Alecto DVM-275C Aanmelden Camera Instruction Manual
- June 12, 2024
- Alecto
Table of Contents
Alecto DVM-275C Aanmelden Camera
Product Information
- Product Name: DVM-275C
- Model Identifier: CYHA050150VWEU
- Manufacturer: Shenzhen Guanjin Technology Co., LTD
- Manufacturer Address: Building 8, Qiaoxin garden, No.33, Hexin South Road, Guangming street, Guangming District, Shenzhen, China
- Power Adapter Information:
- Input voltage: 100-240VAC
- Input AC frequency: 50/60 Hz
- Camera Specifications:
- Frequency: 2407 MHz – 2475 MHz
- Modulation: FSK
- RF Output: [Not specified]
Product Usage Instructions
- Make sure the camera is properly connected to the power adapter.
- Plug the power adapter into a power outlet with a voltage range of 100-240VAC and an AC frequency of 50/60 Hz.
- Ensure that the camera is registered and ready for operation.
- Follow the manufacturer’s instructions to connect the camera to your desired device or network.
- Refer to the user manual for further instructions on camera functionality and settings.
Please note that specific instructions on camera registration and connectivity may vary. For detailed information, consult the user manual provided with the product.
REGISTERING CAMERA
- Connect the power adaptor of the new camera (baby unit) and insert the adapter into a 230V wall outlet; check whether the indicator underneath the button illuminates.
- Open the menu on the parent unit, select the ‘Settings’ option, press the OK button and then select ‘Camera’. Press the OK button.
- Use the or navigation button to add a new camera (‘Add Camera’ column) and press the OK button.
- The parent unit now starts a countdown from 30 to 0, within these 30 seconds briefly press the PAIR button at the bottom of the new baby unit. After several seconds the parent unit and the new baby unit will detect each other and the view of the new baby unit is immediately shown on the screen of the parent unit.
The camera is now registered and ready for use.
SPECIFICATION
Information Power Adapter
- Manufacturers name and address: Shenzhen Guanjin Technology Co., LTD, Building 8, Qiaoxin garden, No.33, Hexin South Road, Guangming street, Guangming District, Shenzhen, China
- Model Identifier: CYHA050150VWEU
- Input voltage: 100-240VAC
- Input AC frequency: 50/60 Hz
- Frequency: 2407 MHz – 2475 MHz
- Modulation: FSK
- RF Output: <20dBm
- Output voltage: 5.0V DC
- Output current: 1.5 A
- Output Power: 7.5 W
- Average active efficiency: 77.0 %
- Efficiency at low 10% load: –
- No load Power consumption: 0.076 W
DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type Alecto DVM-275 is in
compliance with directive 2014/53/EU. The full text of the EU Declaration of
conformity is available at the following internet address:
http://DOC.hesdo.com/DVM-275-DOC.pdf
Use of this equipment is allowed in all countries of the EU. In France, Italy,
Russia and Ukraine, only indoor use is allowed.
WWW.ALECTO.NL
SERVICE@ALECTO.NL
Commaxx B.V., Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>