Backyard Discovery 2206069COM Norwood 10 ft. x 10 ft. Light Brown Gazebo Installation Guide

Discovery 2206069COM Norwood 10 ft. x 10 ft. Light Brown Gazebo
Installation Guide

PRE-ASSEMBLY STEP 1 – SORTING PARTS

It is critical for ease of assembly that you take the time to sort and organize the wood and hardware.
WOOD PARTS:

• Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01).
• If there are multiple boards with the same stamped number, stack those pieces together.
• Stamps can be found on the flat surface of the boards or on the end of the boards.
•  Allow yourself plenty of room – the wood pieces can take up a significant amount of space.

NOTE: CARTONS ARE NOT ORGANIZED BY BOARD NUMBER.

HARDWARE PARTS:

• We recommend that you have a separate table to organize the hardware.
• Hardware bags are printed with a seven-digit, alpha-numeric part number.
• You can organize your hardware by part number or group by hardware type (i.e. bolts, nuts, etc.).
• During assembly you only need to reference the last four digits of the number.

PRE-ASSEMBLY STEP 2 – TOOLS REQUIRED

PRE-ASSEMBLY STEP 3 – CHOOSE YOUR ASSEMBLY METHOD

There are several types of assembly instructions available to you.

1. Printed Assembly Manual included with your set
2. BILT APP – 3D interactive instructions
3. Combination of the Printed Manual and BILT APP (Note: Step numbers can differ between the two methods)

https://sj83t.app.goo.gl/eZ7o
Scan for easy 3D instructions
Download the BILT app before you begin

STEP 1 – POST ASSEMBLY

STEP 2 – GABLE ASSEMBLY

STEP 3 – GABLE ASSEMBLY

STEP 4 – GABLE ASSEMBLY

USE METAL BRACKET AS A GUIDE AND DRILL THROUGH USING A 7/16″ (10mm) DRILL BIT, IF NEEDED.

STEP 5A – GABLE ASSEMBLY

STEP 5B – GABLE ASSEMBLY

STEP 6 – GABLE ASSEMBLY

REPEAT POST AND GABLE ASSEMBLY STEPS 1 THROUGH 6
STEP 7 – GAZEBO ASSEMBLY

STEP 8 – GAZEBO ASSEMBLY

STEP 9 – GAZEBO ASSEMBLY

STEP 10 – GAZEBO ASSEMBLY

STEP 11 – GAZEBO ASSEMBLY

STEP 12 – ROOF PANEL ASSEMBLY

STEP 13A – ROOF PANEL ASSEMBLY

STEP 13B – ROOF PANEL ASSEMBLY
TIP: LOOSEN HARDWARE TO ADJUST FOR SQUARING I F NEEDED.
CRITICAL:

• SQUARE UNIT BEFORE PROCEEDING TO NEXT STEPS.
• THE BELOW DIMENSIONS ARE CRITICAL TO THE FINAL ROOF ASSEMBLY.
• MEASUREMENTS SHOULD BE HELD WITHIN +/- 1/4″.
• MEASUREMENTS OUTSIDE OF TOLERANCE WILL LEAD TO THE INABILITY TO ASSEMBLE THE ROOF.

STEP 14 – ROOF PANEL ASSEMBLY
USE THIS PAGE TO FAMILIARIZE YOURSELF WITH THE ROOF PANEL AND ASSIST YOU IN STEPS 15 – 17.
TIPS:

• REMOVE PROTECTIVE BLUE FILM
• START AT THE END INDICATED AND ASSEMBLE IN THE DIRECTION OF THE ARROW.

GLOVES SHOULD BE WORN WHEN HANDLING ROOF PANELS: EDGES ARE SHARP

STEP 15 – ROOF PANEL ASSEMBLY

STEP 16 – ROOF PANEL ASSEMBLY

STEP 17 – ROOF PANEL ASSEMBLY

REPEAT ASSEMBLY STEPS 12 THROUGH 17 FOR OTHER ROOF PANEL
STEP 18 – ROOF ASSEMBLY

WITH ATLEAST TWO PEOPLE, LIFT ASSEMBLED ROOF PANEL AND SLIDE IT INTO THE TRACKS ON THE RAFTERS. ONCE IN PLACE, INSTALL ATTACHMENT HARDWARE AS SHOWN.
A THIRD PERSON IS HELPFUL TO ATTACH ROOF ONCE I N PLACE.

STEP 19 – ROOF ASSEMBLY

WITH ATLEAST TWO PEOPLE, LIFT ASSEMBLED ROOF PANEL AND SLIDE IT INTO THE TRACKS ON THE RAFTERS. ONCE IN PLACE, INSTALL ATTACHMENT HARDWARE AS SHOWN.
A THIRD PERSON IS HELPFUL TO ATTACH ROOF ONCE IN PLACE.

STEP 2 0 – ROOF ASSEMBLY

STEP 21 – ROOF ASSEMBLY

STEP 22 – ROOF ASSEMBLY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>