DOMETIC SabreLink Flex Starter Kit User Manual
- June 6, 2024
- Dometic
Table of Contents
AWNINGS LIGHTING
SabreLinkFlex
Lighting system
Installation and Operating Manual
© 2021 Dometic Group. The visual appearance of the contents of this manual is
protected by copyright and design law. The underlying technical design and the
products contained herein may be protected by design, patent, or be patent
pending. The trademarks mentioned in this manual belong to Dometic Sweden AB.
All rights are reserved.
Please read these instructions carefully and follow all instructions,
guidelines, and warnings included in this product manual in order to ensure
that you install, use, and maintain the product properly at all times. These
instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions,
guidelines, and warnings carefully and that you understand and agree to abide
by the terms and conditions as set forth herein. You agree to use this product
only for the intended purpose and application and in accordance with the
instructions, guidelines, and warnings as set forth in this product manual as
well as in accordance with all applicable laws and regulations. A failure to
read and follow the instructions and warnings set forth herein may result in
an injury to yourself and others, damage to your product, or damage to other
property in the vicinity. This product manual, including the instructions,
guidelines, warnings, and related documentation, may be subject to changes and
updates. For up-to-date product information, please visit
documents.dometic.com.
Explanation of symbols
WARNING!
Safety instruction: Indicates a hazardous situation that, if not avoided,
could result in death or serious injury.
CAUTION!
Safety instruction: Indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
NOTICE!
Indicates a situation that, if not avoided, can result in property damage.
NOTE
Supplementary information for operating the product.
Safety instructions
General safety
WARNING! Failure to obey these warnings could result in death or serious injury.
Electrocution hazard
- If this device’s power cable is damaged, the power cable must be replaced by the manufacturer, a service agent or a similarly qualified person in order to prevent safety hazards.
- This device may only be repaired by qualified personnel. Improper repairs can lead to considerable hazards.
- Avoid the power cord, plug or other electrical parts to get in contact with water or any other liquid.
Health hazard
- This device can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved.
- Children shall not play with the device.
- Cleaning and user maintenance shall not be made by children without supervision.
Operating the device safely
WARNING! Failure to obey these warnings could result in death or serious
injury.
Electrocution hazard
- Do not operate the device if it is visibly damaged.
- Do not operate the device if any of the components have been subjected to moisture.
- Only use accessories that are recommended by the manufacturer.
- Do not modify or adapt any of the components in any way.
Fire hazard
- When positioning the device, ensure the supply cord is not trapped or damaged.
- Do not locate multiple portable socket-outlets or portable power supplies at the rear of the device.
Health hazard
- If the flexible wiring connected to this light is within arms reach fix it to the wall to reduce the risk of strangulation.
CAUTION! Failure to obey these cautions could result in minor or moderate
injury.
Health hazard
- When positioning the device, ensure that all cables are suitably secured to avoid any form of a trip hazard.
NOTICE! Indicates a situation that, if not avoided, can result in property damage.
- Check that the voltage specification on the type plate corresponds to that of the energy supply.
- Ensure that the main power adapter is plugged into an outlet that has a residual current device.
- Never pull the plug out of the socket by the cable.
- Never immerse the device in water.
- Protect the device and cables against heat and moisture.
- The device shall not to be exposed to rain.
Scope of delivery
Starter kit
No. in fig. 1, page 3 | Quantity | Description |
---|---|---|
1 | 1 | Remote control |
2 | 1 | Remote receiver |
3 | 1 | 6 m DC cable |
4 | 1 | 3 m AC cable with power adapter |
5 | 1 | 1.5 m velcro strip |
6 | 1 | LED light |
Add-on kit
No. in fig. 2, page 3 | Quantity | Description |
---|---|---|
1 | 1 | LED light |
2 | 1 | 3 m connection cable |
3 | 1 | 1.5 m velcro strip |
Intended use
The lighting system is suitable for:
-
Interior illumination within tents or awning tents
-
Indoor use only
The lighting system is not suitable for: -
Outdoor use
This product is only suitable for the intended purpose and application in
accordance with these instructions.
This manual provides information that is necessary for the proper installation
and/or operation of the product. Poor installation and/or improper operating
or maintenance will result in unsatisfactory performance and a possible
failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
- Incorrect assembly or connection, including excess voltage
- Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
- Alterations to the product without express permission from the manufacturer
- Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
The radio equipment of the device complies with the requirements of the
directive 2014/53/EU. You can find the Declaration of Conformity of the device
on documents.dometic.com.
Technical description
The lighting system is designed for operation with AC power or DC power. Up to
three LED lights can be linked together using one power adapter.
The light source of this light is not replaceable. When the light source
reaches its end of life the whole light shall be replaced.
Control elements
No. in fig. 3, page 3 | Description |
---|---|
1 | On/off button |
2 | + and – buttons |
3 | Percentage buttons |
Installing the device
NOTE
All 2021-onwards Dometic tents already have velcro stitched onto their AIR
poles. For those tents, adding the self-adhesive velcro is not required.
Starter kit
➤ Proceed as shown (fig. 5, page 4 – fig. 7, page 4).
Add-on kit
➤ Proceed as shown (fig. 8, page 4).
Using the device
Before first use
- Remove the plastic tab from the remote control‘s battery.
- Pair the remote control to the remote receiver (fig. 0, page 5).
Switching on and off
➤ Proceed as shown (fig. 9, page 4).
Dimming the light
➤ To dim the light continuously, proceed as shown (fig. a, page 5).
➤ To dim the light in percentage steps, proceed as shown (fig. b, page 5).
Changing the battery of the remote control
WARNING!
Keep batteries away from children.
➤ Replace the battery with a battery of the same type (3 V CR2025, see fig. 4,
page 3).
Storing the device
➤ Store the device in a clean, dry, and dust-free space.
Cleaning and maintenance
WARNING! Electrocution hazard
Unplug the lighting system from the power supply before cleaning and
maintenance.
NOTICE!
- Never clean the lighting system under running water or in dishwater.
- Do not use sharp or hard objects, abrasive cleaning agents or bleach during cleaning as these can damage the lighting system.
➤ Occasionally clean the lighting system with a soft, damp cloth.
Troubleshooting
Fault | Possible cause | Solution |
---|---|---|
The remote control does not work. | The plastic tab that isolates the battery | |
has not been removed before first use. | Remove the plastic tab. | |
The battery of the remote control is empty. | Replace the battery with a |
battery of the same type (see chapter “Changing the battery of the remote
control” on page 12).
The remote receiver is placed within a metal enclosure or another closed-off
location and therefore the RF wireless signal is compromised.| Place the
remote receiver away from any metal enclosure or closed-off locations.
The remote control is not paired to the remote receiver correctly.| Pair the
remote control to the remote receiver (see chapter “Before first use” on page
12).
Warranty
The statutory warranty period applies. If the product is defective, please
contact your retailer or the manufacturer’s branch in your country (see
dometic.com/dealer).
For repair and warranty processing, please include the following documents
when
you send in the product:
- A copy of the receipt with purchasing date
- A reason for the claim or description of the fault
Disposal
➤ Place the packaging material in the appropriate recycling waste bins,
wherever possible.
Consult a local recycling center or specialist dealer for details about how to
dispose of the product in accordance with the applicable disposal regulations.
Protect the environment!
Do not dispose of any batteries with general household waste.
Return defective or used batteries to your retailer or dispose of them at
collection points.
Technical data
Further product information can be accessed via QR code on the energy label on the product or via eprel.ec.europa.eu.
SabreLlnk150|
---|---
Connection voltage:| 220 – 240 V∼
12 V ****
Power consumption:| 36W-± 10 %
Dimensions (W x H x D):| 1500 x 20 x 10 mm
Weight:| 0.28 kg
Conformity:|
| Remote control
---|---
Working voltage:| 12 – 24 V ****
Output current:| Peak 6 A
Mode:| RF wireless
Frequency:| 433.92 MHz
Distance:| > 30 m in an open area
Conformity:|
YOUR LOCAL DEALER
dometic.com/dealer| YOUR LOCAL SUPPORT
dometic.com/contact| YOUR LOCAL SALES OFFICE
dometic.com/sales-offices
---|---|---
A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of: DOMETIC GROUP AB Hemvarnsgatan 15 SE-17154 Solna Sweden
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>