HUDORA 71646 Competition Pro Basketball Stand Instruction Manual

HUDORA 71646 Competition Pro Basketball Stand

Product Information

Product name: Basketball Hoop Stand – Model number: Art.-Nr. 71646 – Parts List: The product includes various components such as the base frame, vertical tubes, diagonal struts, basket ring, backboard, weight bag, screws, nuts, washers, foam coverings, net, sandbag, textile covers, and wrench keys. Product Usage Instructions: 1. Assembly: a. Start by assembling the base frame (1) by attaching the lower vertical tube (2) to it. b. Attach the left and right diagonal struts (3) to the base frame. c. Connect the basket ring (4) to the assembled structure. d. Attach the backboard (5) to the connecting tube for the board (6). e. Connect the upper vertical tube (7) to the backboard assembly. f. Attach the middle vertical tube (8) to the base frame and connect it to the upper vertical tube. g. Attach the rear support for the weight bag (9) and front support for the weight bag (10) to the middle vertical tube. h. Secure all the components using the provided screws of different sizes (11-18), nuts (13), and washers (12). 2. Usage: a. Once assembled, place the basketball hoop stand in a suitable location. b. Adjust the height of the hoop by extending or retracting the upper vertical tube. c. Attach the net (19) to the basket ring. d. Fill the weight bag (23) with sand and place it on the rear support to stabilize the stand. e. Use the basketball hoop stand for playing basketball and shooting hoops. Note: Refer to the user manual for detailed instructions on disassembly, maintenance, and safety precautions. Please note that this is a general interpretation based on the provided text extract. For accurate and complete instructions, it is recommended to refer to the original user manual or contact the manufacturer directly.

PARTS LIST

• Base frame

• Lower vertical tube

• Left/right diagonal strut

• Basket ring

• Backboard

• Connecting tube for board

• Upper vertical tube

• Middle vertical tube
  Rear support for weight bag

• Front support for weight bag

• Screw M8 x 35 mm

• Washer

• Nut M8

• Screw M8 x 93 mm

• Screw M8 x 45 mm

• Screw M8 x 40 mm

• Screw M8 x 85 mm

• Screw M8 x 90 mm

• Net

• Foam covering of the lower tube

• Foam covering of the middle tube

• Textile foot cover

• Weight bag (Volume: 93 l)

• Sandbag

• Textile cover for the middle tube

• Textile cover for the base frame

• Hexagon wrench key + Allen key

INSTRUCTIONS ON ASSEMBLY AND USE

CONGRATULATIONS ON

PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private/domestic use only. This product is not designed for commercial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS:

• Item: Stand Basketball Set Competition Pro
• Item number : 71646
• Weight: 24,5 kg
• Height-adjustable: 230 – 305 cm
• Purpose: Portable training rack for basketball throwing exercises.

If you have assembly problems or would like further information on the product, we have all you need and more at http://www.hudora.de/.

CONTENTS

• 1 x Basketball stand (cf. parts list on page 2)
• 1 x These instructions
  Other items included are meant to facilitate safe transportation and are not required for the installation and use of the product.

SAFETY INSTRUCTIONS

• Place the basketball stand on a firm and level surface and make sure this piece of equipment is positioned securely and firmly.
• Check that all connections have been tightly fastened before using the basketball stand and check again later!
• Always fill the counterweight bag with sand, so that the stability of the basketball stand is assured and it cannot fall forwards. Use the supplied sandbags in order to protect the bag.
• This training equipment is NOT a toy!
• Never allow children to play in the immediate proximity of this piece of training equipment without supervision and never let them assemble it.
• Never use the basketball stand near water or leave it outside in the rain.
• Wear suitable clothing when training. The clothes must be constituted in such a way that they cannot catch in anything during the training due to their fit.
• Always wear training shoes, and never train in bare feet, or when wearing sandals, socks or stockings.
• Never wear jewellery which could catch in the basketball basket.
• Do not climb up the basketball stand.
• Do not hang off the basket or make slam dunks, the basketball stand could tip over.
• If you start to feel unwell, discontinue training immediately.
• Only suitable for outdoor use.
• When permanently irradiated with UV light, the material ages significant-ly faster. To avoid premature aging and thereby extend the service life, you should always store the product in a dry and dark place when not in use. Do not permanently expose the product to wind, moisture, extreme temperatures or sunlight.

TOOLS REQUIRED

• 13 mm hexagon wrench key
• 6 mm Allen screw key
• Rubber hammer (not included in the delivery)

INSTRUCTIONS ON ASSEMBLY

NOTICE:
The product must be assembled by 2 adults.

Step 1:
Screw the lower vertical tube (2) with the screws (11), washers (12) and nuts (13) on the base frame (1). (Fig. 1)

Step 2:
Connect the base frame (1) and the lower vertical tube (2) with the diagonal struts (3). You should for this purpose use the screws (15) on the base frame, the screws (14) at the upper end of the struts, as well as the washers (12) and nuts (13). (Fig. 2)

Step 3:
Insert the supports (9 + 10) through the prefabricated loops of the weight pocket (23) and then into the sleeves of the base frame. The three sandbags (24) are used as to fill the weight pocket. Then assemble the textile base cover (22) on the front part of the base frame. (Fig. 3)

Step 4:
Mount the net (19) onto the basket ring (4). (Fig. 4)

Step 5:
Connect the basket ring (4), backboard (5) and rear connecting tube (6) to each other. You should for this purpose use the screws (16), as well as the washers (12) and nuts (13). (Fig. 5)

Step 6 :
Connect the middle and upper vertical tube (8 + 7). You should for this purpose use the screws (17), as well as the washers (12) and nuts (13). (Fig. 6)

Step 7 :
Plug the connecting tube from basket and backboard (6) onto the upper vertical tube (7) and screw it tight at the desired height. The height can be varied between 230 and 305 cm. You should for this purpose push the connecting tube (6) to the desired height, so that the pre-drilled holes are superimposed. You can now firmly screw the connecting tube (6) onto the upper vertical tube (7) with the screws (18), as well as the washers (12) and nuts (13). (Fig. 7)

Step 8:
Connect the lower with the middle vertical tube (2+8). You should for this purpose use the screws (17) as well as the washers (12) and nuts (13). (Fig. 8)

Step 9:
Mount the textile covers (25 + 26) onto the middle vertical tube (8) as well as onto the base frame. (Fig. 9)

Transport:
When filled with sandbags, the stand is very heavy and weighs up to 115 kg. You should remove the sandbags in advance, in order to be able to move the stand. You need a helper who should raise the front end of the foot while you concomitantly pull the rod towards you, as illustrated (Fig. 10). Once the weight has been shifted onto the transport rollers, you can roll the basketball stand to the desired location. Please note that frequent transport may damage the stand or the frame structure, due to the heavy weight.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special clea- ning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used anymore. If in any doubt, please contact our service team (http://www.hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.

DISPOSAL ADVICE
At the end of the product’s life, please dispose of it at an appropriate collection point provided in your area. Local waste management companies will be able to answer your questions on this.

SERVICE
We make every effort to deliver faultless products. If faults do arise ho- wever, we put just as much effort into rectifying them. Therefore, you can find numerous information on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.

All images are examples of the design.

References

• HUDORA® Sport und Freizeitartikel » Zum Online-Shop
• HUDORA® Sport und Freizeitartikel » Zum Online-Shop
• HUDORA® Sport und Freizeitartikel » Zum Online-Shop

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>