DINAN D100-0942 Performance Spring Set G01 X3 M40i Installation Guide
- June 12, 2024
- DINAN
Table of Contents
DINAN D100-0942 Performance Spring Set G01 X3 M40i
Product Information
Product Name: D100-0942 SPRING SET; G01 X3 M40i
Part Number: D100-0942
Recommended Companion Handling Kit: D1930121
Product Usage Instructions
Installation Notes
Please read the following instructions before beginning the installation:
- Refer to the part number printed on each spring to determine the correct installation location.
- For best results, we recommend installation of the companion handling kit, p/n D1930121.
Front Installation
Camber Caster: Install according to the specifications provided.
Rear Installation
Camber: Install according to the specifications provided.
Total Toe: Install according to the specifications provided.
If you encounter any difficulties during the installation or if these instructions are not clear to you, please call Dinan’s Technical Support Staff at 800-341-5480.
Happy Motoring!
INS100-0942
Rev. 3/29/23
PLEASE READ BEFORE BEGINNING INSTALLATION
Please refer to the part number printed on each spring to determine the correct installation location:
- D100-1005 = Front Spring
- D100-1007 = Rear Spring
For best results, we recommend installation of the companion handling kit, p/n D193-0121.
Alignment
- An alignment is required after installation.
- All Dinan suspension alignments are done with full fuel tanks and no weight inside the vehicle.
- Specifications are as follows:
| FRONT: | Setting | Tolerance |
|---|---|---|
| Camber | – 0.9° | ± 0.42° |
| Caster | 6.0° | ± 0.5° |
| Total Toe | 0.17° | ± 0.07° |
| REAR: | ||
| Camber | – 1.5° | ± 0.08° |
| Total Toe | 0.27° | ± 0.07° |
If you encounter any difficulties during the installation, or if these
instructions are not clear to you, please call Dinan’s Technical Support Staff
@ 800-341-5480.
Happy Motoring!