HOERMANN HSS 4 BiSecur Security Hand Transmitter Instruction Manual

HOERMANN HSS 4 BiSecur Security Hand Transmitter Instruction Manual

These instructions are divided into a text section and an illustrated section. They contain important information on the product, and especially safety instructions and warnings.

• Read through the instructions carefully.
• Keep these instructions in a safe place.

Dissemination as well as duplication of this document and the use and communication of its content are prohibited unless explicitly permitted.

Noncompliance will result in damage compensation obligations. All rights reserved in the event of patent, utility model or design model registration. Subject to changes.

Safety instructions

Intended use

The security hand transmitter HSS 4 BiSecur is a unidirectional transmitter for operators and their accessories. It is operated via the BiSecur radio.

Other types of application are prohibited. The manufacturer is not liable for damage caused by improper use or incorrect operation.

Safety instructions for teach-in and operation

WARNING
Risk of injury during intended or unintended door travel

• Make sure that hand transmitters are kept away from children and can only be used by people who have been instructed on how the remote-controlled door system functions!
• If the door has only one safety device, only operate the hand transmitter if you are within sight of the door!
• Drive or walk through the door openings only when the door is in the Open end-of-travel position!
• Never stand in the door’s area of travel.
• Note that accidentally pressing a button on the hand transmitter can result in door travel.
• Make sure that no persons or objects are in the door’s area of travel when teaching in the radio system.

NOTE

• If there is no separate entrance, perform changes and extensions of radio systems while standing in the facility.
• After programming or extending the radio system, you have to perform a function check.
• Local conditions may affect the range of the radio system.

Scope of delivery

• Security hand transmitter HSS 4 BiSecur
• 1 × 1.5 V battery, type: AAA (LR03), alkali-manganese
• Battery lid
• Operating instructions

Product description (see Figure 1 )

1. LED, bi-colour
2. Hand transmitter buttons
3. Battery lid
4. Battery

Initial start-up

After inserting the battery, the security hand transmitter HSS 4 BiSecur is ready for operation (see Figure 1 , 4 ).

Changing the battery (see Figure 2 )

WARNING
Risk of explosion due to incorrect battery type

• Use only this battery type: 1 × 1.5 V battery, type: AAA (LR03), alkali-manganese
• Remove the battery from the hand transmitter if it is out of use for a long period of time.

Proper disposal: See section 10

Operation

Each hand transmitter button is assigned a radio code.

• Press the button of the hand transmitter whose radio code you want to transmit.
• The LED is illuminated blue for 2 seconds.
• The radio code is transmitted.

Learning and inheriting / transmitting a radio code

CAUTION
Danger of injuries due to unintended door travel

See warning in section 1.2

NOTE
Radio codes can only be inherited from the security hand transmitter.

Radio codes from other hand transmitters cannot be taught in on this hand transmitter.

1. Press the button of the hand transmitter whose radio code you want to inherit/ transmit and keep it pressed.
   • The radio code is transmitted and the LED is illuminated blue for 2 seconds then goes out.
   • After 5 seconds, the LED alternates flashing in red and blue; the radio code is transmitted.
2. If the radio code is transmitted and recognised, release the hand transmitter button.
   • The LED goes out.

NOTE
You have 15 seconds to inherit/ transmit the radio code. If inheriting / transmitting the code was not successful within this period of time, repeat the process.

Reset

Each hand transmitter button is assigned a new radio code by means of the following steps.

• Open the battery lid.
• Remove the battery for 10 seconds.
• Press a hand transmitter button and keep it pressed.
• Insert the battery.
  • The LED flashes slowly in blue for 4 seconds.
  • The LED flashes rapidly in blue for 2 seconds.
  • The LED is illuminated blue for a prolonged period of time.
• Release the hand transmitter button. All radio codes have been newly assigned.
• Close the battery lid.

NOTE
If the hand transmitter button is released prematurely, no new radio codes are assigned.

LED display

Blue (BU)

the teach-in procedure
Flashes slowly for 4 seconds, flashes rapidly for 2 seconds, illuminated for a prolonged period| Device reset is being performed and completed

Red (RD)

battery should be replaced soon
Flashes twice; following this, the radio code is no longer transmitted| The battery must be replaced immediately

Blue (BU) and Red (RD)

Cleaning

ATTENTION
Damaging the hand transmitter by faulty cleaning

Only clean the hand transmitter with a clean, soft cloth.

NOTE
Regular use of disinfectants can cause damage to the hand transmitter.

Disposal

Dispose of the packaging sorted by materials

Electrical and electronic devices must be returned to the appropriate recycling facilities.

Dispose of the batteries separately. Each consumer is legally required to leave batteries with a collection point in their community, their district, or with a trader

Technical data

EU and UK Declaration of Conformity

Hörmann KG Verkaufsgesellschaft and Hörmann UK Ltd. herewith declares that the radio equipment type security hand transmitter HSS 4 BiSecur complies with the EU Directive 2014/53/EU and the UK Regulations 2017 No. 1206.

The complete text of the EU Declaration of Conformity and of the UK Declaration of Conformity can be found on the following website:

www.hoermann-docs.com/277112

HSS 4 BiSecur
Hörmann KG Verkaufsgesellschaft
Upheider Weg 94 – 98
33803 Steinhagen

References

• hoermann-docs.com/277112

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>