VEVOR 2T Folding Type Hydraulic Auto Mobile Engine Hanging Machine Instructions
- June 12, 2024
- VEVOR
Table of Contents
VEVOR 2T Folding Type Hydraulic Auto Mobile Engine Hanging Machine
The maximum load is less than or equal to 2000kg
Product Information
The product is a 2T folding type hydraulic automobile engine hanging machine. It is designed for lifting heavy objects with a maximum load of 2000kg. The machine comes with various components including a base, bolt hole, universal wheels, folding leg, column, pull plate, lifting arm, hook, jack, hand press bar, and various nuts and screws.
Product Usage Instructions
Warning
- The machine should be placed on a solid and level surface to prevent overloading.
Lifting
- Hook the crane hook to the lifting objects and secure the rope to prevent sliding.
- Use the handle to tighten the pressure relief valve in a clockwise direction.
- Place the crane hook in the correct position and operate the handle to lift the objects to the desired height.
Decline
- Rotate the handle counterclockwise to open the pressure relief valve.
- Allow the lifting object to steadily decline. Avoid rotating the release valve for more than half a circle.
Discharging Air in the Hydraulic System
- Remove the oil hole oil plug to let air out.
- Loosen the release valve and quickly move the handle up and down several times.
Attention: Air may enter the hydraulic system during transportation or use. It is important to discharge the air to ensure normal operation of the jack.
Use matters needing attention
Lifting
- The crane hook in lifting objects, Hook the rope, To prevent the sliding of lifting objects.
- Use the handle to tighten the pressure relief valve in a clockwise direction.
- The crane hook should be placed in the correct position, Up and down the operating handle, and rose to the desired height.
Decline
A rotating handle with a slow counterclockwise direction, To open the pressure relief valve, lifting thing’s steady decline, release valve rotation is generally not more than half a circle.
Matters needing attention
- Air in the process of transportation or use will enter the hydraulic system and affect the normal use of the jack,So the air should be discharged.
Discharge air in the hydraulic system
- Remove the oil hole oil plug to let air out.
- Loosen release valve,Quick to suppress the handle up and down several times.
Accessories table
| Component table | Standard parts list | |
|---|---|---|
| number | name | number |
| 01 | base | 0ne |
M16*90mmnuts
| Two
Two
03| Bolt hole| Four| | 04| M8x*16mm
Squarehead screws
| Twenty-four
05| 4inch universal
wheel
| Four| | 07| M8*15MM Flat
head screws
| 0ne
06| 3inch universal
wheel
| Two| | 09| M16x90nuts| Two
08| Folding leg| Two| | 12| M16100mm nuts| One
10| Column| 0ne| | 14| M16 * 100 mm screw| One
11| Pull plate| Two| | 15| M16nut| eight
13| Lifting arm
M16 * 80 mm screw
| One
One
| | 17
18
| M16*80nuts
M16 nut
| One
One
19| a hook| One| | 20| M12*70mm nuts| 0ne
21| 8 ton jack| One| | 22| M16 nut| Two
23| Hand press bar| 0ne| | | |
Warning
- The resurgence of the heavy weight lifting machines should be placed on a solid level of the cane on the ground; overloading is strictly prohibited.
Maintain
- One. Refueling: Place the jack in the lowest position, and take off the oil plug, the oil liquid should be about 8 mm from the oil hole liquid, then install the oil plug.
- Two. Lubrication: Every three months to support the shaft and a link shaft lubricating oil boom.
- Three. Rustproof: Wipe the rust sports with a tarpaulin, Hoisting machine is not applicable, should be the jack in the lowest position.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>