D440-1700 Dinan Throttle Booster Instruction Manual
- June 3, 2024
- DINAN
Table of Contents
D440-1700 Dynan Throttle Booster
Dynan Engineering
4800 US Hwy 280 West
Opelika, AL 36801
Phone: 800.341.5480
Instruction Manual
D440-1700 Dynan Throttle Booster
Thank you for being selective enough to choose a Dynan Throttle Booster. The
Dynan Engineering Team has spent many hours developing this product to assure
that you will receive increased performance and durability that you as a
customer will be able to enjoy for many years. Ease of installation and
maintenance is important to us and has been highly considered throughout the
design process.
Prior to performing the installation, familiarize yourself with these
instructions as it should help you with the process. If you feel that you do
not have the required skills or tools, please arrange for a qualified repair
facility to perform the installation.
If you have any difficulties during the installation, or if these instructions
are not clear to you, please call Dinna’s Technical Support Staff at
800-341-5480.
Again, thank you for choosing Dynan. Enjoy.
INSTALLATION
STEP 1:
DISCLAIMER:
Installation procedure shown is a representative of the general physical
installation procedure. Installation of The Dynan Throttle Booster on your
specific vehicle may vary slightly.
Remove floormat
Remove plastic cover on pedal base
Remove screw holding the pedal in place
STEP 2:
Turn pedal over and disconnect plug
STEP 3:
Remove under panel to access cable management and placement of control
module
STEP 4:
Feed OEM wire behind carpet and attach to supplied harness
STEP 5:
Feed other harness behind carpet and pass the blue connector end through the
opening of the carpet. This end will plug into the pedal
STEP 6:
Attach the other ends of the supplied cables to the rear of the Dinna throttle
box
White to White
Black to Black
STEP 7:
Use supplied zip ties and position the box in your chosen location
Each vehicle is different and position shall be determined by customer
The position shall be snug to ensure that it does not interfere with the
replacement of the under panel and that the cables are managed to not
interfere with the pedal.
STEP 8:
Secure under panel back to vehicle
STEP 9:
Plug in blue end connector to pedal
STEP 10:
Position pedal into place, tighten screw and re-connect plug.
Press on pedal to ensure full range of motion
Cable management behind the carpet shall not interfere with the range of the
pedal
STEP 11:
Now that the physical installation is complete, follow the Quick Start
Guide supplied in the kit to complete the software installation and
calibration with your iOS or Android device Enjoy and do not run into the car
in front of you!
Installation Instructions- INS440-1700 REV. A
Documents / Resources
|
DINAN D440-1700 Dinan Throttle
Booster
[pdf] Instruction Manual
D440-1700 Dinan Throttle Booster, D440-1700, Dinan Throttle Booster, Dinan
Booster, Throttle Booster, Booster
---|---