JAMARA Future Heat sealing iron III Instructions

: June 5, 2024
: JAMARA

Table of Contents

General information
Box contents
Features
Using the Iron
LED Indicator:
Safety and operating instructions
Disposal restrictions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Instruction
Future Iron III
No. 172145
**Folienbügeleisen Heat sealing iron

**

General information

Jamara e.K. is not liable for any damage caused to the product itself or by it, if this is due to improper operation or handling errors. The customer alone bears full responsibility for the proper use and handling, including in particular, assembling, charging, and using the model, and selecting the area in which to use it. Please refer to the operating and user instructions, which contain important information and warnings.
Certificate of Conformity
Hereby JAMARA e.K. declares that the product “Heat sealing iron Future Iron III, No. 172145” complies with Directive 2014/30/EU, 2011/65EU, 2014/35/EU. The full text of the EU Declaration of Conformity is available at the following Internet address: www.jamara-shop.com/Conformity

Read the complete instructions and security instructions carefully before using the model.
Caution! Please fully and carefully read warnings/ safety instructions. These are for our own security and can avoid accidents/injuries.

Box contents

Heat sealing iron Future Iron III
Stand for heat sealing iron
Sock for heat sealing iron
Instructions

Features

Coated, suitable for all types of iron-on covering foils; temperatures infinitely variable; its special shape makes it easy to use even for difficult fto reach positions.

Using the Iron

Please ensure again if the iron sock has been put into the shoe before using. First, put the iron sock into the shoe and place the iron on the medal stand. Then, place it on the thermal insulation or poor thermal conductivity surface (ex. Flagstone, glass table, etc.)
Plug the AC power cord to the proper wall outlet, and the green and red LED (1 & 2)starts to light on. Turn the knob to set the temperature [Range: 100°C to 220°C (212°F to 428°F)].
During the preheating process, the red LED (2) is lit solidly. Before the iron has reached the temperature, the red LED starts flashing, is always faster and weaker. When the temperature is reached, the red LED goes out.
Adjust and test the temperature by turning the temperature knob slowly till the covering material sticks to the balsa wood smoothly.
The sealing iron has auto security cut-off function. It will shut down when leave unused for over 6 hours.

LED Indicator:

green =the iron is ready for use
permanently red = ist im Aufheizungs-Prozess.
Rot blinkt =die gewünschte Temperatur ist fast erreicht.
Rot erlischt =die Temperatur ist erreicht.

Temperature Settings
Please refer to the temperature recommended by the foil manufacturer.
If the manufacturer has included no recommendations for the use of the foil, you can refer to the following guidelines.

At approx. 100°C the bonding part of the foil will start to glue to the model.
At approx. 130°C the foil will stick to the model
At approx. 150°C the foil can shrink
At approx. 250°C the foil will start to melt and will be unusable

Attention! We can not guarantee success with the above-mentioned temperatures.
All rights reserved. Copyright JAMARA e.K. 2022 Copying or reproduction in whole or part, only with the expressed permission of JAMARA e.K.

Safety and operating instructions

Never leave the sealing iron unattended during operation.
Always place the iron on the supplied stand during operation. Through the temperature, your furniture might otherwise be damaged.
Make absolutely sure no combustible materials (eg, paper, etc.) is placed near the iron. Risk of fire!
Make sure that no children or pets are near the heated iron. Risk of injury! NEVER use the iron for ironing clothes. The high temperatures is not suitable and would damage your clothes.
Avoid any contact with the ironing surface of the iron.
Do not use in case the iron is dropped or it is obviously damaged.
Switch the iron OFF (0) after use. Otherwise, the iron will switch on immediately once you connect it to the wall socket.
Always disconnect the iron from the mains when not in use.
This product is not intended for use by individuals (including children) with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge unless they are supervised by a person responsible for their safety and have been given instructions about how the product should be used.
Must always be kept away from children.

Disposal restrictions

Electrical appliances must not be disposed of in domestic waste and must be disposed of separately. You are obliged to take out the batteries, if possible, and to dispose of the electrical equipment at the communal collection points. Should personal data be stored on the electrical appliance you must remove them by yourself.

Service center
JAMARA e.K.
Inh. Manuel Natterer
Am Lauerbühl 5 – DE-88317 Aichstetten
Tel. +49 (0) 75 65/94 12-0
Fax +49 (0) 75 65/94 12-23
info@jamara.com
www.jamara.com
Service – Tel. +49 (0) 75 65/94 12-777
service@jamara.com