Remove all water from the coffee machine container and its internal parts, wipe it dry with a soft cloth.

DELIVERY SET

Coffee Machine – 1 pc.
Milk supply tube – 1pc.
Stainless steel platform for heating cups – 1 pc.
Measuring spoon for coffee (for 5 g) – 1 pc.
Metal brush for cleaning the milk supply system – 1 pc.
Soft brush for cleaning the brewing unit – 1 pc.
A set of spare silicone rings for the brewing unit – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Rated input power: 1100-1350 W
Water tank capacity: 1,6 L

RECYCLING

For environment protection do not throw out the unit and the batteries (if included), do not discard the unit and the batteries with usual household waste after the service life expiration; apply to specialized centers for further recycling. The waste generated during the disposal of the unit is subject to mandatory collection and consequent disposal in the prescribed manner.

For further information about recycling of this product apply to a local municipal administration, a disposal service or to the shop where you purchased this product.

Unit operating life is 3 years
The manufacturer preserves the right to change design, structure and specifications not affecting general principles of the unit operation without a preliminary notification due to which insignificant differences between the manual and product may be observed. If the user reveals such differences, please report them via e-mail info@rondell.ru for receipt of an updated manual.

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

****This product conforms to the EMC Directive 2014/30/EU and to the Low Voltage Directive 2014/35/EU.

Dear Customer!
RÖNDELL appreciates your choice and guaranties the high quality of the purchased appliance operation under keeping of service rules.
The guarantee period for all devices is 12 months from the date of purchase. By this guarantee book the manufacturer confirms the good working condition of the device and undertakes the obligation to repair any defects which may arise through the fault of the manufacturer free of charge. Warranty service is available at any authorized serviсe center enlisted on the site www.rondell.ru.

Guarantee service conditions

The guarantee is valid if the following issuance conditions are observed:
• correct and precise filling in the original RÖNDELL warranty card with mentioning model name, its serial number, date of sale, with seal of Seller and signature of Seller’s representative in the warranty card, seals on each tear-off coupon, Buyer’s signature; The manufacturer retains the right to refuse guarantee service in case of failure to submit the above-mentioned documents, or if the information they contain is incomplete, illegible or contradictory.
The guarantee is valid if the following operating conditions are observed:
• the device is used in strict accordance with the operating instructions;
• the safety rules and requirements are observed.
Warranty does not include periodic maintenance, cleaning, installation, adjustment of device at the owner’s home, as well as natural device wear and tear.
Cases not covered by the guarantee:
• mechanical impairments;
• non-observance of operating conditions or faulty action of the owner;
• incorrect installation or transportation;
• natural hazards (lightning, fire, flooding etc.), as well as other causes beyond the control of the seller and manufacturer;
• penetration of external objects, liquids or insects into the device;
• repair work or structural alterations carried out by unauthorized persons;
• use of the device for professional purposes (whereby the load exceeds the domestic application level);
• connection of the device to power supply, telecommunication and cable-based networks incompatible with the State Technical Standards;
• cleaning of audio heads, different media readout drives
• breakdown of the accessories of the unit listed below, if their replacement is specified by the construction and does not require disassembly of the unit:
а) the remote control, the accumulator batteries, batteries, external power blocks and charging devices;
b) the consumable products and accessories (packing, cases, belts, bags, grids, blades, flasks, plates, supports, racks, roasting racks, hoses, tubes, brushes, attachments, dust containers, filters, odor absorbers).
• for battery-operated devices: use of incompatible or discharged batteries, or any impairments caused by discharged or leaky batteries (we recommend to use only high-quality batteries);
• for battery powered devices – any damages coursed by battery charging and recharging rules violation.
• for shavers: crumpled or ruptured safety mesh;
This guarantee is provided by the manufacturer in addition to the customer’s rights, stipulated by the current legislation, and does not restrict them.
The manufacturer is not responsible for possible harm, caused directly or indirectly by «RÖNDELL» products to people, pets, consumer’s property and/or other third parties in case if it has happened due to violation of rules and operating conditions, installation of the unit; intended and/or careless actions (inactions) of a consumer and/or other third parties, the effect of force majeure circumstances.

Purchase information
Model: ____
Serial №: __
Date of purchase:_____

Seller information
Name and address of selling organization: _____
Telephone number: ____
Here by I confirm the receipt of the guarantee terms

Buyer’s signature ____
ATTENTION! The guarantee card is valid only if stamped by the selling organization

Coupon №3	Coupon №2	Coupon №1
463-	463-	463-
Model: RDE-1107	Model: RDE-1107	Model: RDE-1107
Serial №: ____	Serial №: ____	Serial №: ____
Repair start date: ___	Repair start date: ___	Repair start date: