Electrolux EKM3000 Kitchen Machine Instruction Manual
- June 4, 2024
- Electrolux
Table of Contents
Instruction Book
EKM3xxx
Kitchen Machine
EKM3000 Kitchen Machine
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious
and stylish, it has been designed with you in mind. So whenever you use it,
you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website to:
| Get usage advice, brochures, trouble shooter, and service information: at
www.electrolux.com
---|---
| Register your product for better service:
www.electrolux.com/productregistration
| Buy accessories and consumables for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
When contacting Service, ensure that you have the following data available:
– Model Number
– PNC number
– Serial number
The information can be found on the rating plate.
Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux accessories and spare parts. They have been designed especially for your product. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Motorhead (tiltable)
B. Speed selector
C. Housing
D. Tilt head locking button
E. Front attachment hub
F. Front attachment hub release button
G. Rear attachment hub cover
H. Attachment shaft
I. Stainless steel bowl
J. Bowl locking plate
K. Non-slip feet| L. Power cord
M. Wire whip
N. Coated flat beater
O. Coated dough hook
P. Slicer/Shredder
Q. Meat grinder
R. Blender
S. Blender lid with measuring cup
T. Transparent pouring shield
U. Transparent chute
- Certain models only
---|---
GETTING STARTED
-
Before using your appliance for the first time: Remove all packing material such as plastics, labels, stickers, or tags that may be attached to the housing, bowls, or attachments. Clean the appliance and accessories, see instructions: “Cleaning and Care”.
-
Place the appliance on a flat surface. Push the tilt head locking button with one hand and tilt the motor head up with the other hand. Once in the up position, it locks.
Caution! Ensure that the power cord is unplugged. -
Set the speed selector to “0”. Place the stainless steel bowl on the bowl locking plate. Rotate the bowl clockwise to lock it into position.
Warning: Never operate the appliance with the wire whip, flat beater, or dough hook unless the bowl is in place. -
Place an attachment on the attachment shaft : Align the slot at the top of the attachment with the pin on the attachment shaft. Push the attachment up and turn it clockwise until the pin is locked into position.
To remove the attachment, move it counterclockwise and pull it off. -
Tilt the head with the attachment to lock it into position: Push the tilt head locking button with one hand and tilt the motor head down with the other hand. Insert the plug in the main socket. Place the pouring shield on top of the bowl by making the tool pass through the opening of the pouring shield. Rotate the pouring shield to suit the preferred position of use. Use the chute to reduce the spillage of ingredients. Connect the chute to the pouring shield using the hooks on the chute.
Warning: Keep fingers and hands away from areas with movable parts. -
Move the speed selector from “0” to the desired speed (1-6). Once mixing is complete, turn the speed selector to “0” and unplug the appliance.
-
If the appliance is unplugged and the speed selector is left in speed mode (1-6):
The appliance will not start automatically. Turn the speed selector to “0”, then turn it to the desired speed.
OTHER FUNCTIONS -
Attachment hub : The appliance has two built-in multi-purpose attachment hubs, one in the front (A) and one in the back (B). Read and carefully follow the instructions that come with each attachment for correct and safe use.
**HOW TO USE THE MEAT GRINDER*** -
Insert the ground screw (B) into the grinder housing (A). Place the knife (C) over the square shaft at the end of the ground screw. Place the grinding plate (D) (medium or coarse) over the knife. Tighten the ring (E) by hand until the meat grinder is secured.
Note: Do not over-tighten the ring. -
Push down the release button for the front attachment hub to the right and remove the attachment hub cover. Fit the power shaft of the attachment in the front attachment hub socket, using the attachment hub release button. The attachment release button will click into position once the meat grinder is securely attached. Place a container under the attachment
Caution: Before attaching accessories turn off the appliance and unplug it. -
Place the food tray over the grinder housing. Cut raw meat into small pieces and place them on the food tray. Plug in the appliance and turn the speed selector to the desired speed (recommended speed: 3-4). Feed the meat into the feed chute by using the pusher.
Caution: Do not put your fingers or other utensils in the feed chute.
Note: Meat should not contain bones, muscles, or skin.
**HOW TO USE THE SLICER/SHREDDER*** -
Choose a cylindrical slicer (medium or coarse) or a shredder knife. Insert the attachment by turning it clockwise into the slicer/shredder housing. Make sure the attachment is fully inserted.
Caution: The blades and inserts are very sharp! -
Push down the release button for the front attachment hub to the right and remove the attachment hub cover. Fit the power shaft of the attachment in the front attachment hub socket, using the attachment hub release button. Assemble the slicer/shredder in the attachment hub. The attachment release button will click into position once the slicer/shedder is securely attached. Place a container under the attachment. Cut the food into small pieces. Plug in the appliance and turn the speed selector to the desired speed (recommended speed: 4).
-
Feed the food into the feed chute by using the pusher. When finished using your attachment, turn off the appliance and unplug it. Place the front attachment hub cover using the attachment hub release button.
**HOW TO USE THE BLENDER*** -
Remove the rear attachment hub cover by pulling it straight backward. Place the bottom of the blender on the three rubber rings. Align the arrows on the blender to the arrows on the main body.
Caution: Turn off and unplug the appliance before attaching any accessories. -
Rotate the blender clockwise to lock it in position. The blender handle should point toward the back of the machine when properly fixed. Place the blender lid and measuring cup. Insert the plug in the main socket. Adjust the speed selector to the desired speed (recommended speed: 6), and mix until the right consistency of the blend is reached. Caution: Never operate the blender without ingredients.
CLEANING AND CARE -
Unplug the appliance. The wire whip, meat grinder and slicer/shredder should only be washed by hand in warm soapy water.
The bowl, flat beater, and dough hook are dishwasher-proof. Only place parts on the top rack if using a dishwasher.
Caution! The blades and inserts are very sharp and can cause injury.
Warning! Never immerse the housing, plug, or cord in water or any other fluid. Dry each part thoroughly before use. -
*Cleaning the blender:**
Rotate the blender counter-clockwise and remove. Take off the lid. Pour out the mixture from the blender. Add a drop of dishwashing soap and one liter of warm water. Fix the blender on the appliance. Run the machine on speed 6 for half a minute, then pour out the water. Rinse the blender and let it dry. Caution! The blades and inserts are very sharp and can cause injury. -
The housing should only be cleaned with a soft damp cloth, then dried with a cloth.
Note: Do not use abrasive cleaners or scouring pads to clean the surfaces of your appliance.
Enjoy your new Electrolux product!
SAFETY ADVICE
Read the following instruction carefully before using the appliance for the first time.
-
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
-
Care shall be taken when handling the sharp cutting blades and tools, emptying the bowl, and cleaning.
-
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved.
-
Children shall not play with the appliance.
-
Cleaning and user maintenance shall not be made by children without supervision.
-
The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate!
-
Never use or pick up the appliance if
– the supply cord is damaged,
– the housing is damaged. -
If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person, in order to avoid hazards.
-
Always place the appliance on a flat, level surface.
-
Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling, or cleaning.
-
Do not immerse the appliance, cord, or plug in water or any other liquid.
-
Do not let the cord hang over the edge of the table or counter, and do not let the cord contact a hot surface, including the stove.
-
Never use accessories or parts made by other manufacturers not recommended or sold; may cause a risk of injury to persons.
-
Make sure the motor has completely stopped before disassembling and cleaning.
-
Avoid contact with blades or moving parts. Contact could result in injury! Do not use other tools or utensils during appliance usage.
-
Do not leave this product out of your sight when it is running.
-
Ensure your hair, all loose matter, and your clothes/accessories are kept away while using this product.
-
Never process boiling liquids (max 90°C).
-
Do not use this appliance to stir paint. Danger could result in an explosion!
-
Never operate appliances with the attachments wire whip, flat beater, or dough hook unless the bowl is in place.
-
This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.
-
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, the appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
-
Do not use this appliance with multi- attachments at the same time.
-
Switch off the appliance and disconnect from the supply before changing accessories or approaching parts that move in use.
-
UNPLUG FROM THE OUTLET WHEN NOT IN USE, BEFORE INSERTING OR REMOVING PARTS, AND BEFORE CLEANING.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
|---|---|---|
| The motor slows down during operation. | The amount of dough may exceed the | |
| maximum capacity. | Remove half and process in two batches. | |
| The dough may be too wet, it sticks to the side of the bowl. | Add more flour, |
1 tablespoon at a time until the motor speeds up. Process until dough cleans
the side of the bowl.
The appliance does not start.| The appliance is not connected to the mains.|
Make sure to plug in the appliance before operation.
The speed selector was not in the “0” position when the machine was plugged
and unplugged.| Turn the speed selector to the “0” position, and then to the
desired speed.
The blender is not fixed in the correct position.| The blender handle should
point toward the back of the machine when properly fixed.
The rear attachment hub cover is not in place or properly assembled.| Attach
the rear attachment hub cover by pushing it straight forward until locked into
position.
The motor head is in the upper position.| Set the speed selector to “0”. Tilt
the motor head down. Move the speed selector from “0” to the desired speed
(1-6).
The appliance vibrates/moves during operation.| The suction feet are not fixed
to the surface properly.| Make sure the suction feet are clean. Place the
machine on a smooth and shiny surface.
It is normal for heavy loads (e.g heavy dough, cheese).| Remove half and
process in two batches.
DISPOSAL
This symbol on the product indicates that this product contains a battery that
shall not be disposed of with normal household waste.
This symbol on the product or on its packaging indicates that the product may
not be treated as household waste. To recycle your product, please take it to
an official collection point or to an Electrolux service center that can
remove and recycle the battery and electric parts in a safe and professional
way. Follow your country’s rules for the separate collection of electrical
products and rechargeable batteries.
Electrolux reserves the right to change products, information, and
specifications without notice.
RECIPES
WHISKING FUNCTION QUANTITIES AND PROCESSING TIMES
Ingredients| Quantity| Unit| Time| Speed|
Cream| 200-400| g| 120~160s| 5~6|
Egg-white| 60-240 (2- 8 eggs)| g/pcs| At least 120s| 5~6|
BEATING FUNCTION QUANTITIES AND PROCESSING TIMES (MIXING LIGHT DOUGH (E.G:
CAKE DOUGH))
Recipe| Ingredients| Quantity| Unit| Time/Speed| Method
Chocolate cake| Flour| 300| g| ****
300~360s Medium setting (3~4 setting)
| ****
The butter should be soft, not hard. Stir the soft butter with sugar until creamy. Add the eggs one after another. While stirring, add the sour cream and vanilla sugar.
Finally, stir in the flour together with the baking soda.
Egg| 3| pcs
Butter| 150| g
Sugar| 150| g
Vanilla Sugar| 2| tsp
Sour cream| 100| g
Nougat raw mixture| 100| g
Baking soda| 3| tsp
Butter Cake| Flour| 150| g| ****
200~240s Medium setting (3~4 setting)
| ****
Place all ingredients in the bowl, and mix them, till it is ready.
Margarine| 150| g
Sugar| 150| g
Fresh egg| 3| pcs
Baking powder| 1| tsp
HOOKS FUNCTION QUANTITIES AND PROCESSING TIMES
Recipe| Ingredients| Quantity| Unit| Time/Speed| Method
Yeast dough* (bread) min. Quantities
| Flour| 750| g| ****
300~360s
A low setting (1~2 setting)
| ****
Place all the ingredients into the bowl and knead until satisfactory.
Warm water| 400| mL
Sugar| 20| g
Margarine| 20| g
Salt| 10| g
Dry yeast| 3| g
Yeast dough* (Pizza dough) max quantities| Wheat flour| 700| g| At least 360s
Low setting (1~2 setting)|
Warm water| 300| mL
Oil| 75| mL
Fresh egg| 1| pcs
Salt| 3| tsp
Sugar| 1| tsp
Dry yeast| 10| g
Method
1. In a container mix the half of yeast with the salt and the sugar and set
aside;
2. In the bowl of a stand mixer put the remaining yeast, the water, and the
oil;
3. This dough should be mixed with common beaters, at minimum speed until
obtaining a smooth mixture;
4. After, add the egg and the yeast mixed with salt and sugar;
5. The speed should be increased to medium and the flour should be added
gradually;
6. After realizing that the mass tends to rise by the beaters, they must be
changed by the beaters for heavy mass;
7. Put all the flour and mix until obtaining a homogenous mixture;
8. At this point you will need to monitor the input power of the stand mixer
so that it does not exceed the maximum value determined by the manufacturer;
9. The mass reaches the point when no more paste in the hand.
*Do not exceed Speed 2 when preparing yeast dough. This may damage the hook. The mass of the dough should not exceed 1200 g. The overmuch dough will damage the hook
CONSUMABLES & ACCESSORIES
|
---|---
Meat grinder
Ref: MGM01
PNC: 900168891/1| Salad Maker
Ref: SMM01
PNC: 900168892/9
|
Blender Jar
Ref: PJM01
PNC: 900168893/7| Burger press
Ref: EHP01
PNC: 900168373/0
3483 E EKM3xxx 02 01 1117
Share more of our thinking at www.electrolux.com
Electrolux Floor Care AB
S:t Göransgatan 143
S-105 45 Stockholm
Sweden
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>