M-GAME G5Pro Max SE Machenike Gamepad User Manual

M-GAME G5Pro Max SE Machenike Gamepad

PACKING CONTENTS

Please check and confirm the accessories

MAINTENANCE

• Please clean the controller with a soft dry cloth or a specialized cleaning cloth
• Do not use solvents, such as gasoline, thinners, alcohol, kitchen detergent, chemical wipes, etc. This may cause external deformation or layer peeling
• Do not clean the controller with a wet cloth. This may cause liquid to get inside, resulting in malfunction

BUTTON LAYOUT

CONNECTION

One-Touch Wakeup Function: please select the corresponding device mode before connecting

• 2.4G mode

1. indicator flashes. Device name: Automatically matches receiver-connected device;
2. PC Mode- 2#1ndicatorflashes. Device Name: XboxWireless Controller;
3. NS Mode- 3#lndicatorflashes. Device Name: Pro Controller;
4. Mobile Mode- 4# indicator flashes. Device Name: Xbox Wireless Controller;

• Connect new devices: Press and hold the HOME button until the controller LOGO flashes quickly, and then the controller enters the pairing state. Just connect the corresponding device name above.
• Sleep/reconnect: Wireless connection use (Bluetooth/2.4G), if the controller is not operated for 10 minutes, it will automatically go to sleep; Wake up the controller by pressing the HOME key, and it will automatically reconnect.
• Turn off the controller: When using a wireless connection (Bluetooth/2.4G), press and hold the HOME button for more than 5 seconds to shut down the controller.

COMPATIBILITY

2.4G Mode — Supports PC, Switch, and Android TV

• The 2.4G dongle can automatically detect PC mode/Switch mode. You can manually switch between PC mode, Switch mode, and Dinput mode by pressing and holding for 3 seconds.
• To connect to Switch via 2.4G, you need to turn on the Pro wired controller in the system settings of the host communication function.

Connecting in 2.4G Mode

1. Make the Mode Toggle Switch to the 2.4G position.
2. Insert the receiver into the USB port of the device you want to connect to. Then the Dongle enters pairing mode.
3. Press and hold the HOME button for 3 seconds until indicator 1# rapidly flashes, then the controller enters the pairing mode.
4. The controller will automatically pair when brought close to the Dongle, and successful pairing will be indicated by vibration. The controller’s indicator light will stay lit for 3 seconds to display real-time battery status.

PC MODE

Bluetooth Connection Steps:

1. Make the Mode Toggle Switch to the PC position.
2. Press and hold the HOME button for approximately 3 seconds until indicator 2# rapidly flashes, indicating that the controller is in pairing mode.
3. On the Windows system, open Settings > Devices > Bluetooth & other devices > Add a device > Bluetooth.
4. From the list of discovered Bluetooth devices, select the “Xbox Wireless Controller” and once successfully paired, the 2# indicator light will stay lit for 3 seconds to display real-time battery status.

Wired Connection Steps:

1. With the controller powered off, make the Mode Toggle Switch to the PC position.
2. Use the data cable to directly connect the controller to the device, and it will be ready for use.

NS Mode

• In Switch mode, depending on your preference, you can switch to the Switch button layout by long-pressing the combination key FN + A for 3 seconds, and the controller will vibrate once as confirmation.
• It supports the Home button to wake up the controller and the remote console.
• It supports gyroscopic function, which needs to be enabled in games that support this feature in their settings.

Connection Steps – Bluetooth Connection:

1. Make the Mode Toggle Switch to the NS position.
2. Press and hold the HOME button for about 3 seconds until the 3# indicator light rapidly flashes, indicating that the controller is in pairing mode.
3. On the Switch home screen, open Controller Settings and select Change Grip/ Order, then wait for the controller to appear.

Connection Steps – Wired Connection:

1. In the Switch settings, enable the wired controller function and insert the Switch console into the official multifunctional dock.
2. With the controller powered off, switch the Mode Toggle Switch to the NS position. Use the data cable to directly connect the controller to the device, and it will be ready for use.

Mobile Mode – iOS/Android /Tablet/Huawei Phone:

Connection Steps – Bluetooth Connection:

1. Make the Mode Toggle Switch to the PHONE position.
2. Press and hold the HOME button for about 3 seconds until the 4# indicator light rapidly flashes, indicating that the controller is in pairing mode.
3. Open the device settings, go to Bluetooth, search, and connect to “Xbox Wireless -s Controller.”
4. After successful pairing, the 4# indicator light will stay on for 3 seconds to display -real-time battery status.

BATTERY DISPLAY

Controller Battery Status Display: Controller Power Status

Indicator

• More than 75% battery –#1/#2/#3/#4 channel indicator lights stay on;
• 50%-74% battery – -#2/#3/#4 channel indicator lights stay on;
• 25%-49% battery -#3/#4 channel indicator lights stay on;
• 10%-25% battery #4 channel indicator light stays on;
• Less than 10% battery -#4 channel indicator light flashes;
• Charging— the corresponding channel indicator light flashes;
• Charging is complete LOGO light stays on, and the 4-channel indicator lights stay on for 1 minute and then turn off.
• The controller has a built-in 600mAh lithium battery.

Note : During pairing and some function adjustments, the channel indicator lights will temporarily serve as function indicators and return to the battery level display after about 3 seconds. When using a wired connection, the channel indicator lights display real-time charging status, while in wireless mode, they display real-time battery level.

Attention! Don’t use a power source exceeding 5V 1A to charge the controller, to avoid causing damage to the device.

COMBINATION BUTTONS

FUNCTION

| COMBINATION BUTTONS| INDICATOR LIGHTS

/NOTES

---|---|---
Light Brightness Adjustment| [FN] + D-pad [t-]|
Light Mode Adjustment| [FN] + D-pad 1-1|

Vibration Intensity Adjustment

|   [FN] + D-pad It]/[ t]| 1/2/3/4# – Very Strong 2/3/4# – Strong

3/4# – Medium 4# – Weak

Joystick Dead Zone Switch

|  |
Joystick Circular Area Adjustment Switch| [LS]+ [RS]

simultaneously pressed

+ [FN]

| Successful switch confirmation with vibration
Air Mouse| [FN] + [LS] to turn on/off| only for PC wired mode

When using combination keys, it is essential to follow the specified button sequence mentioned above; otherwise, switching may not work correctly.

HALL SYSTEM CALIBRATION

*During calibration, please gently move the joystick and lightly press the trigger to the fullest extent to avoid joystick/trigger issues.

HALL JOYSTICKS AND TRIGGERS CALIBRATION

1. Press and hold the + [B] + [HOME)buttons to turn on the calibration in the power-off state
2. Joystick calibration: fully move the joystick left and right slowly and rotate it more than three times.
3. Trigger calibration: press the [LT] and [RT] buttons to the bottom more than once.
4. Press the [≡] button to complete the calibration.

MOTION SENSING CALIBRATION

1. Simultaneously press the button + [A]button + [HOME]button to activate the calibration function.
2. Place the controller flat on the tabletop.
3. Press the [≡]button to initiate automatic calibration.
4. Wait for the controller to automatically power off. This indicates that the calibration process has been completed.

ADVANCED FUNCTIONALITY

Programming Buttons Macros:

Controller Operation:

1. With the controller already connected, simultaneously press the FN key + M1/2 key. The decorative light strip will continuously flash, indicating that you’ve entered the recording mode. If it doesn’t flash, please repeat this operation.
2. Sequentially input the function keys you want to set.
3. After the setting is complete, briefly press the corresponding macro key (M1/M2). The decorative light strip backlight will stop flashing and return to the previous mode, indicating that the configuration is complete.

Note : Clearing the current M1 macro definition: While the controller is in working status, simultaneously press FN + M1. The decorative light strip will continuously flash, and then press the M1 key once more. The decorative light strip will stop flashing, clearing the current custom function. The same steps apply to clearing other macro keys.

TURBO Function:
Supported TURBO buttons: A/B/X/Y/LB/LT/RB/RT
Manual TURBO Function: Press the FN+A keys to turn on the manual TURBO function
of the A key. You need to manually hold down A to trigger it.

To enable the TURBO function:

1. Press and hold FN+A and then release it. At this point, the A button activates the manual continuous fire function.
2. Press FN+A again. Now, the A button activates the automatic continuous fire function.
3. Press FN+A once more to disable the continuous fire function.

Note: FN+A/B/X/Y/LB/LT/RB/RT can be used to enable the TURBO function for the corresponding buttons. When buttons are in continuous fire mode, the Home button indicator light will flash in synchronization.

For more customized functions, settings can be adjusted in the Keylinker app.

APP Download for Android/HarmonyOS/iOS:

1. Download the app and related firmware updates from the Machenike official website: https://global.machenike.com/
2. Or scan the QR code on the right using your browser to access the download page.
3. For HarmonyOS, please download the Android version of the app.

Connection Steps:

1. After correctly installing the Keylinker software on your phone, confirm the relevant permissions prompts that appear when you first start the app.
2. Start the controller in any mode, and you can find “G5Pro Max SE” on the Keylinker app’s main page.
3. Click “G5Pro Max SE” to connect and enter the customization interface.

Note : *This function does not require the controller to connect to the mobile phone via Bluetooth. Follow the above operations to open Keylinker to change the controller settings.

ADVANCED FUNCTIONALITY

The Controller Stand of set edition Function Introduction:

*The Controller Stand of the set version only supports the charging function of the controller.

RESET

When the controller is unresponsive or unable to identify the working mode during operation or access, you can pull out the USB cable of the controller and reconnect it, or use the manual mode to select into the corresponding working mode. If the problem still can not be solved, please long press the [HOME] button for 10 seconds or check the compatibility of the operating system and equipment with the controller, if still can not be solved, please contact the dealer customer service.

Copyright Information

PlayStation is a registered trademark of Sony lnterac Live Entertainment (SIE).

XBOX/Windows is a registered trademark of Microsoft Corporation.
Android is a trademark of Google inc.
Nintendo Switch is a registered trademark of Nintendo Co.
Marcos is a registered trademark of Apple Inc. in the Un

-ited States or other countries.

Other system and product names that appear in this do

-documents are generally registered trademarks or trade

-arks of the respective developer companies. Please no

-le that the “logo and®logos do not appear in this doc

-ument.

Please consult customer service or the brand’s website for updates to the product firmware without notice.

Machine Official Website: https://global.machenike.com/

SPECIFICATIONS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>